Windows 11/10 Safe Mode使用最少的系统文件和设备驱动程序加载操作系统 - 足以启动Windows 操作系统^{(Windows OS)}。在安全模式下，启动程序、加载项等设置不运行。当我们需要解决问题时，我们通常会启动到安全模式。^{(Safe Mode)}这篇文章将向您展示如何在安全模式下^{(Safe Mode)}启用和启动或启动 Windows 11/10 。可能还有其他方法，但我们只介绍最方便的两种方法。

如何在安全模式下启动^(Mode)Windows 11/10

您可以通过三种简单的方法以安全模式启动Windows 11/10

1. 按 Shift^{(Press Shift)}然后单击重新启动^(Restart)
2. 打开更新^(Update)和设置中的^(Settings)恢复^(Recovery)部分，然后单击立即重新启动^(Restart)。
3. 使用 MSConfig^{(Use MSConfig)}或系统配置实用程序^{(System Configuration Utility)}并选择安全^(Safe)启动和最小^(Minimal)选项设置并重新启动。
4. ^(Boot)使用命令提示符^{(Command Prompt)}以安全模式^{(Safe Mode)}启动
5. 通过登录屏幕
6. 启用 F8 键并使用它
7. 从 Windows 恢复驱动器启动
8. 使用 Windows 安装介质

让我们详细看看它们。

1]按Shift^{(Press Shift)}，然后单击重新启动^(Restart)

将Windows 10^{(Windows 10)}启动到安全模式^(Mode)的最简单方法是按Shift 键，然后单击重新启动^{(Shift and then click on Restart)}。这会将您的 Windows 10 计算机重新启动到Advanced Startup Options。

2]打开恢复^(Recovery)部分，然后单击立即重新启动^(Restart)

在Windows 11中，打开Settings > System>Recovery > Advanced启动，然后单击立即重新启动^{(Restart now)}。

在Windows 10中，打开设置^(Settings)应用> Update和安全^(Security)>恢复^(Recovery)。在高级启动下，单击立即重新启动^{(Restart now)}。

当您按照上述两种方法中的任何一种进行操作时，您的Windows计算机将重新启动，您将看到以下屏幕。

单击疑难解答^{(Troubleshoot)}继续。

现在按照Windows 中的高级启动选项中^{(Advanced Startup options in Windows.)}规定的步骤进行操作。

它将带您完成整个过程，从– Troubleshoot > Advanced Options > Startup Settings > Restart > Press No 4键。

如果您正确地遵循了该过程，您最终将进入启动设置^{(Startup Settings)}屏幕，您将能够从该屏幕启用安全模式^(Mode)。

按^(Press)“4”键，您的计算机将重新启动并进入安全模式^{(Safe Mode)}。要以带网络的安全模式^{(Safe Mode with Networking)}重新启动，请按“5”键。要使用命令提示符以安全模式^{(Safe Mode with Command Prompt)}重新启动，请按“6”键。

您将在左下角和右下角看到带有安全模式水印的黑色桌面。^(Mode)

阅读^(Read)：如何在 Windows 11/10 上启用 F8 键以启动进入安全模式。

3]使用MSConfig^{(Use MSConfig)}或系统配置实用程序^{(System Configuration Utility)}

当然，另一种简单的方法是使用内置的系统配置实用程序^{(System Configuration Utility)}。从Win+X Menu中，打开运行^(Run)框，键入msconfig并按 Enter。

在Boot选项卡下，检查Safe boot和Minimal options。Click Apply/OK并退出。重新启动时，您的计算机将直接进入安全模式^{(Safe Mode)}。

您现在可以在安全模式下工作。

在退出之前，请记住^{(remember to)}打开msconfig并取消选中Safe Boot复选框，单击Apply/OK，然后单击Restart，这样在重新启动时，您的计算机将不会再次以安全模式启动，而是会启动到您的桌面。

4]使用命令提示符^{(Command Prompt)}以安全模式^{(Safe Mode)}启动^(Boot)

您可以在提升的命令提示符下执行以下命令，然后重新启动，以将Windows 10引导至安全模式^(Mode)。

bcdedit /set {current} safeboot minimal

通过网络启动进入安全模式

bcdedit /set {current} safeboot network

^(Boot)使用命令提示符^{(Command Prompt)}启动进入安全模式^{(Safe Mode)}

bcdedit /set {default} safeboot minimal bcdedit /set {default} safebootalternateshell yes

