您可能想要在Windows 11中启用或禁用(Windows 11)Wi-Fi的原因有很多。例如，您可能根本不使用Wi-Fi，或者您的无线连接出现问题，突然断开连接。或者您可能无法在 Windows 11 PC 上连接到Wi - (Windows 11)Fi(Wi-Fi)，您必须禁用Wi-Fi，然后再次启用它。无论如何(Regardless)，如果您需要在Windows 11上启用或禁用(Windows 11)Wi-Fi，这里有六种不同的方法：
1. 如何在Windows 11中通过任务栏打开或关闭Wi-Fi
在Windows 11(Windows 11) PC上禁用或启用 Wi-Fi 的最简单方法之一是通过其任务栏。在右侧，在所谓的系统托盘中，在音量图标旁边，有一个网络图标，显示您当前的互联网连接。您看到的图标可以说明：
- 无线连接，这意味着您现在已连接到 Wi-Fi 网络
- 一台计算机和一根小型以太网(Ethernet)电缆，这意味着您已连接到有线网络
- 一个带有禁用标记的地球仪，表示没有互联网连接。
Windows 11任务栏中的系统图标
无论您在 Windows 11 任务栏上看到什么图标，单击或点击它。或者，您也可以使用键盘快捷键Windows + A。这会打开一个带有几个快速设置(quick settings)的弹出窗口，以及您可能在 PC 上收到的任何通知。其中，应该还有一个Wi-Fi按钮，如下所示：
Windows 11快速操作中的 Wi-Fi 按钮飞出
如果它是彩色的并且其下方显示网络名称或可用(Available)消息，则表示您的Wi-Fi已启用，并且您已连接到无线网络或附近至少有一个Wi-Fi可用。要在Windows 11上禁用Wi-Fi，请单击或点击按钮的左侧。
如何在 Windows 11 中禁用 Wi-Fi
如果该按钮没有您的 Windows 11 强调色，并且在它下面唯一写的是Wi-Fi，那么您的无线网卡被禁用。要在Windows 11上启用Wi-Fi ，请单击(Wi-Fi)Wi-Fi按钮的左侧。
如何在 Windows 11 中启用 Wi-Fi
请注意，在Windows 11上使用此方法启用或禁用(Windows 11)Wi-Fi的速度也稍慢一些。不要按左侧的Wi-Fi按钮，而是单击或点击它旁边的插入符号。
打开可用无线网络列表
如果您的Wi-Fi(Wi-Fi)已打开，这将打开可用无线网络的列表，或者如果出现这种情况，则会弹出告诉您您的Wi-Fi已关闭的弹出框。
无论哪种方式，您还可以在弹出窗口的右上角获得一个开关，您可以使用它来启用或禁用Windows 11上的 Wi-Fi 。
无线网络列表中的 Wi-Fi 开关
提示：(TIP:)在Windows 11中启用(Windows 11)Wi-Fi芯片后，以下是连接 Wi-Fi 的方法(how to connect to Wi-Fi)。
2. 如何从设置中启用或禁用 Windows 11 上的 Wi-Fi
另一种启用或禁用 Wi-Fi 的简单方法是通过“设置”(Settings )应用程序提供。打开它(Open it)，前往网络和互联网(Network & internet)类别，然后打开或关闭右侧的Wi-Fi开关以启用或禁用Windows 11 计算机或设备上的Wi-Fi 。
设置(Settings)应用程序中的 Wi-Fi 开关
您还可以单击或点击Wi-Fi部分（不是直接在其右侧开关上），以查看与您的无线适配器相关的更多选项和设置。在此页面上，还有一个开关，您可以打开或关闭以启用或禁用Wi-Fi。
Wi -Fi设置列表中的Wi -Fi开关(Wi-Fi)
注意：(NOTE:)到目前为止，我们已经看到了简单的方法。在Windows 11中打开或关闭(Windows 11)Wi-Fi的一种稍微激进的方法是完全启用或禁用Wi-Fi适配器。当您禁用Wi-Fi卡时，这意味着Windows 11无法对其进行更多控制，并且在您重新启用它之前无法以任何方式使用它。此外，有几种不同的方法可以做到这一点，我们将在本教程的以下部分介绍我们所知道的方法：
3. 如何从设置中启用或禁用 Windows 11 上的 Wi-Fi 适配器
首先打开“设置”(Settings)应用程序 - 一种快速方法是按键盘上的Windows + I在设置(Settings)中，前往网络和互联网(Network & internet)。在窗口右侧，向下滚动直到找到高级网络设置(Advanced network settings)。然后，单击或点击它。
(Advanced)Windows 11中的(Windows 11)高级网络设置
在网络适配器(Network adapters)列表中，找到您的 Wi-Fi 卡，然后按其旁边的禁用(Disable)按钮以关闭Windows 11 PC 上的Wi-Fi 。
在Windows 11(Windows 11)中禁用 Wi-Fi 适配器
如果您的Wi-Fi已被禁用并且您想将其打开，请按启用(Enable)按钮。
在Windows 11(Windows 11)中启用 Wi-Fi 适配器
4. 如何从控制面板启用或禁用 Windows 11 上的 Wi-Fi 适配器(Control Panel)
控制面板(Control Panel )提供了类似但更冗长的方法。首先(Start)打开控制面板(opening the Control Panel)并导航到网络Network and Internet > Network and Sharing Center。然后，在窗口左侧，单击或点击更改适配器设置(Change adapter settings)。
(Change)在控制面板中(Control Panel)更改适配器设置
