如果您在尝试在 Windows 10 设备上安装语言包时遇到抱歉，我们无法安装此功能 - 错误代码 0x80240439^{(Sorry, we’re having trouble getting this feature installed – Error code 0x80240439)}，那么这篇文章旨在帮助您。在这篇文章中，我们将提供您可以尝试成功解决此问题的最合适的解决方案。请注意，存在相同错误消息但错误代码不同的各种实例。无论如何，本文中概述的解决方案都适用。

^{(Language Pack Error 0x80240439)}Windows 10 中的语言包错误 0x80240439

如果您遇到此问题，您可以尝试以下我们推荐的解决方案（不分先后顺序），看看是否有助于解决问题。

1. 关闭^(Turn)计量连接^{(Metered Connection)}（如果适用）
2. 在干净启动^{(Clean Boot)}状态下安装语言包^{(Language Pack)}
3. 配置 Windows 10 以从Windows 更新^{(Windows Update)}下载和安装 LP
4. 手动^(Manually)下载和安装语言包^{(Language Pack)}

让我们看一下关于列出的每个解决方案所涉及的过程的描述。

1]关闭^(Turn)计量连接^{(Metered Connection)}（如果适用）

检查计量连接拨动开关^{(metered connection toggle switch i.e. On or OFF)}的当前状态，即 On 或 OFF 。如果您之前已启用此功能，请将其关闭，然后仅完成特定语言包的安装。

2]在干净启动^{(Clean Boot)}状态下安装语言包^{(Language Pack)}

此解决方案要求您执行干净启动^{(perform a clean boot)}，然后重试语言包安装，看看它是否在没有“抱歉，我们无法安装此功能 - 错误代码 0x80240439^{(Sorry, we’re having trouble getting this feature installed – Error code 0x80240439)} ”问题的情况下完成。

3]配置Windows 10 以从^(Configure)Windows 更新^{(Windows Update)}下载和安装 LP

现在在Windows 10中，FOD（Features on Demand）和语言包只能从Windows Update安装，而不能通过WSUS安装。

如果您无法按需安装^(Demand)Windows 10功能，则需要将组策略配置为直接转到 Windows 更新以下载并安装 FOD。

4 ]手动^{(] Manually)}下载和安装语言包^{(Language Pack)}

首先，从 Internet 下载您要安装的语言包。确保下载（见下表）您的 Windows 10 架构 32 位/64 位支持的语言包。下载后，请按照以下说明手动安装语言包。

• 按Windows key + R调用“运行”对话框。
• 在“运行”对话框中，键入lpksetup.exe并按 Enter。
• 在出现的安装或卸载显示语言^{(Install or Uninstall display languages)}窗口中，选择安装显示语言^{(Install display languages)}。
• 单击浏览^(Browse)按钮并从您的硬盘驱动器中选择下载的语言包 (.cab)。^(Language)
• 单击确定^(OK)。
• 单击下一步^(Next)继续并等待安装完成。

Windows 10 MUI 语言包^{(Windows 10 MUI Language Packs)}

希望这可以帮助！

Language Pack Error 0x80240439: Trouble getting this feature installed

If you encounter Sorry, we’re having trouble getting this feature installed – Error code 0x80240439 when you attempt to install language packs on your Windows 10 device, then this post is intended to help you. In this post, we will offer the most suitable solutions you can try to successfully resolve this issue. Note that there are various instances of this same error message but different error codes. In any case, the solutions outlined in this post applies.

Language Pack Error 0x80240439 in Windows 10

If you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.

1. Turn off Metered Connection (if applicable)
2. Install the Language Pack in Clean Boot state
3. Configure Windows 10 to download & install the LP from Windows Update
4. Manually download & install the Language Pack

Let’s take a look at the description of the process involved concerning each of the listed solutions.

1] Turn off Metered Connection (if applicable)

Check the current state of the metered connection toggle switch i.e. On or OFF. If you have enabled this previously, turn this off then only complete the installation of specific language packs.

2] Install the Language Pack in Clean Boot state

This solution requires you to perform a clean boot and then retry the language pack installation and see if it completes without the Sorry, we’re having trouble getting this feature installed – Error code 0x80240439 issue.

3] Configure Windows 10 to download & install the LP from Windows Update

In Windows 10 now, FOD (Features on Demand) and language packs can only be installed from Windows Update and not via WSUS.

If you cannot install Windows 10 Features on Demand, you’ll need to configure the Group Policy to go directly to Windows Update to download and install FOD.

4] Manually download & install the Language Pack

First, download the language pack you want to install from the internet. Make sure you download (see table below) the language pack that is supported by your Windows 10 architecture 32-bit/64-bit. Once downloaded, follow the instructions below to install the language pack manually.

• Press Windows key + R to invoke the Run dialog.
• In the Run dialog box, type lpksetup.exe and hit Enter.
• On the Install or Uninstall display languages window that appears, select Install display languages.
• Click the Browse button and select the downloaded Language pack (.cab) from your hard drive.
• Click OK.
• Click Next to continue and wait for the installation to complete.

Windows 10 MUI Language Packs

Hope this helps!

Related posts

• 修复致命错误未找到语言文件

• 如何在Windows 10 PC上使用Input Method Editor（IME）

• 快速学习language online的最佳方式

• 字典.NET是Windows PC的桌面Translator application

• 如何在Windows 11/10中更改News and Interests Feed Language

• 什么是Google Go Programming Language - 要求，FAQ

• Fix BitLocker Drive Encryption不能使用，Error 0x8031004A

• 无法在Windows 10上安装Windows Media Feature Pack

• 如何在 Windows 8 中安装和启用新的显示语言

• 如何安装和Windows 11/10 Uninstall Languages

• Fix Microsoft Store Error 0x80072F7D

• 在Windows 10中无法在Input Languages之间切换

• Fix Application Load Error 5:0000065434在Windows 10上

• Fix Amazon PrimeVideo Error Code 7031

• Fix的Windows 10 Update Error 0x800703F1

• 在 Windows 7 Ultimate 中安装并更改为新的显示语言

• 如何制作自己的电报贴纸包

• 如何在 Windows 8.1 中执行自然语言搜索

• 如何更改Microsoft Edge中的语言Windows 10

• Fix VALORANT Error Code 31和84在Windows PC上