在Windows 11/10/8/7/Vista OS公共^(Public)或私有^(Private)场景中选择一个网络，以便您可以与范围内的设备共享它。对于公共场所的^(Public)网络^(Network)，您不需要共享它，如果您的系统仅限于您的家庭或私人场所，您可以允许共享到设备。此设置可以在“网络”部分的“控制面板^(Network)”中进行管理。^{(Control Panel)}

但是，如果您导航到不同的地方并且需要在短时间内更改网络的共享设置，则存在更短的方法，您可以使用这些方法轻松配置这些设置。^(Network)在本文中，我们将讨论允许或禁止与您连接的网络共享的不同方法。

阅读^(Read)：公共网络和专用网络之间的区别。

将网络状态^{(Change Network Status)}从公共^(Public)更改为私有

1]使用设置更改网络状态^{(Change Network Status)}

一般来说，在Windows Windows 10/8/7中，您可以单击任务栏网络^{(Taskbar Network)}图标 >选择网络^(Select)Netwprk > Properties并在此处进行必要的操作。

在Windows 10中，要将网络状态^{(Network Status)}从Public更改为 Private，反之亦然，您可以：

1. 打开设置
2. 选择网络和 Internet
3. 点击 WiFi 部分
4. 点击网络
5. 在下一个面板中，选择Private或Public。

在Windows 8.1中，按键盘上的Windows Key + I组合以显示设置^(Settings)超级按钮。现在在底部，单击那里的网络^(Network)图标。或者，您可以单击任务栏通知区域中的网络^(Network)图标。

现在在网络^(Networks)部分，右键单击您要更改其状态的网络，选择打开或关闭共享^{(Turn sharing on or off)}。

最后，您可以选择网络的私有^(Private)和公共^(Public)状态。如果您选择是，打开共享或连接到设备^{(Yes, turn on sharing or connect to devices)}，网络将切换到私有^{( Private)}状态。

2]使用组策略编辑器^{(Group Policy Editor)}更改网络状态^{(Change Network Status)}

1.按Windows Key + R组合并将gpedit.msc放入运行^(Run)对话框。

2.在左侧窗格中导航到：

Computer Configuration -> Windows Settings -> Security Setting -> Network List Manager Policies

3.现在在上面显示的窗口中，右键单击您要更改其状态的网络，然后单击属性^(Properties)。

继续前进，在“属性^(Properties)”窗口中，您可以轻松选择网络的状态。做出选择后单击应用^(Apply)，然后单击确定。^(OK)

3]使用命令提示符^{(Command Prompt)}更改网络状态^{(Change Network Status)}

打开管理命令提示符^{(administrative Command Prompt)}并粘贴以下命令并按Enter：

netsh wlan delete profile name="HomeNetwork"

此命令将删除公共^(delete)网络^(Public)配置文件，您可以重新连接网络，这次您可以在连接时选择私有^(Private)模式。

如果您希望显示系统上列出的所有网络配置文件的名称，可以通过在命令提示符处执行^{(Command Prompt)}netsh wlan show profiles命令来显示它们。

希望您发现该提示有用。^{(Hope you find the tip useful.)}

How to change Network Status from Public to Private in Windows 11/10

In Windows 11/10/8/7/Vista OS, you have the options to choose a network from Public or Private scenarios so that you can share it with the devices in range. For Network in Public places, you do not need to share it while if your system is confined to your home or private place, you can allow the sharing to the devices. This setting could be managed in the Control Panel under the hood of Network section.

However, if you navigate to different places and need to change out the sharing settings of the Network at short notice, there exist shorter ways, using which you can easily configure these settings. In this article, we’ll discuss the different ways to make sharing allowed or disallowed with the network you’re connected with.

Read: Difference between Public Network and Private Network.

Change Network Status from Public to Private

1] Change Network Status using Settings

Generally speaking, in Windows 10/8/7 you can click on the Taskbar Network icons > Select the Netwprk > Properties and do the needful here.

In Windows 10, to change Network Status from Public to Private or vise versa, you can:

1. Open Settings
2. Select Network and Internet
3. Click WiFi section
4. Click on the network
5. In the next panel, select Private or Public.

In Windows 8.1, press Windows Key + I combination on the keyboard to reveal the Settings charm. Now in the bottom, click on the Network icon there. Alternatively, you can click on the Network icon in the notification area on the taskbar.

Now in the Networks section, right-click over the network whose status you’re looking for to change, select Turn sharing on or off.

Finally, you have the options to select between Private and Public status for your network. If you select Yes, turn on sharing or connect to devices, the network will be switched to Private status.

2] Change Network Status using Group Policy Editor

1. Press Windows Key + R combination and put gpedit.msc in Run dialog box.

2. In the left pane navigate to:

Computer Configuration -> Windows Settings -> Security Setting -> Network List Manager Policies

3. Now in the above-shown window, right-click on the network whose status you’re looking to change for and click Properties.

Moving on, in the Properties window, you can easily select the status for the network. Click Apply followed by OK after making your choice.

3] Change Network Status using Command Prompt

Open an administrative Command Prompt and paste the following command and hit Enter:

netsh wlan delete profile name="HomeNetwork"

This command will delete the Public network profile and you can reconnect the network and this time you can select the Private mode at the time of connecting.

If you wish to show the name of all the network profiles listed on your system, you can reveal them by executing netsh wlan show profiles command at the Command Prompt.

Hope you find the tip useful.

Related posts

• 选项来改变Network从Public在Windows 11/10私人失踪

• 启用Network Connections而在Modern Standby上Windows 10

• 如何在地图上Network Drive或Windows 11/10添加FTP Drive

• 如何在Windows 10上管理Data Usage Limit

• 如何启用DNS了在Windows 10 HTTPS

• SmartByte Network Service在Windows 10上导致慢速Internet speed

• 如何将WebDAV映射为Windows 11/10的Network Drive

• 为什么我的ping Time在Windows 11/10中如此之高？

• 如何在Windows 10上启用Windows Defender中的Network扫描

• 在Windows 10上更新接口Ethernet时发生错误

• 如何在Windows 11/10检查哪些端口或阻止

• Windows无法从Windows 10中的路由器获取Network Settings

• 如何在Windows 10中更改LAN Manager Authentication Level

• NetTraffic：实时Network traffic监视器Windows 10

• Manage Wireless Networks在Windows 10中使用Command Prompt

• Windows 10中的MAC Address：Change，Lookup，欺骗

• 如何在Windows 10中删除Network folder中的Thumbs.db Files

• Windows 10中的Stop自动连接到Wireless Network

• Windows 11/10上的Fix No internet，Secured WiFi error [固定]

• 免费MAC Address Changer Tools用于Windows 11/10