上一个操作会打开一个名为Network Connections的新窗口。在其中，找到您的Wi-Fi适配器并右键单击或按住它。然后，在上下文菜单中，选择禁用(Disable)以关闭您的 Wi-Fi，或选择启用(Enable)以将其打开。
从“网络连接(Network Connections)”窗口禁用 Wi-Fi 适配器
5. 如何从设备管理器启用或禁用 Windows 11 上的 Wi-Fi 适配器(Device Manager)
您还可以从设备管理器启用或禁用(Device Manager)Windows 11中的 Wi-Fi 。首先，打开设备管理器(Device Manager)（快捷方式是通过 WinX 菜单(via the WinX menu)），展开网络适配器(Network adapters)列表，并在其中找到您的 Wi-Fi 适配器。然后，右键单击或按住它，然后在上下文菜单中选择禁用设备(Disable device)或启用设备(Enable device)，具体取决于您是要打开还是关闭Wi-Fi。
从设备管理器(Device Manager)禁用Windows 11中的Wi-Fi
6. 如何在 Windows 11 上通过PowerShell、命令提示符(Command Prompt)或终端启用或禁用 Wi-Fi 适配器(Terminal)
如果您更喜欢在Windows 11(Windows 11)中使用命令行启用或禁用 Wi-Fi 适配器，请首先以管理员身份启动 PowerShell(launch PowerShell)、命令提示符(Command Prompt)或终端。(Terminal)在其中任何一个中，首先运行以下命令：netsh interface show interface。
获取网络适配器列表
这会显示安装在 Windows 11 计算机或设备上的网卡列表。检查它并查看您的 Wi-Fi 适配器的名称。例如，在下面的截图中，您可以看到我们的 Wi-Fi 适配器的Interface Name是Wi-Fi。
识别Wi-Fi网络适配器
接下来，如果要在 Windows 11 PC 上禁用Wi-Fi，请运行以下命令：netsh interface set interface [Wi-Fi adapter name] disable。确保将[Wi-Fi 适配器名称]([Wi-Fi adapter name])替换为无线网卡的接口名称(Interface name)。在我们的示例中，我们必须运行netsh interface set interface Wi-Fi disable。
在Windows 11中禁用Wi-Fi的命令(Wi-Fi)
要打开Wi-Fi，您可以运行相同的命令，但在其末尾使用enable更改(enable)disable ： netsh interface set interface [Wi-Fi adapter name] enable。
在Windows 11中启用Wi-Fi的命令(Wi-Fi)
这些命令以静默方式执行，因此您在运行它们时不会收到任何消息。但是，您可以在任何给定时刻使用第一个（netsh interface show interface）检查您的无线网卡的管理状态(Admin State)。
检查Wi-Fi适配器的状态
就是这样！
您知道在Windows 11中打开或关闭Wi-Fi的其他方法吗？
这些是我们所知道的在Windows 11(Windows 11) PC上启用或禁用 Wi-Fi 的所有方法。你认识其他人吗？如果您这样做了，或者您有任何其他内容要添加到我们的教程中，请随时在下面的评论部分告诉我们。
How do I enable or disable the Wi-Fi on Windows 11? -
There are many reasons why you might want to enable or disablе your Wi-Fi іn Windows 11. For exаmple, maybe уou don’t use Wi-Fi at all, or perhaps something happened to your wireless connection, and it ѕuddenly disconnected. Or perhaps you could not connect to Wi-Fi on your Windows 11 PC, and you have tо disable Wi-Fi and then enable it again. Regardless, if you need to еnable or disable Wi-Fi on Windows 11, here are six different methods to do it:
1. How to turn Wi-Fi on or off in Windows 11 from the taskbar
One of the easiest ways to disable or enable Wi-Fi on a Windows 11 PC is via its taskbar. On the right-hand side, in the so-called system tray, next to the volume icon, there’s a network icon that shows your internet connectivity in the present. The icon you see can illustrate:
- a wireless connection, which means that you are now connected to a Wi-Fi network
