GDI+ Window preventing to shut down fix: 图形设备界面(Graphics Device Interface)和Windows 应用程序(Windows App)阻止您的计算机关闭。 Windows GDI+是提供二维矢量图形、图像和排版的Windows操作系统的一部分。(Windows)GDI+通过添加新功能和优化现有功能对Windows 图形设备接口(Windows Graphics Device Interface)( GDI )(早期版本的(GDI)Windows中包含的图形设备接口)进行了改进。有时GDI和Windows应用程序冲突会导致错误 GDI+ Window preventing to shut down.
What is GDI+?
GDI是在(GDI)Windows应用程序中提供所见即所得( WYSIWYG ) 功能的工具。GDI+ is an enhanced C++-based version of GDI.图形设备接口(Graphics Device Interface)( GDI )是Microsoft Windows应用程序编程接口和核心操作系统组件,负责表示图形对象并将它们传输到显示器和打印机等输出设备。
图形设备接口,例如GDI+,允许应用程序程序员在屏幕或打印机上显示信息,而不必关心特定显示设备的细节。应用程序程序员调用GDI+类提供的方法,然后这些方法对特定的设备驱动程序进行适当的调用。GDI+将应用程序与图形硬件隔离开来,
正是这种隔离让开发人员能够创建独立于设备的应用程序。
GDI+ 窗口防止关闭
方法 1:运行电源(Power)疑难解答来诊断和修复错误。
1.按Windows Key + R按钮打开运行(Run)对话框。
2.键入控制(Control)并按回车键打开控制面板(Control Panel)。
3.在搜索框中输入“疑难解答”(‘troubleshooter’)并选择“疑难解答”。(‘Troubleshooting.’)
4.现在点击系统和安全( System and Security)并选择电源(Power),然后按照屏幕上的说明进行操作。
5.重新启动(Reboot)以应用更改。
方法 2:执行系统文件检查(System File Check)( SFC )
1.按 Windows Key + Q 按钮打开超级按钮栏。
2.键入 cmd 并右键单击 cmd 选项并选择“以管理员身份运行”。(‘Run as Administrator.’)
3.键入sfc /scannow并回车。
4.重启。(Reboot.)
以上必须解决了您的 GDI 窗口问题,如果没有,则阻止关闭,( GDI Window preventing to shut down)然后继续下一个方法。
方法3:以干净启动方式启动计算机
您可以通过使用“干净启动”使用最少的驱动程序和启动程序来启动Windows 。在干净启动的帮助下,您可以消除软件冲突。
第1步:
1.按Windows Key + R按钮,然后键入“msconfig”并单击“确定”。
2.单击系统配置下的启动选项卡并取消选中(Boot tab)“安全启动”( ‘Safe Boot’)选项。
3.现在返回常规选项卡并确保选中“选择性启动” 。( ‘Selective startup’)
4.取消选中选择性启动下的“加载启动项”。(‘Load startup items)
5.选择服务(Service)选项卡并选中“隐藏所有 Microsoft 服务”框。( ‘Hide all Microsoft services.’)
6.现在单击“全部禁用”( ‘Disable all’)以禁用所有可能导致冲突的不必要服务。
7.在启动选项卡上,单击“打开任务管理器”。(‘Open Task Manager.’)
8.现在在启动选项卡( Startup tab)(在任务管理器内)禁用所有( disable all )启用的启动项。
9.单击确定,然后重新启动。(Restart.)
第 2 步:启用一半的服务
1.按 Windows Key + R button,然后键入“msconfig”并单击“确定”。
2.选择服务(Service)选项卡并选中“隐藏所有 Microsoft 服务”框。(‘Hide all Microsoft services.’)
3.现在选择服务列表( Service list)中的一半复选框并启用(enable)它们。
4.单击确定,然后重新启动。(Restart.)
步骤 3:确定问题是否返回
- 如果问题仍然存在,请重复步骤 1 和步骤 2。在步骤 2 中,只选择您在步骤 2 中最初选择的服务的一半。
- 如果问题没有出现,请重复第 1 步和第 2 步。在第 2 步中,只选择您在第 2 步中未选择的一半服务。重复这些步骤,直到选中所有复选框。
- 如果在“服务(Service)”列表中只选择了一项服务,而您仍然遇到问题,则选择的服务导致了问题。
- 转到第 6 步。如果没有服务导致此问题,则转到第 4 步。
第 4 步:启用一半的启动(Startup)项
如果没有启动项导致此问题,则Microsoft服务最有可能导致此问题。要确定哪个Microsoft服务重复步骤 1 和步骤 2,而不在任一步骤中隐藏所有Microsoft服务。
步骤 5:确定问题是否返回
- 如果问题仍然存在,请重复第 1 步和第 4 步。在第 4 步中,仅选择您最初在“ 启动项(Startup Item)”列表中选择的一半服务。
- 如果问题没有出现,请重复第 1 步和第 4 步。在第 4 步中,仅选择您在“启动项(Startup Item)”列表中未选择的一半服务。重复(Repeat)这些步骤,直到您选择了所有复选框。
- 如果在“启动项(Startup Item)”列表中仅选择了一个启动项,并且您仍然遇到问题,则选择的启动项导致了问题。转到第 6 步。
- 如果没有启动项导致此问题,则Microsoft服务最有可能导致此问题。要确定哪个Microsoft服务重复步骤 1 和步骤 2,而不在任一步骤中隐藏所有Microsoft服务。
第 6 步:解决问题。
现在您可能已经确定是哪个启动项或服务导致了问题,请联系程序制造商或访问他们的论坛并确定问题是否可以解决。或者您可以运行系统配置(System Configuration)实用程序并禁用该服务或启动项。
第 7 步:按照以下步骤再次启动到正常启动:
1.按Windows key + R按钮并键入“msconfig”,然后单击“确定”。
2.在常规选项卡上,选择正常启动选项( Normal Startup option),然后单击确定。
3.当提示您重新启动计算机时,单击重新启动。( click Restart.)
