如何在 Windows 10 中更改 IP 地址： ^{(How to Change IP address in Windows 10: )} IP 地址是每个设备在任何特定计算机网络上拥有的唯一数字标签。此地址用于在网络上的设备之间发送和接收消息。

动态 IP 地址由DHCP 服务器^{(DHCP server)}（您的路由器）提供。每次连接到网络时，设备的动态 IP 地址都会更改。另一方面，静态 IP 地址由您的ISP提供，并且在^(ISP)ISP或管理员手动更改之前保持不变。与拥有静态 IP 地址相比，拥有动态 IP 地址可以降低被黑客入侵的风险。

在本地网络上，您可能希望进行资源共享或端口转发。现在，这两个都需要静态 IP 地址才能工作。但是，路由器分配的IP 地址^{(IP address)}本质上是动态的，每次重启设备时都会发生变化。在这种情况下，您需要为您的设备手动配置静态 IP 地址。有很多方法可以做到这一点。让我们检查一下。

如何在 Windows 10 中更改 IP 地址^{(How to Change IP address in Windows 10)}

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：使用控制面板更改 IP 地址^{(Method 1: USE CONTROL PANEL TO CHANGE IP ADDRESS)}

1.使用任务栏上windows图标旁边的搜索栏，搜索控制面板。^{(control panel.)}

2.打开控制面板。

3.单击“网络和Internet^{(Network and Internet)} ”，然后单击“网络和共享中心^{(Network and sharing center)}”。

4.单击窗口左侧的“更改适配器设置”。^{(Change adapter settings)}

5.网络连接窗口将打开。

6.右键单击相关的网络适配器，然后单击属性。^{(properties.)}

7.在网络选项卡中，选择“ Internet Protocol Version 4 (TCP/IPv4) ”。

8.单击属性^(Properties)。

9.在IPv4 属性^{(IPv4 Properties)}窗口中，选择“使用以下 IP 地址^{(Use the following IP address)}”单选按钮。

10.输入您要使用的 IP 地址。

11.输入子网掩码。对于您在家中使用的本地网络，子网掩码为255.255.255.0。

12.在默认网关中，输入路由器的 IP 地址。^{(enter your router’s IP address.)}

13.在首选 DNS^{(Preferred DNS)}服务器中，输入提供DNS解析的服务器的 IP 地址。它通常是您的路由器的 IP 地址。

14.您还可以添加备用 DNS 服务器^{(add an alternate DNS server)}以连接到，以防您的设备无法访问首选DNS服务器。

15.单击确定以应用您的设置。

16.关闭窗口。

17.尝试浏览一个网站，看看它是否有效。

这是您在 Windows 10 中轻松更改 IP 地址的方法，^{(Change IP Address in Windows 10,)}但如果此方法对您不起作用，请务必尝试下一个。

方法 2：使用命令提示符 ^{(Method 2: USE COMMAND PROMPT )}更改 IP 地址^{(TO CHANGE IP ADDRESS)}

1.按 Windows 键 + X 然后选择命令提示符（管理员）^{( Command Prompt(Admin))}。

2.要查看您当前的配置，请键入 ipconfig /all并按 Enter。

3.您将能够看到您的网络适配器配置的详细信息。

4.现在，输入：

netsh interface ip set address name=”yourNetworkAdapter” static 10.20.30.40 255.255.255.0 2.4.6.8

注意：^{(Note: )}这三个地址分别是您要分配的设备静态 IP 地址、子网掩码和默认逃生地址。

5.按回车键，这将为您的设备分配一个静态 IP 地址。^{( assign a static IP address to your device.)}

6.要设置您的 DNS 服务器地址^{(set your DNS server address)}，请键入以下命令并按Enter：

netsh interface ip set dns name=”yourNetworkAdapter” static 10.20.30.1

注意：^{(Note: )}最后一个地址是您的DNS服务器的地址。

7.要添加备用DNS地址，请键入

netsh interface ip add dns name=”alternateServer” 8.8.8.8 index=2

注意：^{(Note: )}此地址将是备用DNS服务器地址。

8.尝试浏览一个网站，看看它是否有效。

方法三：使用 POWERSHELL ^{(Method 3: USE POWERSHELL )}更改 IP 地址^{(TO CHANGE IP ADDRESS)}

1.按Windows Key + S调出搜索^(Search)，然后键入PowerShell。

2.右键单击Windows PowerShell快捷方式并选择“以管理员身份运行^{(Run as administrator)}”。

3.要查看您当前的 IP 配置，请键入Get-NetIPConfiguration并按 Enter。

4.记下以下细节：

InterfaceIndex
IPv4Address
IPv4DefaultGateway
DNSServer

5.要设置静态IP地址，运行命令：

New-NetIPAddress -InterfaceIndex 13 -IPAddress 10.20.30.40 –PrefixLength 24 -DefaultGateway 2.4.6.8