要退出安全模式，请使用：

bcdedit /deletevalue {current} safeboot

5]通过登录屏幕

• 到达登录或登录屏幕后，按住Shift键并单击电源^(Power)按钮，然后选择重新启动^(Restart)。
• 当您的 PC 重新启动时，单击Troubleshoot > Advanced Options > Startup Settings > Restart。
• 在重新启动时，选择选项 4 以启动到安全模式^(Mode)。

6]启用F8键并使用它

您需要先启用 F8 键，然后使用它启动进入安全模式^(Mode)，

7]从Windows恢复驱动器启动

您需要已经创建了 USB 恢复驱动器^{(created a USB recovery drive)}。

1. 现在重新启动计算机并启动到恢复驱动器
2. 根据您的首选语言选择键盘布局
3. 选择Troubleshoot > Advanced选项 >Startup Settings > Restart
4. 在重新启动时，选择选项 4 以启动到安全模式^(Mode)。

8]使用Windows安装媒体

将计算机引导至Windows 安装介质^{(Windows Installation Media)}

点击修复您的电脑

选择Troubleshoot > Advanced选项 >命令提示符^{(Command Prompt)}。

执行以下命令：

bcdedit /set {default} safeboot minimal

选择继续^{(Select Continue)}退出并启动进入安全模式^(Mode)。

Windows的F8 安全模式^{(F8 Safe Mode)}是否有效？

默认情况下，未启用之前帮助您以安全模式启动计算机的 F8 键。^(Mode)您必须先使用CMD使用此过程来启用它。然后，您将能够使用 F8 键以Windows 安全模式启动。^{(Windows Safe Mode)}

如何启动到Windows 恢复^{(Windows Recovery)}？

Windows 恢复环境( WinRE ) 是与^(WinRE)Windows 10一起安装在单独分区中的配套操作系统。

1. 您可以使用恢复媒体^{(recovery media)} 启动到 Windows RE。
2. 在提升的命令提示符下执行 reagentc /boottore 并重新启动设备以启动到WinRE。
3. 在提升的命令提示符下执行 shutdown /r /o 并重新启动设备以启动到WinRE而不是Windows 10。

另请阅读^{(Also read)}：

1. 在 Windows中无法以安全模式启动。
2. 如何将安全模式添加到 Windows 中的启动菜单选项。
3. 如何在 Windows 中以安全模式直接重启^{(How to directly reboot in Safe Mode in Windows)}。
4. PC 卡住，无法退出安全模式^{(PC is stuck and cannot exit Safe Mode)}。

How to boot or start Windows in Safe Mode - Windows 11/10

Windows 11/10 Safe Mode loads the operating system with a minimal set of system files and device drivers – just enough to boot the Windows OS. In Safe Mode, the startup programs, add-ons, etc. settings, do not run. We usually boot into Safe Mode, when we need to troubleshoot issues. This post will show you how to enable and start or boot Windows 11/10 in Safe Mode. There may be other ways, but we will cover only 2 of the most convenient ways.

How to start Windows 11/10 in Safe Mode

There are three easy ways you can start Windows 11/10 in Safe Mode:

1. Press Shift and then click on Restart
2. Open Recovery section in Update & Settings and click on Restart now.
3. Use MSConfig or System Configuration Utility and select the Safe boot and Minimal options setting and restart.
4. Boot in Safe Mode using Command Prompt
5. Via the Logon screen
6. Enable F8 key and use it
7. Boot from Windows Recovery Drive
8. Using Windows Installation Media

Let us take a look at them in detail.

1] Press Shift and then click on Restart

The easiest way to boot Windows 10 into Safe Mode, would be to press Shift and then click on Restart. This will reboot your Windows 10 computer into Advanced Startup Options.

2] Open Recovery section and click on Restart now

In Windows 11, open Settings > System > Recovery > Advanced startup and click on Restart now.

In Windows 10, open the Settings app > Update & Security > Recovery. Under Advanced startup, click on Restart now.

When you follow any of the two methods mentioned, your Windows computer will restart, and you will see the following screen.

Click on Troubleshoot to proceed.

Now follow the steps laid down in Advanced Startup options in Windows.

It will take you through the entire process starting with – Troubleshoot > Advanced Options > Startup Settings > Restart > Press No 4 key.

If you have followed the procedure correctly, you will finally reach Startup Settings screen, from where you will be able to enable Safe Mode.

Press the ‘4’ key, and your computer will restart and enter Safe Mode. To reboot in Safe Mode with Networking, press ‘5’ key. To reboot in Safe Mode with Command Prompt, press the ‘6’ key.