- a computer and a small Ethernet cable, meaning that you are connected to a wired network
- a globe with a disabled mark on it, which translates to no internet connectivity.
The system icons from the Windows 11 taskbar
Regardless of the icon you see on your Windows 11 taskbar, click or tap on it. Alternatively, you can also use the keyboard shortcut Windows + A. That opens a fly-out with several quick settings, as well as any notifications that you might have received on your PC. Among them, there should also be a Wi-Fi button, that looks like this:
The Wi-Fi button from Windows 11's quick actions fly-out
If it’s colored and a network name or an Available message is shown beneath it, then it means that your Wi-Fi is enabled, and you are either connected to a wireless network or at least one Wi-Fi is available nearby. To disable Wi-Fi on Windows 11, click or tap on the button’s left-hand side.
How to disable Wi-Fi in Windows 11
If the button doesn’t have your Windows 11 accent color, and the only thing written under it is Wi-Fi, then your wireless card is disabled. To enable Wi-Fi on Windows 11, click on the left-hand side of the Wi-Fi button.
How to enable Wi-Fi in Windows 11
Note that there’s also a slightly slower way of using this method to enable or disable Wi-Fi on Windows 11. Instead of pushing the left-hand Wi-Fi button, click or tap on the caret next to it.
Opening the list of available wireless networks
This opens the list of available wireless networks if your Wi-Fi is turned on or a fly-out that tells you that your Wi-Fi is off if that’s the case.
Either way, you also get a switch at the top-right corner of the fly-out, which you can use to enable or disable Wi-Fi on Windows 11.
The Wi-Fi switch from the list of wireless networks
TIP: After the Wi-Fi chip is enabled in Windows 11, here's how to connect to Wi-Fi.
2. How to enable or disable Wi-Fi on Windows 11 from Settings
Another easy way to enable or disable Wi-Fi is available via the Settings app. Open it, head to the Network & internet category, and turn on or off the Wi-Fi switch on the right to enable or disable Wi-Fi on your Windows 11 computer or device.
The Wi-Fi switch from the Settings app
You can also click or tap on the Wi-Fi section (not directly on its right-hand switch), to see more options and settings related to your wireless adapter. On this page, there’s also a switch that you can turn on or off to enable or disable your Wi-Fi.
