默认情况下，当您将新驱动器添加到Windows 11/10中的升级池时，将选中优化以将现有数据分布到所有驱动器^{(Optimize to spread existing data across all drives)}框。但是，如果您在升级池之前取消选中该复选框或添加了驱动器，则需要手动优化驱动器的使用。优化^(Optimizing)会将您的一些数据移动到新添加的驱动器，以充分利用池的容量。在这篇文章中，我们将向您展示如何优化Windows 11/10中存储空间^{(Storage Spaces)(optimize Drive Usage in Storage Pool for Storage Spaces)}的存储池中的驱动器使用情况。

优化^{(Optimize Drive Usage)}存储^(Storage)池中^{(Storage Pool)}存储空间的驱动器使用情况

我们可以通过 3 种快速简便的方法优化Windows 10中存储^(Storage)空间^(Spaces)的存储池中^{(Storage Pool)}的驱动器使用情况。^{(Drive Usage)}我们将在本节下面概述的方法下探索这个主题：

让我们看一下与每种方法相关的分步过程的描述。

1]通过设置应用程序

要通过Windows 11/10设置^(Settings)应用程序优化存储池中^{(Storage Pool)}存储空间的^{(Storage Spaces)}驱动器使用情况^{(Drive Usage)}，请执行以下操作：

• 按Windows key + I 打开设置^{(open Settings)}。
• 点击或单击系统^(System)。
• 单击左侧窗格中的存储。^(Storage)
• 接下来，向下滚动并单击右侧窗格中的管理存储空间链接。^{(Manage Storage Spaces)}
• 单击^(Click)V 形符号以展开要优化驱动器使用的存储池。
• 单击存储池。
• 点击优化^(Optimize)。驱动器^(Drive)使用优化过程现在将开始，直到完成。

注意^(Note)：优化可能会使您的 PC 变慢一段时间，但如果需要，您可以取消它而不会丢失您的进度。

• 该过程完成后，您可以退出设置^(Settings)应用程序。

2]通过控制面板

要通过Windows 10中的控制面板^{(Control Panel)}优化存储池中^{(Storage Pool)}存储空间的^{(Storage Spaces)}驱动器使用情况^{(Drive Usage)}，请执行以下操作：

• 按Windows key + R调用“运行”对话框。
• 在“运行”对话框中，键入control并按 Enter 以打开“控制面板^{(open Control Panel)}” 。
• 从窗口的右上角，将查看方式^{(View by)} 选项设置为 大图标或小图标^{(Large icons or Small icons)}。
• 如果UAC^(UAC.) 提示， 单击更改设置^{(Change settings)}按钮并单击是。^(Yes)
• 单击所需存储池的优化驱动器使用^{(Optimize drive usage)} 链接。
• 单击优化驱动器使用^{(Optimize drive usage)}按钮以启动该过程。
• 完成后，退出控制面板。

3]使用PowerShell

要通过Windows 10中的PowerShell优化存储池中^{(Storage Pool)}存储空间的^{(Storage Spaces)}驱动器使用情况^{(Drive Usage)}，请执行以下操作：

• 按Windows key + X打开高级用户菜单。
• 点击键盘上的A以^(A)在管理员模式下启动 PowerShell^{(launch PowerShell in admin mode)}。
• 在PowerShell控制台中，键入以下命令并按Enter：

Get-StoragePool

• 记下 要优化的存储池的友好名称。^{(friendly name)}
• 现在，在提升的PowerShell^(PowerShell)窗口中键入以下命令，然后按 Enter^(Enter)。将 < Name>占位符替换为您之前从输出中记下的存储池的实际友好名称。

Optimize-StoragePool -FriendlyName "<Name>"

• 完成后退出 PowerShell。

这就是在Windows 10中优化^{(Windows 10)}存储^(Storage)池中^{(Storage Pool)}存储空间的^(Spaces)驱动器使用^{(Drive Usage)}的三种方法！

阅读下一篇^{(Read next)}：如何从存储池中删除驱动器以获取存储空间^{(How to Remove Drive from Storage Pool for Storage Spaces)}？

Optimize Drive Usage in Storage Pool for Storage Spaces in Windows

By default, when you add a new drive tо an upgraded pool in Windows 11/10, the Optimize to spread existing data across all drives box will be checked. However, if you deselected that check box or added drives before upgrading a pool, you’ll need to manually optimize drive usage. Optimizing will move some of your data to the newly added drive to make the best use of the pool’s capacity. In this post, we will show you how to optimize Drive Usage in Storage Pool for Storage Spaces in Windows 11/10.

