Roblox是一个在线游戏平台和游戏创建系统,允许用户设计自己的游戏并玩其他用户创建的各种不同的游戏。在今天的帖子中,我们将确定一些可能在 Xbox One 或 Windows 10 上触发在线游戏平台Roblox 错误代码 6、279 或 610(Roblox error codes 6, 279 or 610)的潜在已知原因,并(, )提供您可以尝试帮助解决问题的可能解决方案与上述三个错误代码有关。
要成功解决任何Roblox 错误代码 279、6、610(Roblox error codes 279, 6, 610),您可以按照下面列出的与每个错误相关的说明进行操作。
Roblox 错误代码 279
这个Roblox 错误代码 279(Roblox error code 279)是一个连接问题,阻止玩家访问游戏的在线世界。该错误将与以下消息一起显示:
Failed to connect to the Game. (ID=17: Connection attempt failed.) (Error Code: 279)
当您收到错误代码时,这通常是由于连接问题,这意味着您的系统上的某些东西要么干扰它,要么阻止它。
经调查,发现此错误的主要原因但不限于以下几点:
- 糟糕的游戏:在某些情况下,问题仅限于少数游戏服务器。当脚本中存在错误或游戏中的对象超出游戏可以处理的范围时,就会发生这种情况。如果您发现问题确实仅限于少数游戏服务器,则应将其报告给其创建者,以便他们进行修复。
- 互联网连接缓慢。
- Windows 防火墙:如果您没有通过Windows 防火墙允许(Windows Firewall)Roblox所需的连接,它们将被阻止并且您将收到错误消息。
如果您遇到Roblox 错误代码 279(Roblox error code 279),您可以尝试以下我们推荐的解决方案(不分先后顺序),看看是否有助于解决问题。
- 关闭 Windows Defender 防火墙
- 使用支持的网络浏览器
- 禁用第三方网络浏览器插件
- 打开所需的端口
- 关闭第三方防病毒软件
让我们看一下与列出的每个解决方案相关的过程的描述。
1]关闭(Turn)Windows Defender防火墙(Windows Defender Firewall)
此解决方案要求您暂时关闭 Windows Defender 防火墙(turn off Windows Defender Firewall)。完成后,尝试再次连接到游戏以查看问题是否仍然存在。如果已经解决,可能是由于Windows 防火墙(Windows Firewall)的限制。
如果错误代码 279(error code 279)未解决,您可以继续下一个解决方案。
2]使用支持的网络浏览器
如果您更喜欢在网络浏览器上使用Roblox平台,而不是在您的系统或智能手机上下载该应用程序,则必须确保您在受支持的浏览器上运行它。Roblox不支持某些浏览器,因此如果您使用其中一种浏览器,您将无法进入游戏。
2011 年,Roblox与Google Chrome和Mozilla Firefox兼容,但您仍需要在 PC 上安装Roblox浏览器才能访问。一年后,当新版本不再与Roblox浏览器绑定时,所有问题都结束了。
因此,您可以尝试三种主要浏览器中的任何一种,并确保网络浏览器是最新的(three major browsers and make sure that the web browser is up to date)。过时的浏览器也可能导致错误代码 279(error code 279)。
如果您使用受支持的浏览器并且它们是最新的,但仍然遇到此错误,您可以尝试下一个解决方案。
3]禁用第三方网络浏览器插件
浏览器上的插件有时也会触发Roblox 错误代码 279(Roblox error code 279)。
如果您在浏览器上安装了任何Adblocker插件,它们可能会导致游戏根本无法加载。因此,此解决方案要求您在访问网站之前禁用所有此类加载项(disable all such add-ons),然后查看问题是否仍然存在。如果是这样,请尝试下一个解决方案。
