麦克风^(Microphone)是最有用的输入设备之一，它允许用户参加在线会议、通过Skype 或 Zoom^{(Skype or Zoom)}与家人或朋友交谈，甚至可以通过语音识别进行口述。使用麦克风可以有多种用途，令人惊讶的是，它适用于简单的逻辑，即它将用户的语音作为输入，然后允许接收者通过扬声器或耳机听到该语音作为输出。

但是，有时用户插入他们的麦克风并且不知道如何配置它。这还不是全部；人们无法确定Windows 11/10上的麦克风是否正常工作。Windows 11/10上设置和测试麦克风。

^(Set)在Windows 11上^(Microphone)设置和测试^(Test)麦克风

在开始测试麦克风之前，正确设置它很重要。这是因为如果您错误地设置了麦克风，它将无法正常工作。有时，用户认为他们的麦克风出现故障，但在调查了问题的原因后，他们才知道问题是由于麦克风设置不正确造成的。这就是为什么首先我们将解释麦克风的设置过程，然后我们将继续介绍它的测试方法。

在 Windows 11 上设置新麦克风

首次连接麦克风时，您可能需要等待几秒钟，因为每当有新设备连接到它时，Windows 11都会搜索并安装最新的驱动程序。^{(Windows 11)}驱动程序安装过程完成后，您将在“设置”^(Settings)中看到您的麦克风，您可以在其中进行配置。

要在Windows 11^{(Windows 11)}上设置新麦克风，请按照以下步骤操作：

1. 右键单击 Windows 11开始^(Start)菜单并选择设置^(Settings)。
2. 从左侧窗格中选择系统。^(System)
3. 单击右侧窗格中的声音。^(Sound)
4. 在右侧，您将看到三个部分，输出^(Output)、输入^(Input)和高级^(Advanced)。在输入^(Input)部分中，通过单击展开选择用于讲话或录音的设备^{(Choose a device for speaking or recording)}选项卡。它将显示连接到系统的所有麦克风。
5. 通过单击相应的单选按钮从列表中选择您的麦克风。
6. 现在，单击所选麦克风旁边的箭头。
7. 在Input Settings中，您可以选择麦克风的格式^(Format)。如果您的麦克风太大声或太安静，您可以通过调整输入音量^{(Input volume)}滑块来解决此问题。

在 Windows 11 上测试麦克风

要测试您的麦克风，首先，将其连接到您的系统。现在，重复上面列出的前六个步骤。在此之后，您将在输入^(Input)部分看到测试您的麦克风^{(Test your microphone)}选项。

现在，单击“测试^(Test)麦克风”选项旁边的“开始测试^{(Start test)}”按钮，然后对着麦克风讲话。当您开始讲话时，您会在输入^(Input)音量滑块上看到输入脉冲。这个输入脉冲定义了输入声音的强度。如果您在滑块上看不到此输入脉冲，则您的麦克风工作不正常。

您可以通过单击停止测试^{(Stop test)}按钮随时停止测试。测试完成后，您将看到系统检测到的占总输入量百分比的结果。

^(Set)在Windows 10上^(Microphone)设置和测试^(Test)麦克风

我们将介绍如何在您的Windows 10^{(Windows 10)}系统上设置麦克风。设置好麦克风后，我们将学习如何对其进行测试。继续阅读：

设置新麦克风

首先，要设置麦克风，我们需要确保麦克风已插入或通过蓝牙^(Bluetooth)连接。请^(Please)确保您已安装麦克风所需的所有驱动程序。在大多数情况下，Windows会自动搜索驱动程序并将其安装在系统上。如果这不起作用，您可能必须检查制造商的网站以获取特定驱动程序并安装它们。

您可以按照以下步骤设置新麦克风：

1. 确保^(Make)您的麦克风已连接到您的系统。
2. 单击开始^(Start)并转到设置。^(Settings.)
3. 选择系统^(System)选项，然后从左侧面板上显示的选项中单击声音选项卡。^{(Sound )}
4. 在声音^(Sound)设置窗口中，转到输入^{(Input )}部分。
5. 在选择您的输入设备下，^{(Choose your input device,)}选择您要使用的麦克风或录音设备。

您的麦克风现已设置好并可以使用。

阅读^(Read)：如何在 Windows 中增加麦克风音量^{(How to Increase Microphone Volume in Windows)}。

在 Windows 10 上测试麦克风

要测试已安装在 Windows 10 PC 上的麦克风，您需要执行以下步骤：

首先，确保您的麦克风已连接到您的系统。

1. 单击开始^(Start)并转到设置。^(Settings.)
2. 现在，选择系统^(System)选项，然后从左侧面板上显示的选项中单击声音。^(Sound)
3. 在声音^(Sound)设置页面中，转到输入。^(Input.)
4. 在输入^(Input)选项下，您将看到测试您的麦克风^{(Test your microphone)}选项。
5. 在这里，寻找当您对着麦克风讲话时上升和下降的蓝色条。