The Wi-Fi switch from the list of Wi-Fi settings
NOTE: Up until now, we’ve seen the easy ways. A slightly more aggressive way of turning on or off Wi-Fi in Windows 11 is to enable or disable the Wi-Fi adapter altogether. When you disable your Wi-Fi card, it means that Windows 11 has no more control over it and can’t use it in any way until you enable it back. Furthermore, there are a few different ways to do that, and we present the ones we know of in the following sections of this tutorial:
3. How to enable or disable your Wi-Fi adapter on Windows 11 from Settings
Start by opening the Settings app - a quick way is to press Windows + I on your keyboard. In Settings, head to Network & internet. On the right side of the window, scroll down until you find the Advanced network settings. Then, click or tap on it.
Advanced network settings in Windows 11
In the list of Network adapters, find your Wi-Fi card and press the Disable button next to it to turn off Wi-Fi on your Windows 11 PC.
Disable the Wi-Fi adapter in Windows 11
If your Wi-Fi is already disabled and you want to turn it on, press the Enable button.
Enable the Wi-Fi adapter in Windows 11
4. How to enable or disable Wi-Fi adapter on Windows 11 from Control Panel
The Control Panel offers a similar, yet more lengthy approach. Start by opening the Control Panel and navigating to Network and Internet > Network and Sharing Center. Then, on the left side of the window, click or tap on Change adapter settings.
Change adapter settings in Control Panel
The previous action opens a new window called Network Connections. Inside it, locate your Wi-Fi adapter and right-click or press-and-hold on it. Then, in the contextual menu, select Disable to turn your Wi-Fi off or Enable to turn it on.
Disabling the Wi-Fi adapter from the Network Connections window
5. How to enable or disable Wi-Fi adapter on Windows 11 from Device Manager
You can also enable or disable Wi-Fi in Windows 11 from the Device Manager. First, open the Device Manager (a quick way is via the WinX menu), expand the list of Network adapters, and locate your Wi-Fi adapter in it. Then, right-click or press-and-hold on it, and select Disable device or Enable device in the contextual menu, depending on whether you want to turn your Wi-Fi on or off.
Disable Wi-Fi in Windows 11 from the Device Manager
6. How to enable or disable Wi-Fi adapter on Windows 11 from PowerShell, Command Prompt, or Terminal
If you prefer using command-line to enable or disable your Wi-Fi adapter in Windows 11, first launch PowerShell, Command Prompt, or the Terminal as administrator. In either of them, start by running the following command: netsh interface show interface.
Getting the list of network adapters
This shows you the list of network cards installed on your Windows 11 computer or device. Check it and see what name your Wi-Fi adapter has. For example, in the following screenshot, you can see that the Interface Name of our Wi-Fi adapter is Wi-Fi.
Identifying the Wi-Fi network adapter
Next, if you want to disable Wi-Fi on your Windows 11 PC, run this command: netsh interface set interface [Wi-Fi adapter name] disable. Make sure you replace [Wi-Fi adapter name] with the Interface name of your wireless card. In our example, we’d have to run netsh interface set interface Wi-Fi disable.
The command that disables Wi-Fi in Windows 11
To turn Wi-Fi on, you can run the same command, but change disable with enable at its end: netsh interface set interface [Wi-Fi adapter name] enable.
The command that enables Wi-Fi in Windows 11
These commands are executed silently, so you don’t get any message when you run them. However, you can use the first one (netsh interface show interface) to check the Admin State of your wireless card at any given moment.
Checking the state of the Wi-Fi adapter
That’s it!
Do you know other methods of turning Wi-Fi on or off in Windows 11?
These were all the methods we know for enabling or disabling Wi-Fi on a Windows 11 PC. Do you know others? If you do, or if you have anything else to add to our tutorial, don’t hesitate to let us know in the comments section below.