你可能也会喜欢:
最后,您已经修复 GDI+ Window preventing to shut down problem,现在您可以开始了。但是,如果您对这篇文章仍有任何疑问,请随时在评论中提问。
GDI+ Window preventing to shut down fix
GDI+ Window preventing to shut down fix: Graphics Device Interface and Windows App are preventing your computer from shut down. Windows GDI+ is the portion of the Windows operating system that provides two-dimensional vector graphics, imaging, and typography. GDI+ improves on Windows Graphics Device Interface (GDI) (the graphics device interface included with earlier versions of Windows) by adding new features and by optimizing existing features. And sometime the GDI and Windows app conflict giving the error GDI+ Window preventing to shut down.
What is GDI+?
GDI was the tool by which what you see is what you get (WYSIWYG) capability was provided in Windows applications. GDI+ is an enhanced C++-based version of GDI. The Graphics Device Interface (GDI) is a Microsoft Windows application programming interface and core operating system component responsible for representing graphical objects and transmitting them to output devices such as monitors and printers.
A graphics device interface, such as GDI+, allows application programmers to display information on a screen or printer without having to be concerned about the details of a particular display device. The application programmer makes calls to methods provided by GDI+ classes and those methods in turn make the appropriate calls to specific device drivers. GDI+ insulates the application from the graphics hardware,
and it is this insulation that allows developers to create device-independent applications.
GDI+ Window preventing to shut down
Method 1: Run the Power troubleshooter To diagnose and fix the error.
1.Press Windows Key + R button to open the Run dialogue box.
2.Type Control and hit enter to open Control Panel.
3.In the search box type ‘troubleshooter’ and select ‘Troubleshooting.’
4.Now click on System and Security and select Power, then follow on screen instruction.
5.Reboot to apply the changes.
Method 2: Perform System File Check (SFC)
1.Press Windows Key + Q button to open Charms Bar.
2.Type cmd and right click on cmd option and select ‘Run as Administrator.’
3.Type sfc /scannow and hit enter.
4.Reboot.
The above must have fixed your problem with GDI Window preventing to shut down if not then continue with next method.
Method 3: Start the computer in clean boot
You can start Windows by using a minimal set of drivers and startup programs by using “clean boot.” With the help of clean boot you can eliminate software conflicts.
Step 1:
1.Press the Windows Key + R button, then type ‘msconfig’ and click OK.
2.Click Boot tab under system configuration and uncheck ‘Safe Boot’ option.
3.Now go back to the general tab and make sure ‘Selective startup’ is checked.
4.Uncheck ‘Load startup items‘ under selective startup.
5.Select Service tab and check the box ‘Hide all Microsoft services.’
6.Now click ‘Disable all’to disable all the unnecessary services which might cause conflict.
7.On Startup tab, click ‘Open Task Manager.’
8.Now in Startup tab (Inside Task Manager) disable all the startup items which are enabled.
9.Click OK and then Restart.
Step 2: Enable half of the services
1.Press the Windows Key + R button, then type ‘msconfig’ and click OK.
2.Select Service tab and check the box ‘Hide all Microsoft services.’
3.Now select half of the check boxes in the Service list and enable them.
4.Click OK and then Restart.
Step 3: Determine whether the problem returns
- If the problem still occurs, repeat step 1 and step 2. In step 2, only select half of the services that you originally selected in step 2.
- If the problem does not occur, repeat step 1 and step 2. In step 2, only select half of the services that you didn’t selected in step 2.Repeat these steps until you have selected all the check boxes.
- If only one service is selected in the Service list and you still experience the problem, then the selected service is causing the problem.
- Go to step 6. If no service causes this problem then go to step 4.
Step 4: Enable half of the Startup items
If no startup item causes this problem then Microsoft services are most likely to cause the problem. To determine which Microsoft service repeat step 1 and step 2 without hiding all Microsoft services in either step.
Step 5: Determine whether the problem returns
- If the problem still occurs, repeat step 1 and step 4. In step 4, only select half of the services that you originally selected in the Startup Item list.
- If the problem does not occur, repeat step 1 and step 4. In step 4, only select half of the services that you didn’t selected in the Startup Item list. Repeat these steps until you have selected all the check boxes.
- If only one startup item is selected in the Startup Item list and you still experience the problem, then the selected start item is causing the problem. Go to step 6.
- If no startup item causes this problem then Microsoft services are most likely to cause the problem. To determine which Microsoft service repeat step 1 and step 2 without hiding all Microsoft services in either step.
Step 6: Resolve the problem.
Now you may have determined which startup item or service is causing the problem, contact the program manufacturer or go their forum and determine whether the problem can be resolved. Or you can run the System Configuration utility and disable that service or startup item.
Step 7: Follow these steps to again boot to normal startup:
1.Press the Windows key + R button and type ‘msconfig’ and click OK.
2.On the General tab, select the Normal Startup option, and then click OK.
3.When you are prompted to restart the computer, click Restart.
You may also like:
Finally, you have fixed GDI+ Window preventing to shut down problem, now you are good to go. But if you still have any question regarding this post feel free to ask them in comments.