尽管Windows Update旨在解决错误并为您的计算机提供新的安全更新,但仍有用户抱怨它出现了故障,而原本可以正常工作的东西。其中一个投诉是关于互联网(Internet)的,许多用户都经历过在Windows 11/10更新后互联网(Internet)停止工作。因此,在本文中,我们为您提供了一些简单的解决方案来解决此问题。
(Internet)在 Windows 11/10 上更新后互联网无法正常工作
在 Windows 11/10 更新后,您可以采取以下措施来修复Internet无法正常工作:(Internet)
- 重新启动您的设备
- 检查您的设置
- 检查路由器是否可以访问
- 忘记并重新连接
- 使用网络故障排除
- 重置网络堆栈
- 卸载有问题的更新
- 使用硬件(Use Hardware)和设备(Devices)疑难解答
- 使用网络重置。
让我们详细谈谈它们。
Windows 更新(Windows Update)后无法访问Internet
1]重新启动您的设备
这是非常基本的,但可以通过重新启动计算机来修复Windows 11/10中最常见的错误。因此,如果您的Internet在更新后停止工作,请尝试重新启动计算机并检查问题是否已解决。
您应该做的另一件事是重新启动路由器(Router)。只需(Just)拔下它,等待一两分钟,重新插入并检查它是否解决了问题。
2]检查您的设置
更新可能会关闭您计算机上的某些网络设备。因此,我们需要检查您的设置。
启用 Wi-Fi
要检查您的Wi-Fi是否已启用,请从“开始”菜单启动“设置” ,然后单击(Settings)Network & Internet > Wi-Fi。现在,使用切换开关启用Wi-Fi。
注意:如果您的 WiFi 已启用并已连接,请尝试断开连接然后连接到网络。(Note: If your WiFi is enabled and connected try disconnecting and then connecting to the Network.)
启用网络适配器
更新后可能面临的最常见错误是禁用的网络适配器(Network Adapter)。所以,让我们检查一下你的情况。从开始菜单启动设置,然后单击(Settings)Network & Internet > Status > Change adapter options。右键单击您的网络适配器并选择启用(Enable)(如果已禁用)。
如果这些设置没问题,请检查以后的解决方案。
阅读(Read):网络图标显示无法访问互联网,但我已连接(Network icon says No internet access, but I am connected)。
3]检查(Check)路由器(Router)是否可访问
在继续之前,我们需要确认问题不是因为您的ISP,而是因为您的计算机(Computer)。
首先,检查您的Default Gateway。为此,请以管理员身份启动命令提示符,键入以下命令并按(Command Prompt)Enter。
ipconfig
在“无线 LAN 适配器 Wi-Fi”(或以太网(Ethernet)部分,如果您使用它)下查找默认网关。(Default Gateway)一旦你知道你的路由器(Router)的默认网关(Default Gateway),ping你的路由器。为此,在命令提示符(Command Prompt)中键入以下命令并按Enter。
ping <Router’s Default Gateway>
检查你得到的结果。如果接收到所有 4 个发送的数据包,则您的系统(System)和路由器(Router)之间的连接正常。您可能需要联系您的ISP以检查您的路由器(Router)和ISP之间的连接是否正常。
阅读(Read):升级到或安装新的 Windows 10 功能更新后无法访问 Internet。
4]忘记并重新连接
如果您无法连接到某个特定网络,请尝试忘记然后重新连接。这很有用,因为它会清除存储的凭据、IP 地址和其他网络和安全设置。
为此,请从“开始”菜单启动“设置” ,然后单击(Settings)Network & Internet > Wi-Fi。现在,单击Manage known networks,选择您的网络,然后单击Forget。
现在,单击任务栏中的网络图标并(Taskbar)重新连接到Wi-Fi。最后(Finally),检查它是否解决了您的问题。
5]使用网络故障排除
要在Windows 11中使用(Windows 11)网络故障排除(Network Troubleshooting),请执行以下操作:
- Press Win+I打开Windows 设置(Windows Settings)。
- 确保(Make)您位于“系统(System)”选项卡中。
- 单击(Click)右侧的疑难解答菜单。(Troubleshoot)
- 单击(Click)其他疑难解答选项。
- 找出Internet 连接(Internet Connections)疑难解答。
- 单击运行按钮。
- 按照屏幕说明进行操作。
但是,如果您使用的是Windows 10,请按照以下步骤操作:
您可以使用 Windows 内置的网络疑难解答来解决此问题。
为此,设置(Settings)并单击Update & Security > Troubleshooter > Additional troubleshooters > Internet Connection > Run the troubleshooter。
让它运行并检查它是否可以解决您的问题。
6]重置网络堆栈
如果网络故障排除(Network Troubleshooting)没有解决问题,您应该尝试重置网络信息。为此,请以管理员身份启动命令提示符并键入以下命令。( Command Prompt)
使用以下命令重置网络请求处理组件(reset the network request handling component)。
netsh winsock reset
使用以下命令重置 IP 堆栈
netsh int ip reset
使用以下命令释放网络配置
ipconfig /release
使用以下命令更新网络配置
ipconfig /renew
使用以下命令刷新 DNS 缓存(flush the DNS cache)
ipconfig /flushdns
现在,重新启动您的计算机并检查它是否为您解决了Internet无法正常工作的问题。
7]卸载更新
如果上述解决方案都不适合您,请尝试卸载最近的更新(uninstalling recent updates)。这不言自明,因为问题是由更新引起的,删除它可以解决问题。
