在尝试运行网络发现^{(Network Discovery)}扫描或尝试从命令提示符^{(Command Prompt)}或PowerShell映射网络驱动器^{(map a network drive)}时，您可能会遇到系统错误 67 has occurred, The network name cannot be found^{(System error 67 has occurred, The network name cannot be found)}。在这篇文章中，我们为这个问题提供了最合适的解决方案。

此错误最广为人知的原因是语法不正确。由于以下原因，您也可能会遇到此错误：

• ^(Incorrect)域控制器上的网络组件配置不正确。
• 域控制器上过时或不正确的网络适配器驱动程序。
• 安装的网络适配器驱动程序不适用于您当前运行的Microsoft Windows Server版本。^{(Microsoft Windows Server)}

如何修复指定^(Specified)的网络不再可用？

Windows 用户可以轻松修复指定的网络名称在Windows 10/11不再可用^{(The specified network name is no longer available)}，如下：打开控制面板^{(open Control Panel)}并选择程序^(Programs)和功能^(Features)，然后单击打开或关闭 Windows 功能^{(Turn Windows features on or off)}。在弹出窗口中，只需检查SMB 1.0/CIFS File Sharing Support功能并单击OK，然后重新启动计算机。

出现系统^(System)错误 67，找不到网络名称

如果您遇到此 系统错误 67，找不到网络名称^{(System error 67 has occurred, The network name cannot be found)}问题，您可以尝试以下解决方案（不分先后顺序），看看是否有助于解决问题。

1. 使用正确的语法（如果适用）
2. 更新网络适配器驱动程序
3. 重新启动分布式文件系统^{(Distributed File System)}服务
4. 禁用IP 网络地址转换器^{(IP Network Address Translator)}( IP NAT ) 驱动程序

让我们看一下关于列出的每个解决方案所涉及的过程的描述。

1]使用^(Use)正确的语法（如果适用）

由于不正确的语法是最常见的罪魁祸首，因此您需要确保在映射网络驱动器的情况下，使用反斜杠而不是正斜杠。这是一个常见的错误，通过使用正斜杠，终端会认为您正在指示一个选项。

2]更新网络适配器驱动程序

此解决方案要求您确保正在使用适用于操作系统的相应网络适配器驱动程序，然后更新^{(update the Network Adapter drivers)}域控制器上的网络适配器驱动程序并查看是否发生系统错误 67，找不到网络问题^{(System error 67 has occurred, The network cannot be found issue)}是解决。如果没有，请尝试下一个解决方案。

3]重新启动^(Restart)分布式文件系统^{(Distributed File System)}服务

这与其说是一种解决方案，不如说是一种变通方法——它需要您在域控制器上重新启动分布式文件系统服务。^{(Distributed File System)}

4]禁用IP网络地址转换器^{(Disable IP Network Address Translator)}（IP NAT）驱动程序

如果安装了网络地址转换器^{(Network Address Translator)}( NAT ) 但未正确配置，则最有可能发生此错误。要解决此问题，请在设备管理器中禁用^{(Device Manager)}Internet 协议^{(Internet Protocol)}(IP) NAT驱动程序，然后重新启动计算机。

请执行下列操作：

• 打开设备管理器^{(Open Device Manager)}。
• 在 查看^(View) 菜单上，单击 显示隐藏的设备^{(Show hidden devices)}。
• 展开 非即插即用驱动程序^{(Non-Plug and Play Drivers )}部分。
• 右键单击IP 网络地址转换器^{(IP Network Address Translator)}。
• 单击禁用^(Disable)。
• 单击 是^(Yes)。
• 再次单击“是”^(Yes)重新启动计算机。

希望这可以帮助！

为什么找不到网络路径？

如果您遇到异常的系统行为，例如未找到网络路径错误^{(the network path was not found error)}，则可能是系统时钟设置为不同的时间。要解决此问题，请确保尽可能使用网络时间协议^{(Network Time Protocol)}同步本地网络上的所有Windows设备以避免此问题。^(Windows)另外，禁用本地防火墙。

如何删除Internet连接？

要删除或禁用计算机上的Internet连接，您可以运行以下命令来删除本地计算机上的活动连接。

Net Use * /delete

此命令不仅删除本地计算机上的所有活动连接，还可以在远程计算机上用于相同的任务。

相关帖子^{(Related post)}：错误 0x80070037：指定的网络资源或设备不再可用。

System error 67 has occurred, The network name cannot be found

While attempting to run a Network Discovery scan or when trying to map a network drive from Command Prompt or PowerShell, you may encounter the System error 67 has occurred, The network name cannot be found. In this post, we provide the most suitable solutions to this issue.