注意：^(Note:)在这里，将InterfaceIndex 编号和 DefaultGateway^{(InterfaceIndex number and DefaultGateway)}替换为您在前面步骤中记下的那些，并将IPAddress替换为您要分配的那个。对于子网掩码 255.255.255.0，PrefixLength为 24，如果需要，可以将其替换为正确的子网掩码位数。

6.要设置DNS服务器地址，运行命令：

Set-DnsClientServerAddress -InterfaceIndex 3 -ServerAddresses 10.11.12.13

或者，如果您想添加另一个备用DNS地址，请使用以下命令：

Set-DnsClientServerAddress -InterfaceIndex 3 –ServerAddresses 10.11.12.13, 8.8.8.8

注意：^(Note:)使用相关的InterfaceIndex和DNS服务器地址。

7.这是您可以在 Windows 10 中轻松更改 IP 地址的方法，^{(Change IP Address in Windows 10,)}但如果此方法不适合您，请务必尝试下一个。

方法 4：^{(Method 4: )}在 WINDOWS 10 ^{(CHANGE IP ADDRESS IN WINDOWS 10 )}设置中更改 IP 地址^(SETTINGS)

注意：^{(Note: )}此方法仅适用于无线适配器。

1.按Windows Key + I 打开设置^(Settings)，然后单击“网络和 Internet^{(Network & Internet)} ”。

2.单击左侧窗格中的Wi-Fi并^(Wi-Fi)选择所需的连接。^{(select your required connection.)}

3.向下滚动并单击IP 设置下的编辑按钮^{(Edit button under IP settings)}。

4.从下拉菜单中选择“手动”并打开^(Manual)IPv4开关。

5.设置IP地址、子网^(Subnet)前缀长度（子网掩码255.255.255.0为24）、网关^(Gateway)、首选DNS^{(Preferred DNS)}、备用DNS^{(Alternate DNS)}并点击保存按钮。^{( Save button.)}

使用这些方法，您可以轻松地为您的计算机设置静态 IP 地址。

受到推崇的：^{(Recommended:)}

• 如何在 Windows 10 中设置 Gmail^{(How to Setup Gmail in Windows 10)}
• 在 Windows 10 中添加打印机 [指南]^{(Add a Printer in Windows 10 [GUIDE])}
• Microsoft Word 已停止工作 [已解决]^{(Microsoft Word has Stopped Working [SOLVED])}
• 如何禁用谷歌 Chrome PDF 查看器^{(How to Disable Google Chrome PDF Viewer)}

我希望上述步骤能够帮助您在 Windows 10 中更改 IP 地址，^{(Change IP address in Windows 10)}但如果您对本指南仍有任何疑问，请随时在评论部分提出。

How to Change IP address in Windows 10

How to Change IP address in Windows 10: IP address is the unique numerical label each device possesses on any particular computer network. This address is used to send and receive messages between the devices on a network.

The dynamic IP address is provided by the DHCP server (your router). A device’s dynamic IP address changes every time it connects to the network. The static IP address, on the other hand, is provided by your ISP and remains the same until it manually changes by the ISP or the administrator. Having dynamic IP addresses reduces the risk of being hacked than having static IP addresses.

On a local network, you might want to have resource sharing or port forwarding. Now, both of these require a static IP address to work. However, the IP address assigned by your router is dynamic in nature and will change every time you restart the device. In such a situation, you will need to manually configure a static IP address for your devices. There are many ways to do it. Let’s check them out.

How to Change IP address in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: USE CONTROL PANEL TO CHANGE IP ADDRESS

1.Use the search field beside the windows icon on the taskbar and search for the control panel.

2.Open control panel.

3.Click on ‘Network and Internet’ and then on ‘Network and sharing center’.

4.Click on ‘Change adapter settings’ on the left side of the window.

5.Network connection windows will open.

6.Right-click on the relevant network adapter and click on properties.

7.In the networking tab, select ‘Internet Protocol Version 4 (TCP/IPv4)’.

8.Click on Properties.

9.In the IPv4 Properties window, select the ‘Use the following IP address’ radio button.

10.Enter the IP address you want to use.

11.Enter the subnet mask. For a local network that you use at your home, subnet mask would be 255.255.255.0.

12.In the Default gateway, enter your router’s IP address.

13.In the Preferred DNS server, enter the IP address of the server which provides DNS resolutions. It is usually your router’s IP address.

14.You can also add an alternate DNS server to connect to in case your device can’t reach the preferred DNS server.