如果您看到该条在移动，则可以确定您的麦克风工作正常。但是，如果没有，请选择疑难解答^{(Troubleshoot)}选项来修复您的麦克风。

此方法只会告诉您Windows是否正在检测您的麦克风，它不会告诉您您的实际声音。

阅读^(Read)： 如何为不同的应用程序设置首选扬声器和麦克风。

使用录音机^{(Voice Recorder)}测试你的麦克风

在Windows^(Windows)上进行测试的另一种快速方法是使用预安装的应用程序，即Voice Recorder。

Voice Recorder是一个内置的Windows应用程序，可用于录制讲座、对话和其他声音。早些时候，这个应用程序被称为录音机^{(Sound Recorder)}。要使用录音机，请使用以下步骤：

1]从开始菜单打开^{(Start Menu)}录音机^{(Voice Recorder)}。您可以使用确切的术语进行搜索并点击顶部结果。

 

2]一旦应用程序打开，点击是允许应用程序访问您的麦克风。^(Yes.)

3]现在点击出现在您面前的大录制按钮开始录制。^(Record)

4]点击停止^(Stop)图标完成录制。

5]您现在可以在应用程序的左侧窗格中查看所有录音。

6]单击^(Click)录音以使用所选麦克风聆听录音的声音。

这样，录音机^{(Voice Recorder)}允许您测试您的麦克风。您可以说话并立即收听您的录音。除了测试您的麦克风是否正常工作外，此应用程序还可以让您立即对录音进行质量检查。

如何在Windows 11上设置麦克风？

要在Windows 11^{(Windows 11)}上设置麦克风，首先将其连接到您的计算机。确保麦克风的电池没有耗尽。等到^(Wait)Windows 11安装麦克风的最新驱动程序。之后，启动Windows 11 设置^(Settings)应用并配置您的麦克风。我们已经在本文中解释了在上面的Windows 11^{(Windows 11)}中设置麦克风的整个过程。

如何让我的计算机识别新麦克风？

通常，Windows 操作系统^{(Windows OS)}会自动检测与其连接的设备。如果您的麦克风在将其连接到计算机后仍无法工作^{(microphone does not work)}，则可能是以下情况之一：

1. 您的麦克风的电池可能没电了。
2. 驱动程序可能已损坏。
3. 您的麦克风出现故障。

Windows 11/10计算机上运行麦克风测试。

我们希望这些技巧可以帮助您轻松快速地在Windows 11/10上测试麦克风。

How to Set up and Test a Microphone on Windows 11/10

The Microphone is one of the most useful input devices that allow the user to attend online meetings, talk to family or friends over Skype or Zoom, and even dictate with speech recognition. Using a microphone can have multiple purposes, surprisingly it works on a simple logic i.e. it takes the user’s voice as input and then allows the receiver to hear that voice as output through speakers or headphones.

However, sometimes users plug-in their microphones and do not understand how to configure it. That is not all; people fail to make out if the microphone On Windows 11/10 is even working. If you are struggling with similar issues, then read on to know how to set up and test the microphone on Windows 11/10.

Set up and Test a Microphone on Windows 11

Before you start testing your microphone, setting up it correctly is important. This is because if you set up your microphone incorrectly, it will not work. Sometimes, users think that their microphone has malfunctioned but after investigating the cause of the issue, they come to know that the issue was occurring due to the incorrect set up of the microphone. That’s why first, we will explain the set up process of a microphone, then we will proceed towards its testing method.

Setting up a new microphone on Windows 11

When you connect your microphone for the first time, you may have to wait for a few seconds because Windows 11 searches and installs the latest driver whenever a new device is connected to it. After the driver installation process is complete, you will see your microphone in Settings, where you can configure it.

To set up a new microphone on Windows 11, follow the steps below:

1. Right-click on the Windows 11 Start menu and select Settings.
2. Select System from the left pane.
3. Click Sound on the right pane.
4. On the right side, you will see three sections, Output, Input, and Advanced. In the Input section, expand the Choose a device for speaking or recording tab by clicking on it. It will show you all the microphones connected to your system.
5. Select your microphone from the list by clicking on the respective radio button.
6. Now, click on the arrow next to your selected microphone.
7. In the Input Settings, you can select the Format for your microphone. If your microphone is too loud or too quiet, you can fix this by adjusting the Input volume slider.

Testing a microphone on Windows 11

To test your microphone, first, connect it to your system. Now, repeat the first six steps listed above. After this, you will see the Test your microphone option in the Input section.

Now, click on the Start test button next to the Test your microphone option and speak into the microphone. When you start speaking, you will see the input pulse on the Input volume slider. This input pulse defines the intensity of the input sound. If you do not see this input pulse on the slider, your microphone is not working well.