4]打开所需的端口
如果您的网络上未打开Roblox所需的端口范围,也可能导致错误代码 279 。
此解决方案要求您将它们端口转发,以便它们可以开放使用,并且Roblox可以轻松连接。
就是这样:
- (Log)以管理员身份登录到您的路由器控制面板。
- 导航到端口转发(port forwarding) 类别。
- 输入系统的 IP 地址后,输入 49152–65535 端口范围并选择 UDP 作为协议。
- 完成后,重新启动路由器。
检查问题是否已解决。如果没有,请继续下一个解决方案。
5]关闭第三方防病毒软件
在某些情况下,您系统上的第三方防病毒软件也会干扰Roblox的连接过程,导致您无法连接到游戏。因此,暂时禁用您的防病毒软件或完全卸载,这会将Windows Defender设置为主要安全软件,然后尝试连接。如果问题得到解决,您将不得不为 Roblox 添加一个例外(add an exception for Roblox)。
相关(Related):修复Roblox 错误代码 524 和 264(Roblox error code 524 and 264)。
Roblox 错误代码 6
经过调查,发现此Roblox 错误代码 6(Roblox error code 6)的主要原因但不限于以下几点:
- 互联网连接:(Internet Connection: )互联网的DNS缓存可能已损坏,因为连接被中断,或者路由器的防火墙阻止了连接的建立。
- IPv4 配置: (IPv4 Configuration: )某些IPv4 配置(IPv4 Configurations)可能未正确设置,因此触发了问题。IPv4的配置设置中有两个选项,它允许用户手动或自动选择设置。如果计算机配置为自动识别配置,有时它可能无法准确检测到它们,因此可能会触发此错误。
如果您遇到Roblox 错误代码 6(Roblox error code 6),您可以尝试以下我们推荐的解决方案(不分先后顺序),看看是否有助于解决问题。
- 重启互联网路由器
- 将IPv4(IPv4)配置更改为Google 公共 DNS IP(Google Public DNS IP) 地址
- 切换互联网连接/帐户
让我们看一下与列出的每个解决方案相关的过程的描述。
1]重启互联网路由器
在某些情况下,路由器中可能会堆积损坏的DNS缓存或其他启动配置。
此解决方案要求您通过重启路由器来完全清除此缓存。
就是这样:
- 从路由器上拔下电源。
- 按住路由器的电源按钮至少 10 秒钟。
- 重新插入电源并等待路由器启动。
尝试连接到游戏并检查Roblox 错误代码 6(Roblox error code 6)是否仍然存在。如果是这样,请尝试下一个解决方案。
2]将IPv4配置更改为(Change)Google Public DNS IP 地址
如果计算机无法自动获取DNS 服务器地址(DNS Server Addresses),则可能会触发错误代码 6 。(error code 6)
此解决方案要求您打开网络(Network) 属性(Properties)并手动输入 Google 公共 DNS IP 地址(enter the Google Public DNS IP addresses manually)。
如果这不能解决问题,请尝试下一个解决方案。
3]切换(Switch)互联网连接/帐户
由于此Roblox 错误代码 6(Roblox error code 6 )主要与互联网和帐户(Account)有关,您可以尝试使用不同的互联网连接连接到游戏并检查是否可以解决问题。如果是这样,则意味着您的ISP负责阻止您与游戏的连接。您可以联系他们并查看他们是否可以提供帮助。如果这不能解决您的问题,请尝试使用其他帐户登录,看看是否有帮助。通过这种方式,您可以确定问题是否与您的帐户或您的连接有关,然后进行相应的故障排除。
Roblox 错误代码 610
发生此错误时,您会收到以下错误消息;
Join Error
Can’t join place 1307349964: HTTP 400 (Unknown
error.)
