大多数外接麦克风都是即插即用设备。他们不需要任何特定的软件/驱动程序安装,并且主要与常规音频驱动程序一起使用。但是,如果在尝试这样做时,audio recording/input doesn’t work,并且声音设置显示与麦克风(Microphone)对应的“未插入(Not plugged in)” ,请阅读本文以获取解决方案。
麦克风(Mic)或麦克风(Microphone)未插入Windows11/10
要解决此问题,请按顺序尝试以下解决方案:
- 运行录制(Recording)音频疑难解答
- 更新Windows 系统的音频驱动程序(Audio)
- 断开其他外围设备
- 允许应用访问麦克风
- 如果禁用,请启用您的麦克风
1]运行(Run)录制音频疑难解答(Recording)
录音音频疑难解答(Recording audio troubleshooter)是检查系统麦克风问题的绝佳工具。为 Windows 10运行录制音频疑难解答(Recording audio troubleshooter)的过程如下:
- 单击开始(Start)按钮,然后转到Settings >> Updates & Security >> Troubleshoot >> Additional troubleshooter。
- 然后,从列表中选择录制音频疑难解答(Recording audio troubleshooter)并运行它。
- 为Windows 11(Windows 11)运行录制(Recording)音频疑难解答的过程如下:
- 右键单击开始(Start)按钮,然后转到Settings >> System >> Troubleshoot >> Other troubleshooters。
- 选择对应于录制音频疑难解答的(Recording audio troubleshooter)运行(Run)。
2]更新(Update)Windows系统的音频驱动程序(Audio)
如果麦克风插孔已插入,但您遇到错误“麦克风未插入(Microphone not plugged)”,则系统可能无法读取它,因为驱动程序已过时或损坏。要解决此问题,您可以为您的麦克风下载最新的驱动程序并安装它。(download the latest driver)
相关:(Related:) NVIDIA、AMD、Realtek 驱动程序无法安装。
3]断开其他外围设备
有时,USB设备可能会干扰麦克风的检测。在这种情况下,您可以考虑断开连接到USB端口的外围设备,并检查它现在是否有助于检测系统上的麦克风。
阅读:(Read:) USB 麦克风不工作
4]允许(Allow)应用访问麦克风
有时,应该允许应用程序访问麦克风的开关会关闭(OFF)。
在Windows 10中,您可以(Windows 10)打开(ON)开关以访问麦克风,如下所示:
- 单击开始(Start)按钮,然后转到Settings >> Privacy >> Microphone。
- 打开与允许应用程序访问您的麦克风关联的(Allow apps to access your Microphone)开关(ON)。
- 在Windows 11中,您可以(Windows 11)打开(ON)开关以访问麦克风,如下所示:
- 右键单击开始(Start)按钮,然后转到Settings >> Privacy & security >> Microphone。
- 打开麦克风(Microphone)访问开关(ON)。
5]启用(Enable)麦克风(如果禁用)
启用麦克风的过程如下:
- Press Win+R打开“运行”(Run)窗口并键入命令控制面板。按 Enter(Hit Enter)打开“控制面板(Control Panel)”窗口。
- 转到声音(Sounds)以打开声音(Sound)属性窗口。
- 在此窗口中,转到“录制”(Recording)选项卡。
- 右键单击(Right-click)空白区域并选择Show Disabled Devices。
- 如果您的麦克风被禁用,请启用它。
为什么我的电脑检测不到麦克风?
问题可能与驱动程序或对应用程序的访问有关。本文已解释了这两种情况的解决方案。此外,您可以考虑运行录制(Recording)音频疑难解答。
在某些情况下,可能需要Realtek Audio软件来检测麦克风,但这种情况很少见。(Realtek Audio)
如何通过一个插孔将耳机连接到 PC?
较新的系统有一个用于音频输入和输出的插槽。在这种情况下,您可以使用音频适配器(audio adapters)来解决您的问题。它们有助于将音频输入和输出信号合二为一。
Fix Microphone not plugged in Windows 11/10
Most external microphоnes are plug-and-play deviceѕ. They don’t need any specific software/driver installаtion and mоstly work with the regular audio drivers. However, if while trying to do the ѕame, the audio recording/input doesn’t work and the Sound settings show “Not plugged in” corresponding to the Microphone, then read this article for the resolution.
Mic or Microphone not plugged in Windows11/10
To fix this problem, try the following solutions sequentially:
- Run the Recording audio troubleshooter
- Update the Audio drivers for your windows system
- Disconnect other peripherals
- Allow apps to access the microphone
- Enable your microphone if disabled
1] Run the Recording audio troubleshooter
The Recording audio troubleshooter is an excellent tool to check for issues with the system microphone. The procedure to run the Recording audio troubleshooter for Windows 10 is as follows:
- Click on the Start button and go to Settings >> Updates & Security >> Troubleshoot >> Additional troubleshooter.
- Then, select the Recording audio troubleshooter from the list and run it.
- The procedure to run the Recording audio troubleshooter for Windows 11 is as follows:
- Right-click on the Start button and go to Settings >> System >> Troubleshoot >> Other troubleshooters.
- Select Run corresponding to the Recording audio troubleshooter.
2] Update the Audio drivers for your windows system
If the microphone jack is plugged in and yet you encounter the error “Microphone not plugged” then there’s a possibility that the system is unable to read it because the drivers are obsolete or corrupt. To solve this problem, you can download the latest driver for your mic and install it.
Related: NVIDIA, AMD, Realtek drivers won’t install.
3] Disconnect other peripherals
At times, USB devices could interfere with the detection of the microphone. In this case, you can consider disconnecting peripherals connected to the USB ports and check if it now helps in detecting the microphone on your system.
Read: USB microphone not working
4] Allow apps to access the microphone
At times, the switch which is supposed to allow apps to access the microphone is switched OFF.
In Windows 10, you can turn the switch to access the microphone ON as follows:
- Click on the Start button and go to Settings >> Privacy >> Microphone.
- Turn ON the switch associated with Allow apps to access your Microphone.
- In Windows 11, you can turn the switch to access the microphone ON as follows:
- Right-click on the Start button and go to Settings >> Privacy & security >> Microphone.
- Turn the switch for Microphone access ON.
5] Enable your microphone if disabled
The procedure to enable your microphone is as follows:
- Press Win+R to open the Run window and type the command control panel. Hit Enter to open the Control Panel window.
- Go to Sounds to open the Sound properties window.
- In this window, go to the Recording tab.
- Right-click on the open space and select Show Disabled Devices.
- If your microphone is disabled, enable it.
Why is my computer not detecting the microphone?
The problem might either be with the drivers or access to the applications. The resolution to both these cases has been explained in this article. Additionally, you can consider running the Recording audio troubleshooter.
In some cases, the Realtek Audio software might be required to detect the microphone, however, such situations are rare.
How do I connect my headset to PC with one jack?
Newer systems have a single slot for both audio input and output. In this case, you can use audio adapters to solve your problem. They help in combining the audio input and output signals into one.