现在有多少人还在刻录 CD 和DVD^(DVDs)？如果您是少数人中的一员，那么您很可能遇到过“功率校准错误^{(Power Calibration Error)}”或“中速^{(Medium Speed Erro)}错误”的情况。” 多种^{(” Multiple)}因素可能导致此错误，但您知道吗，可能的原因可能是因为CD/DVD刻录机无法正确确定最佳功率校准^{(Optimum Power Calibration)}率。

对于那些想知道那是什么的人来说，它基本上是在燃烧过程之前运行的测试，以调节完成工作所需的最佳激光功率。如果这个过程未能相应地运行，那么猜猜怎么着？用户将无法在其 CD 或DVD上刻录内容。

功率校准错误

另一方面，有时“功率校准错误”只是因为小问题而发生，与调节激光功率无关。

刻录过程失败

在 Windows PC 上刻录CD^(CDs)和DVD^(DVDs)时，在使用Nero、ImgBurn等时，您最终可能会遇到 称为功率校准错误^{(Power Calibration Error)}或中速错误的^{(Medium Speed Error)}刻录过程失败^{(Burn process failed)}错误。如果您遇到此问题，您可以采取以下措施尝试解决问题。

1]购买优质媒体

刻录媒体的许多问题可归因于购买了低质量的 CD 或DVD^(DVDs)。依赖廉价产品并不总是一个好主意，因此，也许是时候开始花更多的钱来获得所需的质量了。

我们想推荐JVC、Verbatim和Falcon等品牌，仅举几个值得您花时间的品牌。

2]以较低的速度燃烧

老实说，做事太快通常会以灾难告终，在刻录 CD 或DVD^(DVDs)时也是如此。此时最好的做法是，或者在刻录的任何时候，以较慢的速度进行刻录，并花时间等待。

3]更新您的刻录软件

没错，如果您的刻录软件给您带来问题，检查您的刻录软件是否需要更新总是一个好主意。事实上，这对于任何软件都是一个好主意，所以请记住这一点。

4]清洁磁盘驱动器

市场上有几种用于清洁磁盘驱动器的工具。这些工具倾向于去除镜头上的灰尘颗粒，这对燃烧质量有很大帮助。它还有助于减少错误，这也很好。

有些人手动清洁磁盘驱动器，但如果您不是专家，我们不建议这样做。

5]禁用图像掌握应用程序编程接口^{(Image Mastering Applications Programming Interface)}（IMAPI）

^(Fire)通过单击开始^(Start)按钮启动控制^{(Control Panel)}面板，然后键入控制面板。它应该在搜索查询中弹出，之后，您必须单击以启动它。然后，下一步是选择System Security > Administrative Tools，然后单击Services。

从这里您将搜索显示IMAPI CD-Burning COM Service的选项。然后，您要做的是右键单击它并选择Properties。您现在必须将Startup Type从Enabled切换到Disabled；单击应用^(Apply)，然后重新启动^(Restart)计算机。

相关阅读^{(Related read)}：刻录到光盘在 Windows 10 中显示为灰色；无法刻录 DVD^{(Burn to disc is grayed out in Windows 10; Can’t burn DVD)}。

Burn process failed - Power Calibration Error or Medium Speed Error

How many people are still burning CDs and DVDs these days? If you’re one of the few, then chances are you’ve come acrosѕ something that says “Power Calibration Error” or “Medium Speed Error.” Multiple factors could cause this error, but you know what, the likely cause is probably because the CD/DVD burner is unable to properly determine the Optimum Power Calibration rate.

For those who are wondering what that is, it’s basically a test that runs before a burning process to regulate the optimal laser power required to get the job done. If this process fails to run accordingly, then guess what? It won’t be possible for users to burn content on their CD or DVD.

Power Calibration Error

On the other hand, there are times when the “Power Calibration Error” occurs for just small issues and nothing to do with regulating laser power.

Burn process failed

When burning CDs &DVDs on your Windows PC you may come across a Burn process failed error known as Power Calibration Error or Medium Speed Error eventually, when using Nero, ImgBurn, etc. If you face this issue, here are a few things you could try to fix the issue.

1] Purchase quality media

Many issues with burning media can be attributed to the purchase of low-quality CDs or DVDs. It’s not always a good idea to rely on cheap products, therefore, maybe it’s time to begin spending a little bit more to acquire the quality needed.

We’d like to recommend brands such as JVC, Verbatim, and Falcon, to name a few that are worth your time.

2] Burn at lower speeds

Let’s be honest here, doing things too quickly usually ends in disaster, and the same can be said when you’re burning CDs or DVDs. The best thing to do at this point, or at any time when burning, is to burn at a slower speed and just take the time to wait.

3] Update your burning software

That’s right, it’s always a good idea to check if your burning software requires an update if it’s giving you problems. In fact, this is a good idea for any software, so please keep that in mind going forward.

4] Clean the disk drive

There are several tools on the market that are designed for cleaning the disk drive. These tools tend to remove dust particles from the lens, and that aids a lot in the burning quality. It also helps with reducing errors, which is also good.

Some folks clean the disk drive manually, but that’s something we do not recommend if you’re not an expert.

5] Disable Image Mastering Applications Programming Interface (IMAPI)

Fire up the Control Panel by clicking on the Start button, then type control panel. It should pop up in the search query, after which, you must click to launch it. The next step, then, is to select System Security > Administrative Tools, then click Services.

From here you’ll search for the option that says IMAPI CD-Burning COM Service. What you’re going to do, then, is to right-click on it and select Properties. You must now switch Startup Type from Enabled to Disabled; click on Apply, then Restart your computer.

Related read: Burn to disc is grayed out in Windows 10; Can’t burn DVD.

Related posts

• Fix BitLocker Drive Encryption不能使用，Error 0x8031004A

• Windows 10 Brightness Control无法自动工作或更改

• Problem uploading至Windows Error Reporting service

• 我们无法设置您的默认保存位置，Error 0x80070005

• Fix Windows Update Error 0x80070005

• Background Intelligent Transfer Service不在Windows 11/10工作

• HTTPS在Windows computer上的任何浏览器中未在任何浏览器中打开

• Installation期间Fix Error Code 0x80070017，Update，System Restore

• 任务Host Window，Task Host正在停止背景任务

• 卸载Quality or Feature Update当Windows无法启动10

• 如何修复Xbox Error Code 0x800c000B

• Fix Event Error 1020＆1008 Microsoft-Windows-Perflib错误

• Skype Troubleshoot No Video，Audio or Sound在Windows上呼叫

• Add收藏夹按钮在Photos app中灰白色

• operating system version与Startup Repair不相容

• 视窗10卡住诊断您的PC screen

• Repair Corrupt Windows Image - Error 0x800f0906

• Fix Device encryption在Windows 11/10中暂时暂停错误

• Microsoft Store error 0x80072F05 - 服务器跌跌撞撞

• Paste Special option缺失或不在Office工作