(Error Code: 610)
经调查,发现此Roblox 错误代码 610(Roblox error code 610)的主要原因但不限于以下几点:
- Roblox服务器可能因定期维护而停机,或者其服务器存在一些计划外问题。
- 帐户故障。
- Roblox的网页版正在维护中,比桌面版不稳定得多。
- 缓存的 DNS 错误。
如果您遇到Roblox 错误代码 610(Roblox error code 610),您可以尝试以下我们推荐的解决方案(不分先后顺序),看看是否有助于解决问题。
- 检查 Roblox 服务器状态
- 登出并登入帐户
- (Download)将Roblox应用程序(Roblox)下载并安装到您的计算机上(仅适用于 Windows 10 PC)
- 创建一个新账户
- 刷新 IP 和 DNS 配置
让我们看一下与列出的每个解决方案相关的过程的描述。
1]检查Roblox服务器状态
此解决方案要求您检查问题是在您这边还是在开发人员这边。您可以通过检查Roblox服务器是否正常运行并且未在维护中来做到这一点。
请执行下列操作:
在计算机上,启动您选择的任何浏览器并导航到该地址(this address)并检查服务器是否已关闭。
如果该站点功能齐全,该站点将在其名称下声明Roblox 没有问题。(No Problems with Roblox)
如果服务器出现故障,除了等待它之外,您无能为力。但是,如果服务器正常运行并且您仍然收到错误代码 610(error code 610),则可以继续下一个解决方案。
2] 登出并登入帐户
一些用户报告说,通过在再次登录之前退出他们的帐户和所有其他会话,他们能够解决此Roblox 错误代码 610(Roblox error code 610)。
如果此解决方案不适合您,请尝试下一个解决方案。
3 ] 在您的计算机上下载(] Download)并安装Roblox应用程序(仅适用于 Windows 10 PC)
此解决方案仅适用于Windows 10,因为它是唯一一个包含Roblox应用程序的操作系统,您可以将其物理安装在您的计算机上。
请执行下列操作:
- 打开微软商店(Open the Microsoft Store)。
- 搜索Roblox并下载该应用程序。
- 下载完成后,您将被带到Microsoft Store窗口。到达那里后,按 Play 启动游戏的桌面版本。
- 接下来,使用您的用户凭据注册以登录。
- 现在,导航到游戏(Game)选项卡并启动任何模式以查看错误代码 610(error code 610)是否已解决。如果没有,请尝试下一个解决方案。
4]创建一个新帐户
一些受影响的用户报告说,他们能够通过创建新用户帐户并启动相同的游戏模式来解决Roblox 错误代码 610 。(Roblox error code 610)
请执行下列操作:
- 访问 Roblox.com 并单击 注册。(Sign Up.)
如果您已经登录,请单击齿轮图标并选择 注销( Log Out)。
- 使用必要的信息填写 注册(Signup) 表单,然后单击 注册(Sign Up) 以注册您的新帐户。
- 之后(Afterward),使用您新创建的帐户登录并启动游戏模式以查看问题是否仍然存在。如果是这样,请继续下一个解决方案。
5]刷新IP和DNS配置
一些受影响的用户报告说,他们在刷新所有保存的 DNS 地址(flushing any saved DNS addresses)后终于能够再次播放,然后关闭并重新打开他们的网络浏览器。
如果本文中针对Roblox 错误代码 279、6、610(Roblox error codes 279, 6, 610)列出的任何故障排除步骤 都没有帮助您,您可能需要联系Roblox 客户支持(customer support) 以寻求帮助。
Let’s know in the comments section below if you tried other solutions not listed in this post that fixed the Roblox error codes 279, 6, 610 for you!
相关帖子(Related post):如何修复Roblox 错误代码 106、110、116(Roblox error codes 106, 110, 116)。
How to fix Roblox error codes 6, 279, 610 on Xbox One or PC
Roblox is an online game platform and game creation system that allows users to design their own games and play a wide variety of different games created by other users. In today’s post, we will identify some potential known causes that can trigger the online gaming platform Roblox error codes 6, 279 or 610 on Xbox One or Windows 10, as well as provide the possible solutions you can try to help remediate the issue as it relates to the three aforementioned error codes.
To successfully resolve any of the Roblox error codes 279, 6, 610, you can follow the instructions outlined below associated with each error.
Roblox error code 279
This Roblox error code 279 is a connection issue, preventing players from accessing the game’s online world. The error will be displayed alongside the following message:
Failed to connect to the Game. (ID=17: Connection attempt failed.) (Error Code: 279)
When you get the error code, this is usually due to connection issues meaning something on your system is either interfering with it or blocking it.
