在 Windows 安装过程中是否收到错误 0x80300024？^{(Do you get error 0x80300024 during Windows installation?)}错误 0x80300024 不限于任何特定版本的Windows，因此可能在安装任何/所有这些版本期间发生。即使任何Windows版本都可能出现错误 0X80300024，但在安装或重新安装^(Windows)Windows 7 和Windows 10操作系统时最常见。升级到Windows 10时也会出现此问题。今天，我们将修复Windows 10安装错误 0x80300024。随着 Windows 11指日可待，您的 Windows 10 操作系统必须无故障运行。那么，让我们开始吧！

如何修复 Windows 10 安装错误 0x80300024^{(How to Fix Windows 10 Installation Error 0x80300024)}

错误 0X80300024 表示Windows^(Windows)安装文件所在的硬盘分区存在软件或硬件相关问题。许多其他因素也可能触发此错误：

• ^{(Insufficient space)}硬盘空间不足。
• Windows 安装介质^{(broken Windows installation medium)}损坏或损坏。
• 损坏的硬盘^{(Corrupt hard drive)}。
• 安装介质插入损坏的 USB 端口^{(damaged USB port)}。
• 不兼容的硬盘驱动器和驱动软件^{(Incompatible Hard drive and driver software)}。
• ^{(Loose connection)}安装驱动器与安装目标之间的连接松动。
• 硬件或软件故障^{(software malfunctioning)}。

现在，让我们讨论修复Windows 10安装错误 0x80300024 的各种方法。

方法 1：移除辅助硬盘^{(Method 1: Remove Supplementary Hard Drive)}

如果您使用了多个硬盘驱动器，则可以将其中任何一个指定为安装位置。在安装过程中，辅助驱动器与目标驱动器发生冲突。如果是这种情况，安装Windows^(Windows)操作系统时可能会出现错误 0x80300024 。为解决此类冲突，

• 我们建议您从计算机上卸下辅助硬盘驱动器^{(remove the supplementary hard drive)}。
• 然后，再次尝试安装^{(try installing)}操作系统。
• 成功安装Windows后，您可以重新连接硬盘驱动器。^{(reconnect the hard drive.)}

方法 2：连接到不同的 USB 端口
^{(Method 2: Connect to a Different USB Port )}

使用包含Windows^(Windows)安装介质的可启动USB驱动器安装Windows时，由于USB端口出现故障，可能会出现错误 0x80300024。在这种情况下，您应该：

• 考虑在没有 USB 驱动器的情况下安装 Windows^{( installing Windows without the USB drive)}。
• 将其插入另一个 USB 端口 —将 USB 2.0 端口与 USB 3.0 端口交换^{(swap the USB 2.0 port with the USB 3.0 port)}，反之亦然。

另请阅读：^{(Also Read:)} USB 2.0、USB 3.0、eSATA、Thunderbolt 和 FireWire 端口之间的区别^{(Difference between USB 2.0, USB 3.0, eSATA, Thunderbolt, and FireWire ports)}

方法3：释放磁盘空间^{(Method 3: Free up disk space)}

Windows 10安装错误 0x80300024 也可能是由于计算机磁盘空间不足造成的。因此，您需要释放硬盘驱动器上的空间，以便正确存储和安装Windows安装文件。^(Windows)下面列出了解决存储空间问题的两种方法。

选项 1：删除不需要的数据^{(Option 1: Delete Unrequired Data )}

• 删除临时文件。
• 删除^(Delete)不需要或无用的文件和文件夹。

选项 2：格式化硬盘^{(Option 2: Format the Hard-drive)}

1.Insert/plug安装介质并重新启动计算机^{(restart the computer)}。

2. 之后，接受^{(Accept )}许可条款并选择首选语言^(language)。

3. 从您想要哪种安装类型中选择自定义^{(Which type of installation do you want?)}？^{( Custom)}屏幕，如下所示。

4. 要格式化目标驱动器，请单击Drive Options，如图所示。

5. 选择合适的分区^(partition)后，点击删除^(Delete)。

6. 要重新开始^(restart)安装，请单击下一步。^(Next.)

