在 Windows 10 中启用详细或高度详细的状态消息： ^{(Enable Verbose or Highly Detailed Status Messages in Windows 10: )}Windows提供显示详细信息状态消息，准确显示系统启动、关闭、登录和注销操作时发生的情况。这些被称为详细状态消息，但默认情况下它们被Windows禁用。因此，不要浪费任何时间，让我们在下面列出的教程的帮助下了解如何在Windows 10中启用^{(Windows 10)}详细^(Verbose)或高度详细的状态消息。^{(Highly Detailed Status Messages)}

在 Windows 10 中启用详细或高度详细的状态消息

在Windows 10中启用详细^(Verbose)或高度详细的状态消息^{(Highly Detailed Status Messages)}

确保创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：在注册表编辑器中启用详细或高度详细的状态消息^{(Method 1: Enable Verbose or Highly Detailed Status Messages in Registry Editor)}

1.按 Windows 键 + R 然后键入regedit并按 Enter 打开注册表编辑器。^{(Registry Editor.)}

运行命令 regedit

2.导航到以下注册表项：

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System

3.右键单击系统^{( System)}，然后选择New > DWORD (32-bit) Value.

右键单击系统，然后选择新建，然后单击 DWORD（32 位）值

注意：^(Note:)即使您使用的是 64 位Windows，您仍然需要创建 32 位值DWORD。

4.将此新创建的 DWORD 命名为VerboseStatus并按 Enter。

将此新创建的 DWORD 命名为 VerboseStatus 并按 Enter

5.现在双击VerboseStatus DWORD并将其值更改为：

启用详细：1^{(To Enable Verbose: 1)}
禁用详细：0^{(To Disable Verbose: 0)}

要启用详细，请将 VerboseStatus DWORD 的值设置为 1

6.单击确定并关闭注册表编辑器。

7.重新启动您的 PC 以保存更改。

方法 2：在组策略编辑器中启用详细或高度详细的状态消息^{(Method 2: Enable Verbose or Highly Detailed Status Messages in Group Policy Editor)}

1.按 Windows 键 + R 然后键入gpedit.msc并按 Enter。

gpedit.msc 正在运行

2.导航到以下路径：

Computer Configuration > Administrative Templates > System

3.确保选择系统^(System)，然后在右侧窗格中双击显示高度详细的状态消息策略。^{(Display highly detailed status messages policy.)}

双击显示高度详细的状态消息策略

4.根据以下情况更改上述策略的值：

启用高度详细的状态消息：启用^{(To Enable Highly Detailed Status Messages: Enabled)}
禁用高度详细的状态消息：未配置或禁用^{(To Disable Highly Detailed Status Messages: Not Configured or Disabled)}

要启用高度详细的状态消息，请将策略设置为已启用

注意：如果打开了“^(Note:) Remove Boot / Shutdown / Logon / Logoff状态消息”设置，Windows会忽略此设置。

5.完成上述设置后，单击应用，然后单击确定。^{(click Apply followed by OK.)}

6.完成后，关闭组策略编辑器^{(Group Policy Editor)}并重新启动您的 PC。

受到推崇的：^{(Recommended:)}

允许或阻止 Windows 10 主题更改桌面图标^{(Allow or Prevent Windows 10 Themes to Change Desktop Icons)}
从 Windows 10 的桌面中删除 Internet Explorer 图标^{(Remove the Internet Explorer icon from Desktop in Windows 10)}
防止用户在 Windows 10 中更改桌面图标^{(Prevent User From Changing Desktop Icons in Windows 10)}
在 Windows 10 中禁用桌面壁纸 JPEG 质量降低^{(Disable Desktop Wallpaper JPEG Quality Reduction in Windows 10)}

就是这样，您已经成功学习了如何在 Windows 10 中启用详细或高度详细的状态消息，^{(How to Enable Verbose or Highly Detailed Status Messages in Windows 10)}但如果您对本教程仍有任何疑问，请随时在评论部分询问。

Enable Verbose or Highly Detailed Status Messages in Windows 10

Enable Verbose or Highly Detailed Status Messages in Windows 10: Windows offers to display detailed information status messages which shows exactly whats going on when the system starts up, shutdown, logon, and logoff operations. These are referred as to as verbose status message but by default they are disabled by Windows. So without wasting any time let’s see How to Enable Verbose or Highly Detailed Status Messages in Windows 10 with the help of the below-listed tutorial.

Make sure to create a restore point just in case something goes wrong.

Method 1: Enable Verbose or Highly Detailed Status Messages in Registry Editor

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

Run command regedit

2.Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System

3.Right-click on System then select New > DWORD (32-bit) Value.

Right-click on System then select New and then click DWORD (32-bit) Value

Note: Even if you’re on a 64-bit Windows, you still need to create the 32-bit value DWORD.

4.Name this newly created DWORD as VerboseStatus and hit Enter.

Name this newly created DWORD as VerboseStatus and hit Enter

5.Now double-click on VerboseStatus DWORD and change its value to according to:

To Enable Verbose: 1
To Disable Verbose: 0

To Enable Verbose set the value of VerboseStatus DWORD to 1

6.Click OK and close registry editor.

7.Reboot your PC to save changes.

Method 2: Enable Verbose or Highly Detailed Status Messages in Group Policy Editor

1.Press Windows Key + R then type gpedit.msc and hit Enter.

gpedit.msc in run

2.Navigate to the following path:

Computer Configuration > Administrative Templates > System

3.Make sure to select System then in the right window pane double-click on Display highly detailed status messages policy.

Double-click on Display highly detailed status messages policy

4.Change the value of the above policy according to:

To Enable Highly Detailed Status Messages: Enabled
To Disable Highly Detailed Status Messages: Not Configured or Disabled

To Enable Highly Detailed Status Messages set the policy to Enabled

Note: Windows ignores this setting if the Remove Boot / Shutdown / Logon / Logoff status messages setting is turned on.

5.Once done with the above setting click Apply followed by OK.

6.Once finished, close Group Policy Editor and restart your PC.

Recommended:

That’s it you have successfully learned How to Enable Verbose or Highly Detailed Status Messages in Windows 10 but if you still have any queries regarding this tutorial then feel free to ask them in the comment’s section.

鑫赵

About the author

我是一名软件工程师，拥有 Xbox Explorer、Microsoft Excel 和 Windows 8.1 Explorer 方面的经验。业余时间，我喜欢玩电子游戏和看电视。我拥有犹他大学的学位，目前在一家国际公司担任软件工程师。

在 Windows 10 中启用详细或高度详细的状态消息

在Windows 10中启用详细^(Verbose)或高度详细的状态消息^{(Highly Detailed Status Messages)}

方法 1：在注册表编辑器中启用详细或高度详细的状态消息^{(Method 1: Enable Verbose or Highly Detailed Status Messages in Registry Editor)}

方法 2：在组策略编辑器中启用详细或高度详细的状态消息^{(Method 2: Enable Verbose or Highly Detailed Status Messages in Group Policy Editor)}

Enable Verbose or Highly Detailed Status Messages in Windows 10