在Windows 11/10Microsoft Defender启用对存档（.zip、.rar和.cab）文件的扫描，以获得更好和增强的安全性和保护。在今天的帖子中，我们将向您展示如何配置Windows Defender以扫描Windows 11/10中的存档文件。

Windows Defender是^(Defender)Windows 11/10中的内置安全解决方案，默认启用以保护您的 PC 免受病毒、恶意软件、间谍软件和 PUP的侵害。

^{(Windows Defender)}当计划扫描或用户手动启动扫描过程时，Windows Defender将扫描.zip .rar .cab文件的内容。^{(.zip .rar .cab)}

使 Windows Defender^{(Make Windows Defender)}扫描.zip .rar .cab文件

您可以通过三种方式启用或禁用通过Windows Defender扫描存档文件的选项：

1. 通过组策略编辑器，
2. 注册表编辑器
3. 电源外壳。

让我们详细看看过程

1]配置 Windows Defender^{(Configure Windows Defender)}以通过组策略编辑器扫描存档文件^{(Group Policy Editor)}

启动本地组策略编辑器。在窗口的左窗格中，导航到此位置：

Computer Configuration > Administrative Templates > Windows Components > Windows Defender Antivirus > Scan

在本地组策略编辑器中^{(Local Group Policy Editor)}扫描^(Scan)的右窗格中，双击扫描存档文件^{(Scan archive files)}策略以编辑其属性。

• 单击已启用^(Enabled)的单选按钮以允许存档文件扫描
• 或者单击已禁用^(Disabled)或未配置^{(Not Configured)}的单选按钮以禁止存档文件扫描。这是默认设置。

This policy setting allows you to configure scans for malicious software and unwanted software in archive files such as .ZIP or .CAB files. If you enable or do not configure this setting, archive files will be scanned. If you disable this setting, archive files will not be scanned.

单击应用^(Apply)>确定^(OK)。

您现在可以退出组策略编辑器^{(Group Policy Editor)}窗口。

2]配置Windows Defender^{(Configure Windows Defender)}通过注册表编辑器扫描存档文件^{(Registry Editor)}

启动注册表编辑器。并导航到以下注册表^(Registry)项：

HKEY_LOCAL_MACHINE > SOFTWARE > Policies > Microsoft > Windows Defender > Scan

如果Scan键不存在，请通过右键单击Windows Defender创建它，单击New > Key。

现在，右键单击新创建的Scan键，单击New > DWORD (32-bit) Value创建一个名为DisableArchiveScanning的条目。

现在，在右窗格中，双击新创建的条目DisableArchiveScanning以编辑它的属性。

在数值数据^{(Value data)}字段中，将其设置为0以启用存档文件的扫描。否则，将其设置为1以禁用归档文件的扫描。

单击确定^(OK)。

退出注册表编辑器。

重启电脑。

3]配置 Windows Defender^{(Configure Windows Defender)}以通过PowerShell扫描存档文件^(PowerShell)

以提升模式启动 PowerShell^{(Launch PowerShell in elevated mode)}。

^(Enter)在PowerShell中^(PowerShell)输入您要使用的以下命令，然后按 Enter 键^(Enter)。

启用：

Set-MpPreference -DisableArchiveScanning 0

要禁用：

Set-MpPreference -DisableArchiveScanning 1

您可以退出PowerShell环境。

That’s it, folks!

Configure Microsoft Defender to scan .zip .rar .cab files in Windows 11/10

On Windows 11/10, you can enable scanning of archive (.zip, .rar, and .cab) files with Microsoft Defender for better and enhanced security and protection. In today’s post, we will show you how to configure Windows Defender to scan archive files in Windows 11/10.

Windows Defender is the built-in security solution in Windows 11/10 and is enabled by default to protect your PC from viruses, malware, spyware, and PUPs.

Windows Defender will scan the contents of .zip .rar .cab files when a scan is scheduled or when the user starts the scanning process manually.

Make Windows Defender scan .zip .rar .cab files

You can enable or disable the option to scan archive files by Windows Defender in three ways:

1. Via Group Policy Editor,
2. Registry Editor
3. PowerShell.

Let us see the procedure in details

1] Configure Windows Defender to scan archive files via Group Policy Editor

Launch Local Group Policy Editor. On the left pane of the window, navigate to this location:

Computer Configuration > Administrative Templates > Windows Components > Windows Defender Antivirus > Scan

In the right pane of Scan in Local Group Policy Editor, double-click Scan archive files policy to edit its properties.

• Click the radio button for Enabled to allow archive files scan
• Or click the radio button for Disabled or Not Configured to disallow archive files scan. This is the default setting.

This policy setting allows you to configure scans for malicious software and unwanted software in archive files such as .ZIP or .CAB files. If you enable or do not configure this setting, archive files will be scanned. If you disable this setting, archive files will not be scanned.

Click Apply > OK.

You can now exit the Group Policy Editor window.

2] Configure Windows Defender to scan archive files via Registry Editor

Launch Registry Editor. and navigate to the following Registry key:

HKEY_LOCAL_MACHINE > SOFTWARE > Policies > Microsoft > Windows Defender > Scan

If the Scan key is not present, create it by right-clicking Windows Defender, click New > Key.

Now, right-click the newly created Scan key, click New > DWORD (32-bit) Value to create an entry named DisableArchiveScanning.

Now, on the right pane, double-click the newly created entry DisableArchiveScanning to edit it’s properties.

In the Value data field, set it 0 to enable the scanning of archive files. Otherwise, set it to 1 to disable the scanning of archive files.

Click OK.

Exit Registry Editor.

Restart PC.

3] Configure Windows Defender to scan archive files via PowerShell

Launch PowerShell in elevated mode.

Enter the command below you want to use into PowerShell, and hit Enter.

To Enable:

Set-MpPreference -DisableArchiveScanning 0

To Disable:

Set-MpPreference -DisableArchiveScanning 1

You can exit the PowerShell environment.

That’s it, folks!

Related posts

• 在Windows 10启用潜在的Unwanted Applications protection

• 如何从Windows Defender scan在Windows 10排除的文件夹

• 在Windows 10上Windows Defender无法打开

• 如何打开Windows Security Center在Windows 10

• boot time在Windows 11/10中的Perform Windows Defender Offline Scan

• Microsoft Store缺少或未安装在Windows 10中

• Windows Defender在Windows 10中没有自动更新

• 什么是Windows 10中的Account Protection以及如何隐藏此部分

• 如何启用Windows Defender Periodic Scanning在Windows 10

• Windows 11/10 Slow download Microsoft Store的速度

• 在Windows 10启用或禁用Core Isolation and Memory Integrity

• Windows 10中的Fix Microsoft Edge High Memory Usage

• Microsoft Edge在Windows 10 Restart上保持Auto-resetting

• 什么是Windows 10中的WDAGUtilityAccount？我应该删除它吗？

• 如何打开Windows 10的Microsoft Teams多个实例

• Extract RAR在Windows 10上使用这些免费Microsoft Store apps

• Stop Microsoft Edge在Windows 10中运行在背景中

• 如何显示或隐藏Microsoft Print给PDF printer在Windows 10

• 如何在Windows 10重新安装Microsoft Store Apps

• 如何添加Windows 10 Store Game应用程序到Steam