15.Click on OK to apply your settings.

16.Close the window.

17.Try navigating a website to see if it works.

This how you can easily Change IP Address in Windows 10, but if this method doesn’t work for you then make sure to try the next one.

Method 2: USE COMMAND PROMPT TO CHANGE IP ADDRESS

1.Press Windows Key + X then select Command Prompt(Admin).

2.To see your current configurations, type ipconfig /all and hit Enter.

3.You will be able to see the details of your network adapter configurations.

4.Now, type:

netsh interface ip set address name=”yourNetworkAdapter” static 10.20.30.40 255.255.255.0 2.4.6.8

Note: These three addresses being your device’s static IP address you want to assign, subnet mask, and default getaway address, respectively.

5.Press enter and this will assign a static IP address to your device.

6.To set your DNS server address type the following command and hit Enter:

netsh interface ip set dns name=”yourNetworkAdapter” static 10.20.30.1

Note: The last address being that of your DNS server.

7.To add an alternate DNS address, type

netsh interface ip add dns name=”alternateServer” 8.8.8.8 index=2

Note: This address will be the alternate DNS server address.

8.Try navigating a website to see if it works.

Method 3: USE POWERSHELL TO CHANGE IP ADDRESS

1.Press Windows Key + S to bring up the Search then type PowerShell.

2.Right-click on Windows PowerShell shortcut and select ‘Run as administrator’.

3.To see your current IP configurations, type Get-NetIPConfiguration and hit Enter.

4.Note down the following details:

InterfaceIndex
IPv4Address
IPv4DefaultGateway
DNSServer

5.To set a static IP address, run the command:

New-NetIPAddress -InterfaceIndex 13 -IPAddress 10.20.30.40 –PrefixLength 24 -DefaultGateway 2.4.6.8

Note: Here, replace InterfaceIndex number and DefaultGateway with the those you noted down in previous steps and IPAddress with the one you want to assign. For subnet mask 255.255.255.0, PrefixLength is 24, you can replace it if you require to with correct bit number for subnet mask.

6.To set DNS server address, run the command:

Set-DnsClientServerAddress -InterfaceIndex 3 -ServerAddresses 10.11.12.13

Or, if you want to add another alternate DNS address then use the command:

Set-DnsClientServerAddress -InterfaceIndex 3 –ServerAddresses 10.11.12.13, 8.8.8.8

Note: Use the relevant InterfaceIndex and DNS server addresses.

7.This how you can easily Change IP Address in Windows 10, but if this method doesn’t work for you then make sure to try the next one.

Method 4: CHANGE IP ADDRESS IN WINDOWS 10 SETTINGS

Note: This method works only for wireless adapters.

1.Press Windows Key + I to open Settings then click on ‘Network & Internet’.

2.Click on Wi-Fi from the left pane and select your required connection.

3.Scroll down and click on Edit button under IP settings.

4.Select ‘Manual’ from the drop-down menu and toggle on the IPv4 switch.

5.Set IP address, Subnet prefix length (24 for subnet mask 255.255.255.0), Gateway, Preferred DNS, Alternate DNS and click on Save button.

Using these methods, you can easily set a static IP address for your computer.

Recommended:

• How to Setup Gmail in Windows 10
• Add a Printer in Windows 10 [GUIDE]
• Microsoft Word has Stopped Working [SOLVED]
• How to Disable Google Chrome PDF Viewer

I hope the above steps were able to help you Change IP address in Windows 10 but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

Related posts

• 禁用Windows 10中的夹夹Zoom Feature

• 在Windows 10中创建Full System Image Backup [终极指南]

• 如何在Windows 10中创建System Image Backup

• 如何在Windows 10中删除Volume or Drive Partition

• 如何在Windows 10中禁用粘滞Corners

• Windows 10中的Rename User Profile Folder

• 在Windows 10 Lock Screen上启用或禁用Cortana

• 如何在Windows 10中Fix Corrupted Registry

• 在Windows 10中使用Diskpart Clean Command清洁Disk

• 如何在Windows 10启用有源Directory

• 在Windows 10启用或禁用Caps Lock Key

• Windows 10 User Find Security Identifier（SID）

• 如何在Windows 10上共享Setup Network Files

• 3 Ways至Windows 10中的Increase Dedicated VRAM

• Windows 10中的Fix Black Desktop Background

• Windows 10中的Defer Feature and Quality Updates

• Windows 10缺少Fix VCRUNTIME140.dll

• 如何禁用Windows 10 Firewall

• Windows 10中的Fix Task Host Window Prevents Shut Down

• 在Windows 10中更改Operating Systems的Time至Display List Startup