You will see a black desktop with a Safe Mode watermark in the bottom left and right sides.

Read: How to Enable F8 Key to Boot into Safe Mode on Windows 11/10.

3] Use MSConfig or System Configuration Utility

The other simple way, of course, is by using the built-in System Configuration Utility. From the Win+X Menu, open Run box, type msconfig and hit Enter.

Under the Boot tab, check the Safe boot and Minimal options. Click Apply/OK and exit. On a restart, your computer will enter Safe Mode directly.

You can now work in the Safe Mode.

Before you exit, remember to open msconfig and uncheck the Safe Boot check box, click Apply/OK and then on Restart, so that on reboot, your computer will not again boot in safe mode – but instead will boot to your desktop.

4] Boot in Safe Mode using Command Prompt

You can execute the following command in an elevated command prompt, and restart, to boot Windows 10 into Safe Mode.

bcdedit /set {current} safeboot minimal

Boot into Safe Mode with Networking

bcdedit /set {current} safeboot network

Boot into Safe Mode with Command Prompt

bcdedit /set {default} safeboot minimal bcdedit /set {default} safebootalternateshell yes

To exit Safe Mode, use:

bcdedit /deletevalue {current} safeboot

5] Via the Logon screen

• Once you reach the logon or sign-in screen, hold the Shift key down and click on the Power button and then select Restart.
• When your PC restarts, click on Troubleshoot > Advanced Options > Startup Settings > Restart.
• On the restart, select option 4 to boot into Safe Mode.

6] Enable F8 key and use it

You need to enable the F8 key first and then use it to boot into Safe Mode,

7] Boot from Windows Recovery Drive

You need to have already created a USB recovery drive.

1. Now reboot the computer and boot to the recovery drive
2. Select your keyboard layout based on your preferred language
3. Select Troubleshoot > Advanced options > Startup Settings > Restart
4. On the restart, select option 4 to boot into Safe Mode.

8] Using Windows Installation Media

Boot the computer to the Windows Installation Media

Click on Repair Your Computer

Select Troubleshoot > Advanced options > Command Prompt.

Execute the following command:

bcdedit /set {default} safeboot minimal

Select Continue to exit and boot into Safe Mode.

Is F8 Safe Mode for Windows working?

The F8 key that helped you earlier to boot the computer in Safe Mode is not enabled by default. You have to use this procedure using CMD to enable it first. Then you will be able to boot in Windows Safe Mode using the F8 key.

How do I boot into Windows Recovery?

The Windows Recovery Environment (WinRE) is a companion operating system installed alongside Windows 10, in a separate partition.

1. You can use recovery media to boot into Windows RE.
2. Execute reagentc /boottore in an elevated command prompt and restart the device to boot into WinRE.
3. Execute shutdown /r /o in an elevated command prompt and restart the device to boot into WinRE instead of Windows 10.

Also read:

1. Cannot boot in Safe Mode in Windows.
2. How to add Safe Mode to Boot Menu options in Windows.
3. How to directly reboot in Safe Mode in Windows.
4. PC is stuck and cannot exit Safe Mode.

Related posts

• 您可以在Windows 10 Safe Mode安装Windows Updates吗？

• 如何在Windows 10 Safe Mode中Install & Uninstall programs

• 如何在Windows 10执行Clean Boot

• PC stuck在Windows 11/10中无法退出Safe Mode

• 如何在Windows 10中直接重启安全Mode

• 如何在Windows 10上从Windows XP Mode VM恢复数据

• 如何在Windows 10上禁用或启用Google Chrome中的暗Mode

• 如何在Safe Mode中Boot Mac

• Improve performance在Windows 10 Task Manager中使用Eco Mode

• 如何在Windows 10上启动和使用Google Chrome Application Mode

• 如何启动Word，Excel，PowerPoint，Outlook在Safe Mode

• Windows 10 Dark Mode Font color仍然是Black，使其无法读

• 如何在Windows 11/10启用Developer Mode

• 如何在Windows 11/10上追踪WorkGroup Mode的User Activity

• 如何关闭或打开Airplane Mode在Windows 10

• Windows 10不Sleep | Sleep Mode不Windows 10工作

• 如何在Windows 10启用或Disable Tablet Mode

• 如何在Windows 10中禁用或启用读者Mode在Chrome中

• 如何在Android上关闭Safe Mode

• 5 Ways以Safe Mode启动您的电脑