在将您的 PC 升级到 Windows 10 或将其更新到较新版本时，您的系统可能会卡在“准备好 Windows，不要关闭^(Turn)您的计算机^(Computer)”屏幕上。如果您遇到这种情况，请不要担心，因为今天我们将看到如何解决这个烦人的问题。

用户遇到此问题的原因没有特别的原因，但有时可能是由过时或不兼容的驱动程序引起的。但这也可能发生，因为有近 7 亿台Windows 10设备，并且新的更新需要一些时间来安装，可能会持续几个小时。因此，与其急于求成，不如让您的 PC 过夜以查看更新是否已成功安装，如果没有，请按照下面列出的教程查看如何修复 PC 卡^{(Fix PC Stuck)}在Getting Windows Ready上，不要关闭^(Turn)您的计算机^(Computer)问题.

修复 PC 卡^{(Fix PC Stuck)}在Windows Ready^{(Getting Windows Ready)}上，不要关闭^(Turn)计算机^(Computer)

方法 1：在做任何事情之前等待几个小时^{(Method 1: Wait For Few Hours Before Doing Anything)}

有时最好等待几个小时再对上述问题进行任何处理，或者让您的 PC 过夜，看看早上您是否仍然停留在“准备好 Windows，不要关闭您的计算机^{(Getting Windows Ready, Don’t Turn off Your Computer)}”屏幕上。这是一个重要的步骤，因为有时您的 PC 可能正在下载或安装一些可能需要一些时间才能完成的文件，因此，最好等待几个小时再将其声明为问题。

但是，如果您等了 5-6 个小时后仍然停留在“ Getting Windows Ready ”屏幕上，那么是时候解决问题了，所以不要浪费时间遵循下一个方法。

方法 2：执行硬重置

您应该尝试的第一件事是从笔记本电脑中取出电池，然后拔下所有其他USB附件、电源线等。完成后，按住电源按钮 10 秒钟，然后再次插入电池并尝试再次为电池充电，看看您是否可以在Windows 10中使用光标^(Cursor)修复^(Startup)黑屏^{(Black Screen)}。

1.关闭您的笔记本电脑^{(Power off your laptop)}，然后拔下电源线，放置几分钟。

2. 现在从后面取出电池并^{(remove the battery)}按住电源按钮 15-20 秒。^{(hold the power button for 15-20 seconds.)}

注意：^(Note:)暂时不要连接电源线；我们会告诉你什么时候这样做。

3. 现在插入电源线^{(plug in your power cord)}（不应插入电池）并尝试启动笔记本电脑。

4. 如果它正常启动，然后再次关闭你的笔记本电脑。放入电池并再次启动您的笔记本电脑。

如果问题仍然存在，请再次关闭您的笔记本电脑，移除电源线和电池。按住^(Press)电源按钮 15-20 秒，然后插入电池。打开笔记本电脑的电源，这应该可以修复 PC 卡在准备好 Windows 上，不要关闭计算机。^{(Fix PC Stuck on Getting Windows Ready, Don’t Turn off Your Computer.)}

方法3：Run Automatic/Startup Repair

1.插入 Windows 10 可启动安装 DVD^{(Insert the Windows 10 bootable installation DVD)}并重新启动您的 PC。

2. 当提示Press any key to boot from CD or DVD时，按任意键继续。

3. 选择您的语言首选项，然后单击下一步^(Next)。单击左下角的修复计算机。^{(Click Repair)}

4. 在选择选项屏幕上，单击疑难解答^{(Troubleshoot)}。

5. 在疑难解答^{(Troubleshoot)}屏幕上，单击高级选项^{(Advanced option)}。

6. 在高级^(Advanced)选项屏幕上，单击自动修复或启动修复^{(Automatic Repair or Startup Repair)}。

7. 等到Windows Automatic/Startup Repairs完成。

8.重新启动^(Restart)，您已成功修复PC卡在Getting Windows Ready上，不要关闭您的计算机^{(Fix PC Stuck on Getting Windows Ready, Don’t Turn off Your Computer)}，如果没有，请继续。

