如果您在Windows 11/10Windows 更新(Windows Update)不断自动禁用自身的问题,那么您可以尝试我们将在本文中提供的解决方案以成功解决该问题。
Reddit上的一位Windows用户报告如下:
My windows update is always disabled even when I turn the startup type to automatic. When I turn on the computer it is always disabled. This prevents me from using the Microsoft store. Please Help. I have tried the troubleshooter. When I turn the startup type to automatic and start it, it just runs for a bit before stopping”.
由于Windows 更新(Windows Update)本身中的文件损坏或与安装在 Windows 11/10 计算机上的任何第三方防病毒程序不兼容问题,可能会发生此Windows 更新不断自动禁用的问题。(Windows Update)杀毒软件可能会导致其他程序出现问题,因此Windows Update也不例外。另外,如果Windows Update服务没有正常启动,也可能会出现Windows Update一直关闭的问题。
可能的恶意软件感染也可能是自动禁用Windows 更新(Windows Update)。
Windows Update不断自动禁用自身
如果您遇到此问题,可以按以下顺序尝试我们推荐的解决方案来解决问题。
- 运行防病毒扫描
- 运行 SFC 扫描
- Disable/Uninstall 3rd方安全软件(如果适用)
- 在干净启动状态下进行故障排除
- 重置 Windows 更新组件
- 将(Set)关键的Windows 更新(Windows Update)组件设置为自动
- 修改注册表
- 执行重置(Reset)此 PC、云重置(Cloud Reset)或就地升级修复(In-place Upgrade Repair)
让我们看一下关于列出的每个解决方案所涉及的过程的描述。
1]运行防病毒扫描
此解决方案要求您使用 Windows Defender 或任何有信誉 的第三方 AV 产品(third-party AV product)运行完整的系统防病毒扫描。您还可以在启动时执行 Windows Defender 脱机扫描(perform Windows Defender Offline Scan at boot time) 或 使用可启动的 AntiVirus Rescue Media(use bootable AntiVirus Rescue Media)来清理您的计算机。
2]运行SFC扫描
如果您有系统文件错误,您可能会遇到此问题。在这种情况下,您可以运行 SFC 扫描,看看是否有帮助。
3 ] Disable/Uninstall 3rd方安全软件(如果适用)
这在很大程度上取决于您安装的安全软件。请参阅说明手册。
要禁用您的防病毒软件,请在任务栏上的通知区域或系统托盘中找到其图标(通常位于桌面的右下角)。右键单击该图标并选择禁用或退出程序的选项。
如果禁用安全软件不能解决问题,您必须使用专用删除工具(removal tool)从 PC 中删除所有第三方防病毒程序, 以删除与您的防病毒程序关联的所有文件。使用安全软件本机卸载程序工具将确保删除安装在操作系统深处的所有残留文件、注册表和依赖项,这些文件、注册表和依赖项可能与Windows 更新(Windows Update)冲突。
如果删除防病毒软件可以修复此错误,您可以切换到其他安全软件(alternative security software),或者最好仍然坚持使用Windows 10原生 AV 程序 - Windows Defender。
4]在干净启动状态下进行故障排除
您可能正在处理由第 3 方启动服务进程引起的某种干扰,这反过来又会导致Windows 更新(Windows Update)不断自动禁用自身。在这种情况下。您可以在干净启动状态下进行故障排除,(troubleshoot in Clean Boot State)看看问题是否会得到解决。否则(Else),继续下一个解决方案。
5]重置Windows Update组件
在此解决方案中,您可以 手动将每个 Windows 更新组件重置为默认值(manually reset each Windows Update components to default),看看是否有帮助。
6]将(Set)关键的Windows Update组件设置为自动
请执行下列操作:
SC config wuauserv start= auto
SC config bits start= auto
SC config cryptsvc start= auto
SC config trustedinstaller start= auto
执行命令后,重新启动设备并查看问题是否已解决。如果是后者,请尝试以下操作:
- 启动运行对话框。
- 在 Run 对话框中,键入
services.msc
并按 Enter打开 Services(open Services)。 - 在“服务(Services)”窗口中,滚动并找到Windows 更新(Windows Update)服务。
- 双击(Double-click)服务并确保启动类型(tartup typ)设置为自动(utomatic)。
- 现在,单击依赖项 (Dependencies )选项卡。
- 通过单击加(Plus)号图标展开。
- 现在,记下列表中的所有服务名称。
- 在服务(Service)管理器窗口中,找到这些服务并确保这些服务的启动类型也设置为自动。
如果问题仍未解决,请尝试下一个解决方案。
7]修改注册表
由于这是注册表操作,建议您备份注册表(back up the registry) 或 创建系统还原点 作为必要的预防措施。完成后,您可以执行以下操作:
- 在管理员模式下打开命令提示符。
- 在命令提示符窗口中,键入或复制并粘贴以下命令,然后按 Enter(Enter):
reg add “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update" /v AUOptions /t REG_DWORD /d 0 /f
命令执行成功后,输入以下命令并按Enter:
sc config wuauserv start= auto
退出CMD提示窗口并重新启动您的设备,看看问题是否已解决。如果没有,请继续下一个解决方案。
8]执行重置(Perform Reset)此PC,云重置(Cloud Reset)或就地升级修复(In-place Upgrade Repair)
此时,如果问题仍未解决,则很可能是由于某种常规无法解决的系统损坏。在这种情况下,这里适用的解决方案是您可以尝试重置此电脑(Reset This PC)或云重置(Cloud Reset)来重置每个Windows组件。您也可以尝试就地升级修复,看看是否有帮助。
这些解决方案中的任何一个都应该适合您!