卸载质量更新
要卸载质量更新(Quality Updates),请执行以下步骤:
- 通过Win + X > Settings启动设置> 设置(Settings)
- 单击Update & Security > View update history > Uninstall updates。
- 选择您的最后一次更新,然后单击卸载(Uninstall)。
卸载更新后,尝试重新启动计算机并检查问题是否已解决。
卸载功能更新
如果您没有收到质量(Quality)更新而是功能(Feature)更新,那么您必须回滚到以前版本的Windows 10才能解决问题。确保(Make)在继续之前对您的用户文件进行完整备份。
按照给定的步骤卸载Windows 10中的功能更新(Feature Updates)
Win Win + I启动设置(Settings)
从“返回到以前版本的Windows 10 ”部分单击Update & Security > Recovery > Get Started
之后(Afterward),按照屏幕上的说明卸载功能(Feature)更新。现在,检查问题是否仍然存在。
8]使用硬件(Use Hardware)和设备(Devices)疑难解答
运行硬件和设备疑难解答。
9]使用网络重置
使用网络重置功能,看看它是否适合您。
希望这些解决方案可以帮助您修复在Windows 11/10上更新后无法正常工作的Internet。
为什么我的互联网无法在Windows 11/10上运行?
Windows 11/10上运行可能有多种原因。您需要通过检查驱动程序来开始故障排除。之后,您还应该检查您是否有有效的互联网连接。然后,您可以使用各种疑难解答程序来解决此问题。
Windows 11/10更新后无法连接到Wi-Fi ?
如果您有旧的 Wi-Fi 适配器,更新到Windows 11或 Windows 10 后可能会遇到此类问题。在这种情况下,您需要确认您的适配器是否与当前操作系统兼容。为此,您可以联系制造商或查看官方网站以获取可能的更新。
这些帖子提供了额外的故障排除建议:(These posts offer additional troubleshooting suggestions:)
- 安装累积更新后无法上网
- 安装功能更新后无法访问 Internet
- Windows 无法连接到 Internet
- 以太网连接不工作
- 没有互联网,安全的 Windows WiFi 错误(No internet, secured Windows WiFi error)。
Internet not working after an Update on Windows 11/10
Even though Windows Update is meant to solve bugs and gіve nеw security υpdates to your computer, there hаve been complaints from users that it has malfunctioned ѕomething that was working fіne otherwise. One such complaіnt is regardіng Internet, many users haνe experienced thаt the Internet stops wоrking after an update on Windows 11/10. Therefore, in this article, we preѕent you with some simple solutions to fіx the іssue.
Internet not working after an Update on Windows 11/10
These are the things you can do to fix the Internet not working after an update on Windows 11/10:
- Restart your Device
- Check your Settings
- Check if the Router is accessible
- Forget and Reconnect
- Use Network Troubleshooting
- Reset network stack
- Uninstall the problematic Update
- Use Hardware and Devices troubleshooter
- Use Network Reset.
Let us talk about them in detail.
No Internet access after Windows Update
1] Restart your Device
This is pretty basic but the most common errors in Windows 11/10 can be fixed by restarting the computer. So, if your Internet has stopped working after an update, try restarting your computer and check if the issue is fixed.
Another thing you should do is restart your Router. Just unplug it, wait for a minute or two, re-plug and check if it fixes the issue.
2] Check your Settings
An update can turn off some network devices on your computer. Therefore, we need to check your Settings.
Enable Wi-Fi
To check if your Wi-Fi is enabled, launch Settings from the Start Menu and click Network & Internet > Wi-Fi. Now, use the toggle to enable Wi-Fi.
Note: If your WiFi is enabled and connected try disconnecting and then connecting to the Network.