另外，请阅读 如何修复自动修复无法修复您的 PC。^{(How to fix Automatic Repair couldn’t repair your PC.)}

方法 4：运行系统文件检查器^{(Method 4: Run System File Checker)}

1.再次^(Again)使用方法 1 进入命令提示符，单击高级^(Advanced)选项屏幕中的命令提示符。

2. 在 cmd 中输入以下命令并在每个命令后按回车键：

sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
chkdsk C: /f /r /x

注意：确保^(Make)使用当前安装Windows的驱动器号。^(Windows)同样在上面的命令中 C: 是我们要检查磁盘的驱动器，/f 代表一个标志，它允许 chkdsk 修复与驱动器相关的任何错误，/r 让 chkdsk 搜索坏扇区并执行恢复和 / x 指示检查磁盘在开始该过程之前卸载驱动器。

3. 退出命令提示符并重新启动 PC。

方法 5：重置 Windows 10^{(Method 5: Reset Windows 10)}

1. 重新启动您的 PC 几次，直到您开始自动修复。^{(Automatic Repair.)}

2. 选择Troubleshoot > Reset this PC > Remove everything.

3. 对于下一步，系统可能会要求您插入Windows 10安装介质，因此请确保您已准备好。

4. 现在，选择您的Windows版本，然后仅单击安装Windows的驱动器>删除我的文件。^{(remove my files.)}

5. 单击重置按钮。^{( Reset button.)}

6. 按照屏幕上的说明完成重置。

受到推崇的：^{(Recommended:)}

• 如何安装 Exodus Kodi 2018
• 不要自动加密移动到 Windows 10 中加密文件夹的文件^{(Do not Automatically Encrypt files moved to Encrypted folders in Windows 10)}
• 在 Windows 10 的文件资源管理器中启用或禁用状态栏^{(Enable or Disable Status Bar in File Explorer in Windows 10)}
• 如何在 Windows 10 中禁用全屏优化^{(How to Disable Fullscreen Optimizations in Windows 10)}

就是这样，您已经成功地学习了如何修复^(How)PC 卡在准备好 Windows 上，不要关闭您的计算机^{(Fix PC Stuck on Getting Windows Ready, Don’t Turn off Your Computer)}，但是如果您对本教程仍有任何疑问，请随时在评论部分提出。

Fix PC Stuck on Getting Windows Ready, Don't Turn off Your Computer

While upgrading your PC to Windows 10 or updating it to the newer versiоn yоur sуstem might get stuck on the screen “Getting Windows Ready, Don’t Τurn off Your Computer”. If this іs the case with you then don’t worry as today we are going to see how to fix this annoying issue.

There is no particular cause as to why the users are experiencing this issue, but sometimes it can be caused by outdated or incompatible drivers. But this can also happen because there are nearly 700 million Windows 10 devices and the new updates will take some time to install, which can stretch to several hours. So instead of rushing, you could leave your PC overnight to see if the updates were successfully installed, if not, then follow the below-listed tutorial to see how to Fix PC Stuck on Getting Windows Ready, Don’t Turn off Your Computer problem.

Fix PC Stuck on Getting Windows Ready, Don’t Turn off Your Computer

Method 1: Wait For Few Hours Before Doing Anything

Sometimes it is best to wait for few hours before doing anything about the above issue, or leave your PC for overnight and see if in the morning you are still stuck on the ‘Getting Windows Ready, Don’t Turn off Your Computer‘ screen. This is an important step because sometimes your PC may be downloading or installing some files which might be taking some time to finish, therefore, it is best to wait for few hours before declaring this as an issue.

But if you have waited for say 5-6 hours and are still stuck on the “Getting Windows Ready” screen, it’s time to troubleshoot the issue, so without wasting time following the next method.

