如果您使用Google Chrome并收到错误消息您的连接不是私密的，攻击者可能正试图从 domain_name.com 窃取您的信息，NET::ERR_CERT_WEAK_SIGNATURE_ALGORITHM^{(Your connection is not private, Attackers might be trying to steal your information from domain_name.com, NET::ERR_CERT_WEAK_SIGNATURE_ALGORITHM)}这里有一些您可能想要检查的潜在解决方案。此特定问题主要发生在HTTPS站点或使用SSL证书的站点上。

NET::ERR_CERT_WEAK_SIGNATURE_ALGORITHM

出现此问题的原因可能与阻止用户在任何浏览器中打开 HTTPS 站点的^{(that prevents users from opening HTTPS sites in any browser)}原因相同。所以解决方案也是一样的。

在开始之前，如果您最近安装了任何反恶意软件或防火墙软件^{(anti-malware or firewall software)}并开始遇到此问题，请尝试暂时禁用它们并检查您是否可以打开该网站。

现在，如果您在计算机上遇到此问题，您可以尝试^{(try opening the same website)}在您的手机或另一台计算机^{(another computer)}上打开相同的网站。将辅助设备连接到相同的互联网连接并尝试打开相同的网站。如果站点在辅助设备上打开，则问题存在于您的主计算机上。如果该站点未在辅助设备上打开，请将其连接到不同的 Internet 连接^{(different internet connection)}并尝试打开同一站点。如果它现在正在打开，则表明您的网络中存在问题。对于第一个问题，您需要遵循 2

如果问题出在您的计算机上，则需要遵循第 1 条和第 3 条建议，但如果问题出在您的网络连接上，请遵循第 4 条建议并重置您的网络配置。

1]清除SSL状态^{(1] Clear SSL State)}

基本解决方案是删除SSL缓存。为此，您需要打开“Internet 选项”。为此，请按Win+R，键入inetcpl.cpl并按Enter按钮。之后，切换到“内容^(Content)”选项卡。在Certificates下，您会发现一个名为Clear SSL state的按钮。

单击^(Click)该按钮可从您的 PC中删除SSL缓存。^(SSL)

2]重置网络配置^{(2] Reset Network configuration)}

要重置网络配置^{(Network Configuration)}，您需要以管理员权限打开命令提示符并依次^{(Command Prompt with administrator privilege)}运行以下命令 -

ipconfig /flushdns

ipconfig /renew

ipconfig /registerdns

netsh int ip set dns

netsh winsock reset

在这里，您正在重置 Winsock^{(resetting Winsock)}、重置 TCP/IP、刷新 DNS 缓存^{(flushing DNS cache)}等。

现在，您需要启动您的 PC。如果您使用直接以太网^(Ethernet)连接，您可能需要打开“网络连接^{(Network Connections)}”窗口 (ncpa.cpl) 并输入所有 IP 地址。

提示^(TIP)：Windows 10 中的网络重置功能将帮助您重新安装网络^(Network)适配器并将网络^(Networking) 组件^(Components)重置为原始设置。

3]清除浏览器缓存^{(3] Clear browser cache)}

 如果上述任何解决方案都不起作用，您可能需要浏览器缓存。为此，请打开Google Chrome并在URL栏中输入：chrome://settings/clearBrowserData.

现在，将时间设置为“开始时间”，选择每个项目并单击清除浏览数据^{(CLEAR BROWSING DATA)}按钮。

如果您仍然无法打开这些网站，您可能还需要重置或重新安装 Chrome 浏览器^{(reset or reinstall Chrome browser)}。

希望您可以按照本指南解决问题。^{(Hope you can fix the issue by following this guide.)}

NET::ERR_CERT_WEAK_SIGNATURE_ALGORITHM error in Chrome

If yoυ are using Google Chrome and receive an error message Your connection is not private, Attackers might be trying to steal your information from domain_name.com, NET::ERR_CERT_WEAK_SIGNATURE_ALGORITHM here are some potential solutions that you might want to check. This particular problem mainly occurs with the HTTPS sites or sites using SSL certificates.

NET::ERR_CERT_WEAK_SIGNATURE_ALGORITHM

This problem might occur due to the same reason that prevents users from opening HTTPS sites in any browser. And so the solutions are the same as well.

Before you begin, if you have recently installed any anti-malware or firewall software and started facing this issue, try disabling them temporarily and check if you can open the website or not.

Now, if you are getting this issue on your computer, you can try opening the same website on your mobile or another computer. Connect the secondary device to the same internet connection and try opening the same website. If the site is opening on the secondary device, the problem exists on your primary computer. If the site is not opening on the secondary device, connect it to a different internet connection and try opening the same site. If it is opening now, that implies the problem exists in your network. For the first problem, you need to follow the 2

If the problem lies with your computer, you need to follow the 1st and 3rd suggestions, but if the problem lies with your network connection follow the 4th suggestion and reset your network configuration.

1] Clear SSL State

The basic solution is to remove the SSL cache. To do this, you need to open “Internet Options”. To do so, press Win+R, type inetcpl.cpl and hit the Enter button. Following that, switch to “Content” tab. Under Certificates, you will find a button called Clear SSL state.

Click on that button to remove SSL cache from your PC.

2] Reset Network configuration

For resetting the Network Configuration, you need to open the Command Prompt with administrator privilege and run the following commands one after the other-

ipconfig /flushdns

ipconfig /renew

ipconfig /registerdns

netsh int ip set dns

netsh winsock reset

Here you are resetting Winsock, resetting TCP/IP, flushing DNS cache, etc.

Now, you need to start your PC. If you use a direct Ethernet connection, you might need to open the Network Connections window (ncpa.cpl) and enter all the IP addresses.

TIP: The Network Reset feature in Windows 10 will help you reinstall Network adapters and reset Networking Components to original settings.

3] Clear browser cache

 If any of the above solutions are not working, you may have to your browser cache. For that, open Google Chrome and enter this in the URL bar: chrome://settings/clearBrowserData.

Now, set the time to “the beginning of time,” select every item and click on CLEAR BROWSING DATA button.

If you are still unable to open those websites, you may have to reset or reinstall Chrome browser as well.

Hope you can fix the issue by following this guide.

Related posts

• 在Windows 10/8/7中的Chrome中不能在load plugin

• 您的连接被中断，检测到network change

• Google Chrome上的Fix ERR_SSL_PROTOCOL_ERROR

• Google Chrome Windows 10的问题和问题

• 本网站在Edge，Chrome or Firefox中没有安全消息

• 始终在Chrome中的关联应用程序中打开此类型的链接

• 如何在Edge，Chrome and Firefox browsers之间同步Tabs

• Google Chrome Browser的10个最佳主题

• 如何在Chrome browser中Empty Cache & Hard Reload

• 如何在Chrome中选择退出Google FLoC（Privacy Sandbox）

• 如何将自定义Keyboard Shortcut设置为Chrome Extension

• 在Chrome中为Remote Access主机启用更少的针对性身份验证

• 如何在Google Chrome Browser Close上Destroy Profile

• Google Chrome中Error Code 105 ERR_NAME_NOT_RESOLVED

• 禁用，卸载Adobe Flash，Shockwave在Chrome，Firefox，Edge中，即

• Chrome update失败，错误代码3,4，7，10，11，12等

• FIX：Vimeo不在Chrome or Firefox工作

• 如何清除Cache，Cookies，Browsing History在Chrome and Firefox

• Firefox and Chrome browsers上的多个打开选项卡Search

• 在Chrome or Edge中启用Source View中的Line Wrap