You can stop testing anytime by clicking on the Stop test button. After the completion of the test, you will see the result in the percentage of the total input volume detected by your system.

Set up and Test a Microphone on Windows 10

We shall touch on how to set up the microphone on your Windows 10 system. Once the microphone is set up, we will learn how to test the same. Keep reading:

Setting up a new microphone

Firstly, to set up the microphone we need to ensure that the microphone is plugged in or connected via Bluetooth. Please ensure that you have all the necessary drivers for your microphone installed. In most cases, Windows automatically searches for the drivers and installs them on the system. If this doesn’t work, you may have to check the manufacturer’s website for the specific drivers and have them installed.

You can set-up a new microphone, following these steps:

1. Make sure your microphone is connected to your system.
2. Click on Start and go the Settings.
3. Select System option, and click the Sound tab from the options appearing on the left-side panel.
4. In the Sound settings windows, go to the Input section.
5. Under Choose your input device, select the microphone or recording device you intend to use.

Your microphone is now set up and ready for use.

Read: How to Increase Microphone Volume in Windows.

Testing the microphone on Windows 10

To test the microphone that has already been installed on your Windows 10 PC, you will need to perform the following steps:

First, make sure your microphone is connected to your system.

1. Click on Start and go the Settings.
2. Now, select System option, and click Sound from the options appearing on the left-side panel.
3. In the Sound settings page, go to Input.
4. Under the Input options, you will see the Test your microphone option.
5. Here, look for the blue color bar that rises and falls as you speak into your microphone.

If you see the bar moving, you can be sure that your microphone is working properly. However, if it doesn’t, select the Troubleshoot option to fix your microphone.

This method will only tell you if Windows is detecting your microphone, it doesn’t tell you how you actually sound.

Read: How to set up Preferred Speaker & Microphone for different Apps.

Using Voice Recorder to test your microphone

Another quick way of testing on Windows is with the pre-installed app i.e. Voice Recorder.

Voice Recorder is an in-built Windows application that can be used for recording lectures, conversations, and other sounds. Earlier this application was called Sound Recorder. To use the voice recorder, use these steps:

1] Open the Voice Recorder from the Start Menu. You can search with the exact term and hit the top result.

 

2] Once the application opens, allow the app to access your microphone by hitting Yes.

3] Now hit the big Record button appearing in front of you to start recording.

4] Hit the Stop icon to finish recording.

5] You can now view all your recordings on the left pane of the application.

6] Click on the recording to hear how your recording sounded using the selected microphone.

This way, Voice Recorder allows you to test your microphone. You can speak and instantly listen to your recording. Along with testing if your microphone is working, this application also lets you perform immediate quality checks for the recordings.

How do I set up a microphone on Windows 11?

To set up a microphone on Windows 11, first, connect it to your computer. Make sure that the batteries of your microphone are not dead. Wait till Windows 11 installs the latest driver of your microphone. After that, launch the Windows 11 Settings app and configure your microphone. We have explained the entire process to set up a microphone in Windows 11 above in this article.

How do I get my computer to recognize a new microphone?

Usually, Windows OS automatically detects the devices connected to it. If your microphone does not work after you connect it to your computer, one of the following conditions may be true:

1. Your microphone’s battery may be dead.
2. The driver may be corrupted.
3. Your microphone has malfunctioned.

You can run a test for your microphone on a Windows 11/10 computer.

We hope these tips helped you easily and quickly test the microphone on Windows 11/10.

Related posts

• Wizard无法在Windows 10中启动麦克风

• Firefox browser中Block Notifications，Microphone，Camera要求

• Microphone不在Windows 10上的Microsoft Teams工作

• 您的浏览器可防止访问麦克风 - Zoom error

• 如何从自动调节停止麦克风; Lock microphone量

• 如何在 Windows 10 中提高麦克风音量

• Windows 10中的Increase Microphone Volume

• 如何在 Windows 10 上修复麦克风太安静

• 如何使用键盘快捷键关闭 Windows 11 相机和麦克风

• 如何在Windows 11/10提升或增加Microphone Volume

• Zoom Microphone不工作的Windows 10

• 修复 Microsoft Teams 麦克风无法在 Windows 10 上运行的问题

• Internal Microphone丢失或在Windows 10未示出

• Zoom 麦克风无法在 Windows 或 Mac 上工作？这里有 8 个尝试修复

• Apple AirPods 麦克风无法正常工作？修复的 10 大方法

• 如何修复麦克风无法在 Mac 上工作

• 如何修复在 Windows 10 上无法正常工作的麦克风

• 如何在Windows 10中将Microphone静音

• Fix Microphone在Windows 11/10不插电

• 麦克风提示：如何减少背景噪音并获得更好的声音