这将格式化所选驱动器并释放磁盘空间，以便您可以安装Windows而不会出现任何错误。

方法 4：将目标硬盘设置为首选
^{(Method 4: Set Target Hard Drive as First Choice )}

Windows安装目标盘可能未指定为主引导盘，因此导致错误 0x80300024。请按照以下步骤手动将所需磁盘修复为主硬盘：

1.启动^(Start)电脑，进入电脑BIOS 设置^(setup)。

注意：^(Note:)为此，您可能需要按F1、F2或Del键。访问BIOS屏幕的键因计算机制造商和设备型号而异。

2.在 BIOS 设置中查找您的 PC启动顺序^{(Boot order)}/配置。^{(configuration )}

3. 检查目标硬盘驱动器^{(Hard Drive)}是否是引导顺序中的第一选择。如果不是，则将其设置为首选。^{(First choice.)}

4.保存^{(Save the modifications)}您所做的修改，然后退出^(exit) BIOS。

另请阅读：^{(Also Read:)} 6 Ways to Access BIOS in Windows 10 (Dell/Asus/ HP)

方法 5：使用 DiskPart^{(Method 5: Use DiskPart)}

由于硬盘分区表损坏，也可能发生此 Windows 安装错误 0x80300024。以下是解决方法：

1.通过在Windows 搜索^{(Windows search)}栏中搜索cmd从开始^(Start)菜单打开^(Menu)命令提示符，如图所示。^{(Command Prompt)}

2. 键入Diskpart并按Enter 键^(key)。

3. 如图所示键入List Disk，以获取所有设备分区的列表。

4. 当设置列出所有分区时，请注意系统分区。^{(System partition.)}

5. 键入Select Disk 1，同时将1替换为系统分区的分区号^{(partition number)}。

6.输入Clean并 回车^(Enter)执行。

方法六：格式化安装分区
^{(Method 6: Format the Installation Partition )}

如果您尝试安装Windows的^(Windows)HDD分区最近没有生成，则安装过程可能会受到该驱动器上现有数据的阻碍。因此，在安装^(Therefore)Windows之前格式化安装分区对于解决或完全避免问题至关重要。

1.插入可引导的 Windows 安装光盘后^{(bootable Windows installation disc)}重新启动^(Restart)计算机。

2. 在BIOS屏幕中，选择从您在步骤 1 中插入的安装媒体启动。^{(boot from the installation media)}

3. 现在，选择您的键盘布局、语言^{(keyboard layout, language)}和其他设置。

4. 弹出通知时，选择自定义：仅安装 Windows（高级^{(Custom: Install Windows Only (advanced)}）选项，如下图所示。

5. 单击Windows 设置^{(Windows Setup)}屏幕上的驱动器选项，提示^{(Drive options)}您要在哪里安装 Windows？^{(Where do you want to install Windows?)}

6. 选择要安装 Windows 的硬盘分区，然后选择^(H)格式化^{(ard Drive partition)}。^(Format.)

7.确认^(Confirm)格式化过程并让它完成。

8. 然后，要继续安装Windows，请单击下一步。^{(Next. )}

另请阅读：^{(Also Read:)} 如何在 Windows 10 上格式化硬盘^{(How to Format Hard Drive on Windows 10)}

方法 7：检查外设连接^{(Method 7: Check Peripheral Connections)}

如果您遇到错误 0x80300024 的问题，您应该仔细检查所有外围设备是否已正确连接。

1. 确保安装驱动器和安装位置之间保持稳定的连接。^{(steady connection)}

2、确定安装位置是否有足够的空间^{(sufficient space)}。

3.检查完所有内容后，重新启动计算机^{( restart the computer)}以消除小故障和错误。

方法 8：购买新硬盘^{(Method 8: Purchase a New HDD)}

如果我们上面提供的解决方案都无法解决错误 0x80300024，那么可能是时候考虑购买新硬盘了。您 PC 上的硬盘驱动器可能有缺陷，从而导致Windows安装过程出现问题。购买新硬盘并将其连接到您的计算机。上述错误应该得到纠正，您在安装Windows 10^{(Windows 10)}期间不应再遇到错误。