Enable Network Adapter
Probably the most common error one can face after an update is the disabled Network Adapter. So, let’s check if that’s your case. Launch Settings from the Start Menu and click Network & Internet > Status > Change adapter options. Right-click on your network adapter and select Enable (if it’s disabled).
If these settings are fine, check later solutions.
Read: Network icon says No internet access, but I am connected.
3] Check if the Router is accessible
We need to confirm that the problem is not because of your ISP but your Computer before moving forward.
First, check your Default Gateway. To do that, launch Command Prompt as an administrator, type the following command and hit Enter.
ipconfig
Look for Default Gateway under “Wireless LAN adapter Wi-Fi” ( or Ethernet section if you use that). Once you know your Router’s Default Gateway, ping your Router. For that, type the following command in the Command Prompt and hit Enter.
ping <Router’s Default Gateway>
Examine the result you got. If all 4 sent packets are received, the connection between your System and Router is fine. You may have to contact your ISP to check if the connection between your Router and ISP is working.
Read: No Internet Access after upgrading to or installing new Windows 10 Feature Update.
4] Forget and Reconnect
If there is a particular network that you can’t connect to, try forgetting and then reconnecting to it. This is useful as it flushes out the stored credentials, IP address, and other network & security settings.
To do that, launch Settings from the Start Menu and click Network & Internet > Wi-Fi. Now, click Manage known networks, select your Network, and click Forget.
Now, click on the network icon from the Taskbar and reconnect to the Wi-Fi. Finally, check if it fixes your issue.
5] Use Network Troubleshooting
To use the Network Troubleshooting in Windows 11, do the following:
- Press Win+I to open Windows Settings.
- Make sure that you are in the System tab.
- Click on the Troubleshoot menu on the right side.
- Click the Other troubleshooters option.
- Find out the Internet Connections troubleshooter.
- Click on the Run button.
- Follow the screen instructions.
However, if you are using Windows 10, follow these steps:
You can use Windows built-in Network Troubleshooter to fix the issue.
To do that, Settings and click Update & Security > Troubleshooter > Additional troubleshooters > Internet Connection > Run the troubleshooter.
Let it run and check if it can fix your issue.
6] Reset network stack
You should try to reset network information if Network Troubleshooting didn’t fix the issue. To do that, launch Command Prompt as an administrator and type the following commands.
Use the following command to reset the network request handling component.
netsh winsock reset
Use the following command to reset IP Stack
netsh int ip reset
Use the following command to release network configuration
ipconfig /release
Use the following command to renew network configuration
ipconfig /renew
Use the following command to flush the DNS cache
ipconfig /flushdns
Now, restart your computer and check if it fixes the Internet not working issue for you.
7] Uninstall Updates
If none of the mentioned solutions worked for you, try uninstalling recent updates. This self-explanatory, since, the problem was caused by an update, removing it will fix the issue.
Uninstall Quality Updates
To uninstall Quality Updates follow the following steps:
- Launch Settings by Win + X > Settings
- Click Update & Security > View update history > Uninstall updates.
- Select your last update and click Uninstall.
After uninstalling the update, try restarting your computer and check if the issue is solved.
Uninstall Feature Updates
If you haven’t received a Quality update but a Feature update then you have to roll back to the previous version of Windows 10 to fix the issue. Make sure to make a full backup of your user files before proceeding.
Follow the given steps to uninstall Feature Updates in Windows 10
Launch Settings by Win + I
Click Update & Security > Recovery > Get Started from the “Go back to the previous version of Windows 10” section.
Afterward, follow the on-screen instructions to uninstall the Feature updates. Now, check if the issue persists.
8] Use Hardware and Devices troubleshooter
Run the Hardware and Devices troubleshooter.
9] Use Network Reset
Use the Network Reset feature and see if that works for you.
Hopefully, these solutions have helped you to fix the Internet not working after an update on Windows 11/10.
Why is my internet not working on Windows 11/10?
There could be several reasons why your internet is not working on Windows 11/10. You need to start the troubleshooting by checking the driver. Following that, you should also check if you have a valid internet connection or not. Then, you can use various troubleshooters to get rid of this problem.
Can’t connect to Wi-Fi after Windows 11/10 update?
If you have an old Wi-Fi adapter, you could encounter such problems after updating to Windows 11 or Windows 10. In that case, you need to confirm if your adapter is compatible with the current operating system. For that, you can contact the manufacturer or check the official website for possible updates.
These posts offer additional troubleshooting suggestions:
- Cannot access to Internet after installing Cumulative Update
- No Internet Access after installing Feature Update
- Windows cannot connect to the Internet
- Ethernet connection not working
- No internet, secured Windows WiFi error.