Optimize Drive Usage in Storage Pool for Storage Spaces

We can optimize Drive Usage in Storage Pool for Storage Spaces in Windows 10 in 3 quick and easy ways. We’ll explore this topic under the methods outlined below in this section:

Let’s take a look at the description of the step-by-step process in relation to each of the methods.

1] Via Settings app

To optimize Drive Usage in Storage Pool for Storage Spaces via Settings app in Windows 11/10, do the following:

• Press the Windows key + I to open Settings.
• Tap or click System.
• Click Storage on the left pane.
• Next, scroll down and click on the Manage Storage Spaces link on the right pane.
• Click on the chevron to expand a storage pool you want to optimize drive usage for.
• Click on the storage pool.
• Click Optimize. Drive usage optimization process will now commence until complete.

Note: Optimization might slow down your PC for a while, but you can cancel it without losing your progress if needed.

• Once the process completes, you can exit Settings app.

2] Via Control Panel

To optimize Drive Usage in Storage Pool for Storage Spaces via Control Panel in Windows 10, do the following:

• Press Windows key + R to invoke the Run dialog.
• In the Run dialog box, type control and hit Enter to open Control Panel.
• From the top right corner of the window, set the View by option to Large icons or Small icons.
• Click the Change settings button and click Yes if prompted by UAC.
• Click on the Optimize drive usage link for the storage pool you want.
• Click the Optimize drive usage button to start the process.
• Once done, exit Control Panel.

3] Using PowerShell

To optimize Drive Usage in Storage Pool for Storage Spaces via PowerShell in Windows 10, do the following:

• Press Windows key + X to open Power User Menu.
• Tap A on the keyboard to launch PowerShell in admin mode.
• In the PowerShell console, type in the command below and hit Enter:

Get-StoragePool

• Make note of the friendly name of the storage pool you want to optimize.
• Now, type the command below into the elevated PowerShell window and hit Enter. Substitute the <Name> placeholder with the actual friendly name of the storage pool you made a note of from the output previously.

Optimize-StoragePool -FriendlyName "<Name>"

• Exit PowerShell when done.

That’s it on the three ways to optimize Drive Usage in Storage Pool for Storage Spaces in Windows 10!

Read next: How to Remove Drive from Storage Pool for Storage Spaces?

Related posts

• Storage Storage Storage Remove Drive Storage Storage在Windows 10中

• Storage Pool的Storage Pool Storage Spaces Windows 10

• 如何在Windows 10 Storage Pool中更改Storage Spaces

• 如何在Windows 10中重命名Storage Spaces的Storage Pool

• 如何在Windows 10 Storage Pool创建Storage Spaces

• 如何使用 Windows 10 上的存储空间进行数据备份

• 如何在Windows 10中将驱动器添加到Storage Spaces到Storage Pool

• 如何在Windows 10上管理Data Usage Limit

• 如何钉住Folder or Drive在Windows 10的Taskbar

• 如何为双引导系统创建共享存储驱动器

• 如何使用 Windows 10 FTP 站点设置私有云存储

• 更改Windows Updates Delivery Optimization Cache Drive

• 如何在 Windows 10 上禁用保留存储

• Fix High Disk & Memory Usage在Windows PC玩游戏时

• Google Drive在Windows PC上保持崩溃

• 6 Ways至Fix Problem Ejecting USB Mass Storage Device

• Windows不能在Windows 10中access Shared Folder or Drive

• Google Drive vs Dropbox：特点，Software，Storage计划Comparision

• 如何在Windows 11/10启用或禁用RUDIDED Storage

• 如何删除Windows 10中的存储空间Storage Pool