受到推崇的：^{(Recommended:)}

• 修复 Windows 10 无法从 USB 启动^{(Fix Windows 10 won’t boot from USB)}
• 如何修复错误代码 0x80004005^{(How to Fix Error Code 0x80004005)}
• 如何在没有光盘的情况下安装 Windows 7^{(How to Install Windows 7 Without a Disc)}
• 为游戏优化 Windows 10 的 18 种方法^{(18 Ways to Optimize Windows 10 for Gaming)}
• 修复 Steam 应用程序加载错误 3:0000065432^{(Fix Steam Application Load Error 3:0000065432)}

我们希望您能够在我们的指南的帮助下修复^(Fix) Windows 10 安装错误 0x80300024 。^{(Windows 10 installation error 0x80300024)}让我们知道哪种方法适合您。如果您有任何疑问/建议，请将它们放在评论框中。

How to Fix Error 0x80300024

Do you get error 0x80300024 during Windows installation? Error 0x80300024 is not restricted to any particular version of Windows and thus, can occur during installation on any/all of these. Even though error 0X80300024 can occur on any Windows version, it is most commonly seen when installing or reinstalling Windows 7 and Windows 10 operating systems. This issue also occurs while upgrading to Windows 10. Today, we will fix Windows 10 installation error 0x80300024. With Windows 11 just around the corner, it is imperative that your Windows 10 operating system functions glitch-free. So, let us begin!

How to Fix Windows 10 Installation Error 0x80300024

The error 0X80300024 indicates that there is a problem, either software or hardware related, with the hard drive partition where Windows installation files are located. Many other factors can also trigger this error:

• Insufficient space on the hard disk.
• Corrupt or broken Windows installation medium.
• Corrupt hard drive.
• Installation media plugged into a damaged USB port.
• Incompatible Hard drive and driver software.
• Loose connection between the installation drive and the installation destination.
• Hardware or software malfunctioning.

Now, let us discuss the various methods to fix Windows 10 installation error 0x80300024.

Method 1: Remove Supplementary Hard Drive

If you have employed more than one hard drive, either of them can be assigned as the installation location. During the installation procedure, the supplementary drive comes into conflict with the destination drive. If this is the case, error 0x80300024 may appear while installing Windows operating system. To resolve such conflicts,

• We recommend that you remove the supplementary hard drive from the computer.
• Then, try installing the operating system again.
• After you’ve successfully installed Windows, you can reconnect the hard drive.

Method 2: Connect to a Different USB Port

While installing Windows using a bootable USB drive containing Windows installation media, error 0x80300024 might occur due to malfunctioning USB port. In such scenarios, you should:

• Consider installing Windows without the USB drive.
• Plug it into another USB port — swap the USB 2.0 port with the USB 3.0 port, or vice versa.

Also Read: Difference between USB 2.0, USB 3.0, eSATA, Thunderbolt, and FireWire ports

Method 3: Free up disk space

The Windows 10 installation error 0x80300024 can also be caused by the lack of disk space on your computer. Thus, you’ll need to free up space on your hard drive so that Windows installation files may be stored and installed properly. Listed below are two ways to resolve storage space issues.

Option 1: Delete Unrequired Data

• Delete temporary files.
• Delete unwanted or useless files & folders.

Option 2: Format the Hard-drive

1. Insert/plug the installation media and restart the computer.

2. After that, Accept the licensing terms and select the preferred language.

3. Choose Custom from the Which type of installation do you want? screen, as highlighted below.

4. To format the destination drive, click Drive Options, as shown.

5. After selecting the appropriate partition, click Delete.

6. To restart the installation, click Next.

This will format the selected drive and free up disk space so that you can install Windows without any errors.

Method 4: Set Target Hard Drive as First Choice

It is possible that the Windows installation destination disc isn’t specified as the primary boot disc, thus, resulting in error 0x80300024. Follow the steps below to fix the desired disk as primary hard-drive manually:

1. Start the computer and go to the computer BIOS setup.

Note: To do so, you may need to hit the F1, F2, or Del keys. The key to access the BIOS screen differs depending on the computer manufacturer & device model.