On investigation, it was discovered that the main causes for this error, but not limited to, are as follows:
- A bad game: In some cases, the issue is restricted to a few game servers only. This can happen when there are errors in the scripting or the objects in the game are more than what the game can handle. If you figure out that the issue is indeed restricted to a few game servers only, you should report it to their creators so that they can work on a fix.
- Slow Internet Connection.
- Windows Firewall: If you have not allowed the required connections for Roblox through the Windows Firewall, they will be blocked and you will get the error.
If you’re faced with the Roblox error code 279, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.
- Turn off Windows Defender Firewall
- Use a supported web browser
- Disable third-party web browser addons
- Open required ports
- Turn off third-party Antivirus
Let’s take a look at the description of the process involved in relation to each of the listed solutions.
1] Turn off Windows Defender Firewall
This solution requires you temporarily turn off Windows Defender Firewall. Once done, try connecting to the game again to see if the issue persists. If it has been solved, it is probably due to the restrictions imposed by the Windows Firewall.
If the error code 279 isn’t resolved, you can continue with the next solution.
2] Use a supported web browser
If you prefer to use the Roblox platform on the web browser instead of downloading the app on your system or smartphone, you will have to make sure you are running it on a supported browser. Some browsers are not supported by Roblox and thus you will not be able to get into a game if you are using one of them.
In 2011, Roblox was compatible with Google Chrome and Mozilla Firefox, but you still needed to install the Roblox browser on your PC in order to get access. All issues ended a year later when the new release was not tied to the Roblox browser anymore.
So you can try any of the three major browsers and make sure that the web browser is up to date. Obsolete browsers can also cause the error code 279.
If you’re using supported browsers and they are up to date, but still facing this error, you can try the next solution.
3] Disable third-party web browser addons
The addons on your browser can also sometimes trigger the Roblox error code 279.
If you have installed any Adblocker addons on your browser, they can result in the gaming not loading at all. So, this solution requires you disable all such add-ons before accessing the website and then see if the issue persists. If so, try the next solution.
4] Open required ports
The error code 279 can also be caused if the required range of ports for Roblox is not open on your network.
This solution requires you port forward them so that they are open for use and Roblox can easily connect.
Here’s how:
- Log in as an administrator to your router control panel.
- Navigate to the port forwarding category.
- After entering the IP address of your system, enter 49152–65535 port range and select UDP as the protocol.
- Once done, restart your router.
Check to see if the issue is resolved. If not, continue with the next solution.
5] Turn off third-party Antivirus
In some cases, the third-party antivirus on your system can also interfere with the connection process of Roblox due to which you are not able to connect to the game. Therefore, disable your antivirus software temporarily or completely uninstall, which will now set Windows Defender as the primary security software, and then try connecting. If the issue is resolved, you will have to add an exception for Roblox.
Related: Fix Roblox error code 524 and 264.
Roblox error code 6
On investigation, it was discovered that the main causes for this Roblox error code 6, but not limited to, are as follows:
- Internet Connection: It’s likely the internet’s DNS cache might have been corrupted due to which the connection is being interrupted or maybe the router’s firewall is blocking the connection from being made.
- IPv4 Configuration: It is possible that some of the IPv4 Configurations aren’t set properly due to which the issue is being triggered. There are two options in the configuration settings for IPv4, it allows the users to either select the settings manually or automatically. If the computer is configured to identify the configurations automatically, sometimes, it might not detect them accurately due to which this error might be triggered.
If you’re faced with the Roblox error code 6, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.
- Power-cycle the internet router
- Change the IPv4 configuration to Google Public DNS IP addresses
- Switch internet connection/account
Let’s take a look at the description of the process involved in relation to each of the listed solutions.
1] Power-cycle the internet router
In some cases, there might be a build-up of corrupt DNS cache or other startup configurations in the router.
