解决Windows 11/10 PC 中大多数问题的最简单方法是重新启动 PC(RESTART THE PC)!这也是您寻求技术帮助的任何人提出的第一个问题。您是否尝试过重新启动PC一次?你有没有想过为什么重启 Windows 11/10 电脑可以解决很多问题,即使是内置的疑难解答或专家也无法在短时间内解决?在这篇文章中,我们将讨论一些关于为什么重启 PC 可以解决大部分问题的事实。
为什么重新启动计算机可以解决大多数问题?
任何操作系统在启动或重新启动时都能完成非凡的工作。虽然现在电脑启动只需要 5-10 秒,但在这短短的时间内,发生了很多事情。所以这不仅仅是关于Windows的。macOS、Linux也是如此。智能手机(Smartphones)、智能(Smart)交换机,甚至路由器,但让我们在这里谈谈Windows!那么计算机重启有什么帮助呢?
- 清除 RAM
- 重新启动崩溃或过载的进程
- 内存泄漏
- 硬件(Hardware)停止,因为它不知道该做什么
- 图形问题
最后,重新启动计算机会清除计算机的当前状态以及导致问题的软件。重新启动甚至可以帮助解决Internet或网络(Network)问题 当它重新启动时,一切都重新开始,一切看起来都很好。但是,请注意,如果这是一个经常发生的问题,您可能不得不寻找永久的解决方案。
1]清除RAM
很多东西都存储在物理RAM和硬盘上的分页内存中。很多足迹和后台进程一直在运行,当它变满时,系统变慢,最终耗尽燃料。有时我们打开了很多东西,以至于即使是常规功能也没有多少。即使您设法关闭了一些应用程序。有可能事情仍在后台运行,可能会不断累积并导致内存泄漏(memory leak)。重新启动会清除RAM,让您呼吸新鲜空气。
阅读(Read):Windows 10 如何启动?
2]重新启动(Restarts)崩溃或过载的进程
有时一个进程可能会崩溃或最终使用过多的资源,这可能会导致程序或驱动程序崩溃或冻结。虽然重新启动程序可能会有所帮助,但在大多数情况下重新启动 PC 是最简单的选择。
3]内存泄漏
编码不佳的程序可能会导致内存泄漏(Memory leaks),使程序或您的系统受到影响。重新启动使您的 PC 以全新的状态开始。
2]硬件已经停止,因为它不知道下一步该做什么
这是您获得BSOD的典型Windows问题。当Windows在遇到问题时不知道下一步该去哪里时,它就会停下来。它可以重新启动或重新加载驱动程序,因为低级别的硬件卡住了。当系统重新启动时,它会从头开始加载所有内容。它还会清除内存中的任何旧数据,就好像什么都没发生一样。系统将创建诊断日志并将其发送到Microsoft服务器进行检查。
3] 图形会对系统造成影响
假设您正在运行对(Suppose)GPU造成很大压力的高端游戏和工具。类似于RAM发生的情况,但更多的是会减慢系统速度的发热问题。如果您试图突破极限,最终将导致BSOD。
在我的一台 PC 上,我有一个旧的GPU,并且流式传输视频会导致事情冻结。唯一的选择是接近流媒体,然后重新启动。我有时不得不停止流式传输一段时间,这样它可能会冷却下来。
Windows 11/10 在处理情况方面变得更好,并且比以前更少的频繁崩溃。有时重新启动服务(Service)或进程可以解决问题,但为此,必须知道它是哪个服务或进程。这就是许多人仍然喜欢重新启动而不是解决问题的原因。
阅读:(Read:) 软重启 vs 硬重启 vs 重启 vs 重置解释(Soft Reboot vs Hard Reboot vs Restart vs Reset explained)。
如果重启不能解决问题
如果您的 PC 出现一定程度的损坏,只能通过替换系统文件来修复,那么简单的重启将无济于事。在大多数情况下,使用这 5 个通用修复程序之一肯定可以解决您的Windows问题。
我希望这篇文章能够帮助你理解为什么重启可以解决很多问题。我相信有很多,如果你知道这样一个原因,请在评论中告诉我们。
Why does restarting your computer fix most problems?
The easiest way to fix most of thе problems in Windows 11/10 PC is to RESTART THE PC! It is also the first question asked by any person from who you seek technical help. Have you tried restarting the PC once? Have you ever wondered why restarting a Windows 11/10 computer can fix a lot of problems that not even the built-in troubleshooters or an expert can fix in that short period? In this post, we will talk about some of the facts about why restarting PC fixes most of the problems.
Why does restarting the computer fix most problems?
Any Operating System does a phenomenal job when it starts or reboots. While these days it only takes 5-10 seconds for a computer to boot, but in that short time, a lot of things happen. So it is not just about Windows. It’s the same with macOS, Linux. Smartphones, Smart switches, and even routers, but let’s talk about Windows here! So how does a computer restart help?
- Clears RAM
- Restarts crashed or overloaded processes
- Memory leaks
- Hardware stops because it doesn’t know what to do
- Graphics issue
In the end, restarting the computer clears the current state of the computer, and software which were causing the problem. Restarting can even help solve the Internet or Network problems When it restarts, everything starts fresh, and things look just fine. However, be aware that if it’s a problem that happens often, you may have t0o look for a permanent solution.
1] Clears RAM
A lot of things are stored on the physical RAM and the paged memory on the hard disk. A lot of footprints and background process keeps running, and as it gets full, the system gets slow, ultimately running out of fuel. Sometimes we have opened so many things that not much is left to even a regular function. Even if you managed to close some applications. Chances are things are still running in the background that can keep accumulating and result in a memory leak. Restarting clears RAM and gives you fresh air to breathe.
Read: How does Windows 10 boot?
2] Restarts crashed or overloaded processes
Sometimes a process may crash or end up using excessive resources and this can cause the program or driver to crash or freeze. While restarting the program may help, restarting the PC in most cases works out to be the easiest option.
3] Memory leaks
Poorly coded programs can cause Memory leaks, making programs or your system suffer. Restarting makes your PC starts with a clean slate.
2] The hardware has stopped because it doesn’t know what to do next
That’s a typical Windows issue where you get BSOD. When Windows doesn’t know where to go next when it gets into a problem, it just stops. It can restart or reload the driver because the hardware at a low level is stuck. When the system reboots, it loads up everything from scratch. It also clears of any old data in memory as if nothing happened. The system will create a log for diagnosis and send it to Microsoft servers for checks.
3] Graphics can take a toll on the system
Suppose you are running high-end games and tools which put a lot of pressure on GPU. Something similar to what happens with RAM, but more of a heating issue that slows down the system. If you are trying to push the limit, it will ultimately result in BSOD.
On one of my PCs, I have an old GPU, and streaming a video causes things to freeze. The only option is close to the streaming, and restart. I sometimes have to stop streaming for a while so it may cool off.
Windows 11/10 has gotten better at handling situations, and there are fewer frequent crashes than before. Sometimes restarting a Service or process can resolve the problem, but for that, one has to know which service or process it is. That is the reason many still prefer to restart than troubleshoot the problem.
Read: Soft Reboot vs Hard Reboot vs Restart vs Reset explained.
If a restart does not solve the problem
If your PC gets a level of corruption that can only be fixed by replacing the system files, a simple restart will never help. In most cases using one of these 5 universal fixes is sure to fix your Windows problems.
I hope the post was able to help you understand why restart can fix a lot of problems. I am sure there are many, and if you know one such reason, do let us know in the comments.