2. Look for your PC Boot order/ configuration in the BIOS setup.

3. Check if the destination Hard Drive is the first choice in the boot order. If not, then set it as the First choice.

4. Save the modifications you’ve made and exit BIOS thereafter.

Also Read: 6 Ways to Access BIOS in Windows 10 (Dell/Asus/ HP)

Method 5: Use DiskPart

This Windows installation error 0x80300024 might also occur due to a corrupt hard drive partition table. Here’s how to fix it:

1. Open Command Prompt from the Start Menu by searching cmd in the Windows search bar, as shown.

2. Type Diskpart and press Enter key.

3. Type List Disk as shown, to get a list of all device partitions.

4. While the setup is listing all the partitions, note the System partition.

5. Type Select Disk 1 while replacing 1 with the partition number of the system partition.

6. Type Clean and hit Enter to execute.

Method 6: Format the Installation Partition

If the HDD partition on which you’re trying to install Windows has not been generated recently, the installation process may get hampered by the existing data on that drive. Therefore, formatting the installation partition before installing Windows is essential to resolve the issue or avoid it altogether.

1. Restart the computer after inserting a bootable Windows installation disc.

2. In the BIOS screen, select to boot from the installation media you inserted in Step 1.

3. Now, choose your keyboard layout, language, and other settings.

4. When the notification pops up, choose the Custom: Install Windows Only (advanced) option, as depicted below.

5. Click Drive options on the Windows Setup screen prompting Where do you want to install Windows?

6. Select the Hard Drive partition where you want Windows to be installed and choose Format.

7. Confirm the formatting process and let it finish.

8. Then, to continue installing Windows, click Next.

Also Read: How to Format Hard Drive on Windows 10

Method 7: Check Peripheral Connections

If you’re having trouble with error 0x80300024, you should double-check that all of your peripherals are connected properly.

1. Ensure that a steady connection is maintained between the installation drive and the installation location.

2. Determine whether the installation location has sufficient space or not.

3. Once you’ve checked everything, restart the computer to get rid of minor glitches and bugs.

Method 8: Purchase a New HDD

If none of the solutions we offered above have been able to address error 0x80300024, it may be time to consider purchasing a new hard drive. The hard drive on your PC may be defective, thereby causing problems in the Windows installation process. Buy a new hard drive and connect it to your computer. The said error should be rectified and you should no longer face errors during the installation of Windows 10.

Recommended:

• Fix Windows 10 won’t boot from USB
• How to Fix Error Code 0x80004005
• How to Install Windows 7 Without a Disc
• 18 Ways to Optimize Windows 10 for Gaming
• Fix Steam Application Load Error 3:0000065432

We hope you were able to Fix Windows 10 installation error 0x80300024 with the help of our guide. Let us know which method worked for you. If you have any queries/ suggestions drop them in the comment box.

Related posts

• Fix Error 0X80010108在Windows 10中

• 如何Fix Application Error 0xc0000005

• Fix Windows Update Error Code 0x80072efe

• 如何Fix Application Load Error 5:0000065434

• Fix BAD_SYSTEM_CONFIG_INFO Error

• Fix U-Verse Modem Gateway Authentication Failure Error

• Windows 10上的Fix Device不是Migrated Error

• Fix Could不是Steam Network Error的Connect

• Fix Windows Update Error 80246008

• Fix Windows Update Error 0x80070020

• Fix Media Creation Tool Error 0x80042405-0xa001a

• Fix Omegle Error Connecting至Server（2021）

• 如何Fix Application Error 0xc000007b

• Fix Windows Update Error 0x80080005

• Fix Windows Installer Access Denied Error

• 修复Windows无法Connect到此Network Error

• Xfinity Stream上的Fix Error TVAPP-00100

• Fix io.netty.channel.abstractchannel $ AnnotatedConnectException Error在Minecraft

• Fix PAGE_FAULT_IN_NONPAGED_AREA Error

• Fix System Restore Error 0x80070091