安全保护保留^{(Safeguard Hold )}（ 也称为兼容性保留或更新阻止）是指Microsoft在硬件、软件或设置存在已知兼容性问题时阻止为设备提供新的Windows 10 功能更新。^{(Feature Update)}在这篇文章中，我们将向您展示如何在Windows 10上轻松禁用功能更新的^{(Feature Updates)}Safeguard Hold。

Safeguard保留旨在防止Windows 10中的严重问题，例如BSOD 崩溃^{(BSOD crashes)}、性能问题^{(Performance issues)}、设备无法正常工作或一般系统不稳定。

注意^(Caution)：选择退出保护保留可能会使设备面临已知性能问题的风险。强烈建议您在选择退出之前完成强大的测试以确保影响是可以接受的。

禁用功能更新的保护措施^{(Feature Updates)}

在应用2020 年 10 月补丁星期二更新（不要与Windows 10 版本 20H2^{(Windows 10 version 20H2)}混淆）后，即使您的设备还没有完全准备好进行功能更新，您最终也可以绕过升级块。

您可以通过以下两种方式之一禁用或绕过Windows 10上功能更新的保护保留；

1. 本地组策略编辑器
2. 注册表编辑器

我们来看看这两种方法的描述。

1]通过本地组策略编辑器^{(Local Group Policy Editor)}禁用安全保护

请执行下列操作：

1. 按Windows key + R调用“运行”对话框。
2. 在 Run 对话框中键入gpedit.msc并按 Enter打开 Group Policy Editor^{(open Group Policy Editor)}。
3. 在本地组策略编辑器^{(Local Group Policy Editor)}中，使用左窗格导航到以下路径：
4. Computer Configuration > Administrative Templates > Windows Components > Windows Update > Windows Update于企业的 Windows 更新^(Business)
5. 在右侧窗格中，双击禁用功能更新保护^{(Disable safeguards for Feature Updates)} 以编辑其属性。
6. 在属性窗口中，将单选按钮设置为Enabled。
7. 单击应用^(Apply)>确定^(OK)以保存更改。

Enable this setting when Feature Updates should be deployed to devices without blocking on any safeguard holds.?Safeguard holds are known compatibility issues that block the upgrade from being deployed to affected devices until the issue is resolved.?Enabling this policy can allow an organization to deploy the Feature Update to devices for testing, or to deploy the Feature Update without blocking on safeguard holds.

Windows 10 家庭版用户可以添加本地组策略编辑器^{(add the Local Group Policy Editor)}，然后执行上面概述的过程，或者他们可以尝试下面的注册表^(Registry)方法。

2]通过注册表编辑器^{(Registry Editor)}禁用安全保护

由于这是注册表操作，建议您备份注册表^{(back up the registry)} 或 创建系统还原点 作为必要的预防措施。完成后，您可以执行以下操作：

• 按 Windows key + R 调用“运行”对话框。
• 在“运行”对话框中，键入 notepad 并按 Enter 键以打开记事本。
• 将以下语法复制并粘贴到文本编辑器中。

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate]
"DisableWUfBSafeguards"=dword:00000001

• 现在，单击菜单中的 文件^(File) 选项，然后选择 另存为^{(Save As)} 按钮。
• 选择要保存文件的位置（最好是桌面）。
• 输入带有 .reg 扩展名的名称（例如 Disable_SafeguardHold.reg）。
•  从 保存类型^{(Save as type)} 下拉列表中选择 所有文件。^{(All Files)}
• 双击^{(Double-click)}保存的.reg文件将其合并。
• 如果出现提示，请单击 Run > Yes  ( UAC ) >  Yes > OK 以批准合并。
• 您现在可以根据需要删除.reg文件。
• 重新启动您的设备。

这就是如何在Windows 10上禁用^{(Windows 10)}功能更新^{(Feature Updates)}的保护保留！

设备安装新的Windows 10版本后，禁用功能更新保护^{(Disable safeguards for Feature Updates)}组策略将恢复为未配置^{(Not configured)}，即使之前已启用。这是为了确保管理员有意识地禁用 Microsoft 针对每个新功能更新的已知问题的默认保护。

阅读^(READ)：如何部署使用 Safeguard Group 策略配置的功能更新。^{(How to deploy Features Updates configured with Safeguard Group Policies.)}

How to disable Safeguards for Feature Updates on Windows 10

A Safeguard Hold – also known as a compatibility hold or update block – is when Microsoft prevents devices from being offered a new Windows 10 Feature Update if there are known compatibility issues with hardware, software, or settings. In this post, we will show you how to easily disable Safeguard Hold for Feature Updates on Windows 10.