Windows Update keeps disabling itself automatically in Windows 11/10
If you’re experienсing an isѕue where Windows Updаte keeps disabling itself autоmatically in Windows 11/10, then you can try the solυtions that we will provide in this post to successfully resolve the issue.
A Windows user on Reddit reported as follows:
My windows update is always disabled even when I turn the startup type to automatic. When I turn on the computer it is always disabled. This prevents me from using the Microsoft store. Please Help. I have tried the troubleshooter. When I turn the startup type to automatic and start it, it just runs for a bit before stopping”.
This issue of Windows Update keeps disabling itself automatically can happen due to a corrupt file in the Windows Update itself or due to incompatibility issues with any third-party antivirus program installed on your Windows 11/10 computer. The antivirus software may cause issues with other programs, so there is no exception for Windows Update. In addition, If the Windows Update service is not started properly, the issue that Windows Update keeps turning off also may occur.
A possible malware infection could also be auto disabling Windows Update.
Windows Update keeps disabling itself automatically
If you’re faced with this issue, you can try our recommended solutions in the order presented below to resolve the issue.
- Run antivirus scan
- Run SFC scan
- Disable/Uninstall 3rd party security software (if applicable)
- Troubleshoot in Clean Boot state
- Reset Windows Update components
- Set critical Windows Update components to automatic
- Modify the registry
- Perform Reset This PC, Cloud Reset or In-place Upgrade Repair
Let’s take a look at the description of the process involved concerning each of the listed solutions.
1] Run antivirus scan
This solution requires you to run a full system antivirus scan with Windows Defender or any reputable third-party AV product. You can also perform Windows Defender Offline Scan at boot time or use bootable AntiVirus Rescue Media to clean your computer.
2] Run SFC scan
If you have system file errors, you may encounter this issue. In which case, you can run an SFC scan and see if that helps.
3] Disable/Uninstall 3rd party security software (if applicable)
This largely depends on the security software you have installed. Refer to the instruction manual.
To disable your antivirus software, locate its icon in the notification area or system tray on the taskbar (usually in the lower right corner of the desktop). Right-click the icon and choose the option to disable or exit the program.
If disabling the security software doesn’t fix the issue, you’ll have to remove all third-party antivirus programs from your PC using the dedicated removal tool to remove all files associated with your antivirus program. Using the security software native uninstaller tool will ensure all residual files, registries and dependencies installed deep within the OS, which can be conflicting with Windows Update is removed.
If removing the antivirus fixes this error, you can switch to alternative security software or better still stick to Windows 10 native AV program – Windows Defender.
4] Troubleshoot in Clean Boot state
Chances are you’re dealing with some kind of interference caused by a 3rd-party process of startup service, which in turn causes Windows Update to keep disabling itself automatically. In this case. you can troubleshoot in Clean Boot State and see if the issue will be resolved. Else, continue with the next solution.
5] Reset Windows Update components
In this solution, you can manually reset each Windows Update components to default and see if that helps.
6] Set critical Windows Update components to automatic
Do the following:
- Press Windows key + R to invoke the Run dialog.
- In the Run dialog box, type
cmd
and then press CTRL + SHIFT + ENTER to open Command Prompt in admin/elevated mode. - In the command prompt window, type the commands below one after the other and hit Enter after each line:
SC config wuauserv start= auto
SC config bits start= auto
SC config cryptsvc start= auto
SC config trustedinstaller start= auto
After executing the commands, restart your device and see if the issue is resolved or not. If the latter is the case, try the following:
- Launch the Run dialog box.
- In the Run dialog box, type
services.msc
and hit Enter to open Services. - In the Services window, scroll and locate the Windows Update service.
- Double-click on the service and make sure Startup type is set to Automatic.
- Now, click on Dependencies Tab.
- Expand By clicking the Plus sign icon.
- Now, note down all the services name from the list.
- In the Service manager window, locate these services and make sure that the startup type of these services is also set to automatic.
If the issue is still unresolved, try the next solution.
7] Modify the Registry
Since this is a registry operation, it is recommended that you back up the registry or create a system restore point as necessary precautionary measures. Once done, you can proceed as follows:
- Open Command Prompt in admin mode.
- In the command prompt window, type or copy and paste in the command below and hit Enter:
reg add “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update" /v AUOptions /t REG_DWORD /d 0 /f
Once the command executes successfully, input the command below and hit Enter:
sc config wuauserv start= auto
Exit CMD prompt window and restart your device and see if the issue is resolved. If not, proceed with the next solution.
8] Perform Reset This PC, Cloud Reset or In-place Upgrade Repair
At this point, if the issue is still unresolved, it’s most likely due to some kind of system corruption that cannot be resolved conventionally. In this case, the applicable solution here is that you can try Reset This PC, or Cloud Reset to reset every Windows component. You may also try In-place Upgrade Repair and see if that helps.
Any of these solutions should work for you!