Method 2: Perform Hard Reset

The first thing you should try is removing your battery from the laptop and then unplugging all the other USB attachment, power cord etc. Once you have done that, press and hold the power button for 10 seconds and then again insert the battery and try to charge your battery again, see if you can Fix Black Screen With Cursor On Startup in Windows 10.

1. Power off your laptop then remove the power cord, leave it for a few minutes.

2. Now remove the battery from behind and press & hold the power button for 15-20 seconds.

Note: Do not connect the power cord just yet; we will tell you when to do that.

3. Now plug in your power cord (battery should not be inserted) and trying booting up your laptop.

4. If it’s boot properly, then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should Fix PC Stuck on Getting Windows Ready, Don’t Turn off Your Computer.

Method 3: Run Automatic/Startup Repair

1. Insert the Windows 10 bootable installation DVD and restart your PC.

2. When prompted to Press any key to boot from CD or DVD, press any key to continue.

3. Select your language preferences, and click Next. Click Repair your computer in the bottom-left.

4. On choose an option screen, click Troubleshoot.

5. On Troubleshoot screen, click the Advanced option.

6. On the Advanced options screen, click Automatic Repair or Startup Repair.

7. Wait till the Windows Automatic/Startup Repairs complete.

8. Restart and you have successfully Fix PC Stuck on Getting Windows Ready, Don’t Turn off Your Computer, if not, continue.

Also, read How to fix Automatic Repair couldn’t repair your PC.

Method 4: Run System File Checker

1. Again go to command prompt using the method 1, click on command prompt in the Advanced options screen.

2. Type the following command in cmd and hit enter after each one:

sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
chkdsk C: /f /r /x

Note: Make sure you use the drive letter where Windows is currently installed. Also in the above command C: is the drive on which we want to check disk, /f stands for a flag which chkdsk the permission to fix any errors associated with the drive, /r let chkdsk search for bad sectors and perform recovery and /x instructs the check disk to dismount the drive before beginning the process.

3. Exit the command prompt and restart your PC.

Method 5: Reset Windows 10

1. Restart your PC a few times until you start Automatic Repair.

2. Select Troubleshoot > Reset this PC > Remove everything.

3. For the next step, you might be asked to insert Windows 10 installation media, so ensure you have it ready.

4. Now, select your Windows version and click on only the drive where Windows is installed > remove my files.

5. Click on the Reset button.

6. Follow the instructions on the screen to complete the reset.

Recommended:

• How to Install Exodus Kodi 2018
• Do not Automatically Encrypt files moved to Encrypted folders in Windows 10
• Enable or Disable Status Bar in File Explorer in Windows 10
• How to Disable Fullscreen Optimizations in Windows 10

That’s it you have successfully learned How to Fix PC Stuck on Getting Windows Ready, Don’t Turn off Your Computer but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• 修复 Windows 10 卡在 Windows Ready 上的问题

• 如何Fix PC Won125 POST

• Fix Computer直到重新启动多次

• Fix Computer无法识别iPhone

• Fix Computer Wo在Windows 10中没有转到Sleep Mode

• 如何修复电脑显示器显示问题

• Windows 10中的Fix Black Desktop Background

• Allocating Disk Space上的Fix Steam Stuck Windows

• Fix USB Keeps Disconnecting and Reconnecting

• 修复 Windows 10 卡在重启循环中

• 修复计算机没有重新同步，因为没有时间数据可用

• Fix High CPU Usage Service Host：本地系统

• Fix Windows无法与device or resource通信

• 如何Fix Application Load Error 5:0000065434

• 修复PC打开但没有显示

• 当Computer打开时，Fix Screen Goes睡眠

• Fix Windows Computer重新启动而不警告

• Fix uTorrent Stuck连接到同行

• 如何自动关闭

• Fix Unable打开Local Disk（c :)