Safeguard holds are intended to prevent severe problems in Windows 10, such as BSOD crashes, Performance issues, devices not working, or general system instability.

Caution: Opting out of a safeguard hold can put devices at risk from known performance issues. It’s strongly recommended that you complete robust testing to ensure the impact is acceptable before opting out.

Disable Safeguards for Feature Updates

After applying October 2020 Patch Tuesday updates (not to be confused with Windows 10 version 20H2), you can finally bypass upgrade blocks even when your device isn’t quite ready for the feature update.

You can disable or bypass safeguard hold for feature updates on Windows 10 in either of two ways;

1. Local Group Policy Editor
2. Registry Editor

Let’s have a look at the description of these two methods.

1] Disable Safeguards via Local Group Policy Editor

Do the following:

1. Press Windows key + R to invoke the Run dialog.
2. In the Run dialog box type gpedit.msc and hit Enter to open Group Policy Editor.
3. Inside the Local Group Policy Editor, use the left pane to navigate to the path below:
4. Computer Configuration > Administrative Templates > Windows Components > Windows Update > Windows Update for Business
5. On the right pane, double-click on Disable safeguards for Feature Updates to edit its properties.
6. In the properties window, set the radio button to Enabled.
7. Click Apply > OK to save the changes.

Enable this setting when Feature Updates should be deployed to devices without blocking on any safeguard holds.?Safeguard holds are known compatibility issues that block the upgrade from being deployed to affected devices until the issue is resolved.?Enabling this policy can allow an organization to deploy the Feature Update to devices for testing, or to deploy the Feature Update without blocking on safeguard holds.

Windows 10 Home edition users can add the Local Group Policy Editor and then perform the procedure outlined above or they can try the Registry method below.

2] Disable Safeguards via Registry Editor

Since this is a registry operation, it is recommended that you back up the registry or create a system restore point as necessary precautionary measures. Once done, you can proceed as follows:

• Press Windows key + R to invoke the Run dialog.
• In the Run dialog box, type notepad and hit Enter to open Notepad.
• Copy and paste the syntax below into the text editor.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate]
"DisableWUfBSafeguards"=dword:00000001

• Now, click the File option from the menu and select Save As button.
• Choose a location (preferably desktop) where you want to save the file.
• Enter a name with .reg extension (eg; Disable_SafeguardHold.reg).
• Choose All Files from the Save as type drop-down list.
• Double-click the saved .reg file to merge it.
• If prompted, click on Run > Yes (UAC) > Yes > OK to approve the merge.
• You can now delete the .reg file if you like.
• Restart your device.

That’s it on how to disable safeguard hold for Feature Updates on Windows 10!

After a device installs a new Windows 10 version, the Disable safeguards for Feature Updates Group Policy will revert to Not configured even if it was previously enabled. This is to ensure the admin is consciously disabling Microsoft’s default protection from known issues for each new feature update.

READ: How to deploy Features Updates configured with Safeguard Group Policies.

Related posts

• Windows 10中的启用包是什么

• New特征Windows 10 version 20H2 October 2020 Update

• 解释Windows 10中的Modern Setup Host。它安全吗？

• 卸载Windows更新，而无需在Windows 10 Uninstall option

• Windows 10 Win Update Stop：禁用Windows Updates4

• 什么是Microsoft Update Health Tools我在Windows 10看到了？

• Windows 10 Download Media Feature Pack N version

• Windows 10 Block Driver Updates通过Windows Quality Update

• 禁用Windows 10中的夹夹Zoom Feature

• 在Windows 10中启用或禁用Shared Experiences Feature

• Fix Windows Update error 0x80070659

• 更改Windows Updates Delivery Optimization Cache Drive

• 无法在Windows 10上安装Windows Media Feature Pack

• Windows 10 Sound Research Corp SoftwareComponent Update

• Defer在Windows 10 V2004中取出更新选项; Use Group Policy

• Windows 10 Feature Update无法安装，Error 0x8007371b

• Windows 10中检测到的潜在Windows Update Database error

• 如何使用StopUpdates10阻止Windows 10上的更新

• 如何使用WAU Manager管理或停止Windows 10 Update

• Windows Update 不会安装更新？如何解决此问题