This solution requires you completely clear this cache by power cycling the router.
Here’s how:
- Unplug the power from the router.
- Press and hold the power button of the router for at least 10 seconds.
- Plug the power back in and wait for the router to start.
Try to connect to the game and check to see if the Roblox error code 6 persists. If so, try the next solution.
2] Change the IPv4 configuration to Google Public DNS IP addresses
If the computer is failing to obtain the DNS Server Addresses automatically, the error code 6 might be triggered.
This solution requires you to open the Network Properties and enter the Google Public DNS IP addresses manually.
If this doesn’t resolve the issue, try the next solution.
3] Switch internet connection/account
Since this Roblox error code 6 is mostly related to the internet and the Account, you can try to connect to the game using a different internet connection and check to see if that fixes the issue. If it does, it means that your ISP is responsible for blocking your connection to the game. You can contact them and check to see if they can help. If that doesn’t fix your issue, try to sign in with a different account and see if that helps. In this way, you can determine if the issue is related to your account or your connection and then troubleshoot accordingly.
Roblox error code 610
When this error occurs, you receive the following error message;
Join Error
Can’t join place 1307349964: HTTP 400 (Unknown
error.)
(Error Code: 610)
On investigation, it was discovered that the main causes for this Roblox error code 610, but not limited to, are as follows:
- Roblox servers are down possibly for scheduled maintenance or there are some unplanned problems with their servers.
- Account glitch.
- The web version of Roblox is under maintenance and is much more unstable than the desktop version.
- Bad cached DNS.
If you’re faced with the Roblox error code 610, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.
- Check Roblox server status
- Sign out & in of the account
- Download & install the Roblox app onto your computer (applies to Windows 10 PC only)
- Create a new account
- Refresh IP & DNS Configuration
Let’s take a look at the description of the process involved in relation to each of the listed solutions.
1] Check Roblox server status
This solution requires you to check whether the issue is on your side or on the developers’ side. You can do this by checking if the Roblox servers are functioning properly and aren’t under maintenance.
Do the following:
On a computer, launch any browser of your choice and navigate to this address and check if the servers are down or not.
The site will state No Problems with Roblox under its name if it is fully functional.
If the servers are down, there’s nothing much you can do but to wait it out. But if the servers are functional and you are still receiving the error code 610, you can proceed with the next solution.
2] Sign out & in of the account
Some users reported that by signing out of their account & from all other sessions before logging in again, they were able to resolve this Roblox error code 610.
If this solution doesn’t work for you, try the next solution.
3] Download & install the Roblox app on your computer (applies to Windows 10 PC only)
This solution is only possible on Windows 10, since it’s the only OS that includes a Roblox app that you can physically install on your computer.
Do the following:
- Open the Microsoft Store.
- Search for Roblox and download the app.
- Once the download has been completed, you will be taken to a Microsoft Store window. Once you get there, press Play to launch the desktop version of the game.
- Next, sign up with your user credentials to log in.
- Now, navigate to the Game tab and launch any mode to see if the error code 610 has been resolved. If not, try the next solution.
4] Create a new account
Some affected users reported that they were able to resolve the Roblox error code 610 by creating a new user account and then launched the same game mode.
Do the following:
- Visit Roblox.com and click Sign Up.
If you’re already logged in, click the gear icon and choose Log Out.
- Fill up the Signup form with the necessary information and click on Sign Up to register your new account.
- Afterward, log in with your newly created account and launch a game mode to see if the issue persists. If so, continue with the next solution.
5] Refresh IP & DNS Configuration
A couple of affected users have reported that they were finally able to play again after flushing any saved DNS addresses and then closed and reopened their web browser.
If none of the troubleshooting steps outlined in this post for Roblox error codes 279, 6, 610 doesn’t help you, you may need to contact Roblox customer support for assistance.
Let’s know in the comments section below if you tried other solutions not listed in this post that fixed the Roblox error codes 279, 6, 610 for you!
Related post: How to fix Roblox error codes 106, 110, 116.