The most widely known cause of this error is incorrect syntax. You may also encounter this error due to the following:

• Incorrect network components configurations on the domain controller.
• Outdated or incorrect network adapter drivers on the domain controller.
• The installed network adapter drivers don’t work with the Microsoft Windows Server version you’re currently running.

How do I fix Specified network is no longer available?

Windows users can easily fix The specified network name is no longer available on Windows 10/11 computer as follows: open Control Panel and select Programs and Features, then click Turn Windows features on or off. In the pop-up window, simply check the SMB 1.0/CIFS File Sharing Support feature and click OK, and then restart your computer.

System error 67 has occurred, The network name cannot be found

If you’re faced with this System error 67 has occurred, The network name cannot be found issue, you can try the solutions below in no particular order and see if that helps to resolve the issue.

1. Use the correct syntax (if applicable)
2. Update Network Adapter drivers
3. Restart the Distributed File System service
4. Disable IP Network Address Translator (IP NAT) driver

Let’s take a look at the description of the process involved concerning each of the listed solutions.

1] Use the correct syntax (if applicable)

As incorrect syntax is the most common culprit, you need to make sure in the case of mapping a network drive, you use backward slashes instead of forward slashes. This is a common mistake, and by using forward slashes, the terminal will think you are indicating an option instead.

2] Update Network Adapter drivers

This solution requires you to make sure that the appropriate network adaptor driver that works with the operating system is in use and then update the Network Adapter drivers on the domain controller and see if the System error 67 has occurred, The network cannot be found issue is resolved. If not, try the next solution.

3] Restart the Distributed File System service

This is more of a workaround than a solution – and it entails you restart the Distributed File System service on the domain controller.

4] Disable IP Network Address Translator (IP NAT) driver

If Network Address Translator (NAT) is installed but is not configured correctly, this error is most likely to occur. To resolve the issue, disable the Internet Protocol (IP) NAT driver in Device Manager, and then restart the computer.

Do the following:

• Open Device Manager.
• On the View menu, click Show hidden devices.
• Expand Non-Plug and Play Drivers section.
• Right-click IP Network Address Translator.
• Click Disable.
• Click Yes.
• Click Yes again to restart the computer.

Hope this helps!

Why Network path is not found?

If you’re experiencing unusual system behavior like the network path was not found error, it could be that the system clocks are set to different times. To resolve this issue, make sure all the Windows devices on a local network are synchronized using Network Time Protocol wherever possible to avoid this problem. Also, disable local firewalls.

How do I remove Internet connection?

To remove or disable Internet connection on your computer, you can run the command below to delete active connections on a local computer.

Net Use * /delete

This command not only deletes all the active connections on local computers but can also be used on remote computers for the same task.

Related post: Error 0x80070037: The specified network resource or device is no longer available.

Related posts

• Best免费Network Monitoring Tools用于Windows 10

• MiTeC Network Scanner是IT & System Administrators的意思

• 如何将ASUS router重置为出厂设置？ （4种方式）

• 如何在Windows Defender Firewall中编辑允许的应用程序列表（并阻止其他）

• 如何阻止您的Windows PC上的Remote Desktop

• 如何在 Windows 7 中自定义网络共享设置

• 每个人的安全 - 审查 PureVPN

• 如何在Windows 10使用Network Sniffer Tool PktMon.exe

• 如何在网上进行安全的银行和金融交易

• 如何在 Windows 8 和 8.1 中创建、配置和使用 VPN 连接

• 如何关闭“查找我的 iPhone”

• 使用 Windows Defender 防火墙阻止应用和游戏访问 Internet

• 从本地网络或 Internet 上的另一台 PC 更新 Windows 10

• 在 Windows 10 中更改 DNS 设置的 3 种方法

• 如何将 Windows 10 网络位置更改为私有（或公共）

• 如何更改Windows 10更新的带宽限制

• 回顾 Cyber​​Ghost：金钱可以买到的最好的 VPN 之一

• 在 Ubuntu 中挂载 Windows 7 共享分区和文件夹

• 约InPrivate and Incognito。什么是私人浏览？ Which browser是最好的吗？

• 如何重置 Windows 防火墙设置（4 种方法）