如果您尝试在 Windows 10 中映射网络驱动器^{(map a network drive)}，但无法映射驱动器^{(unable to map a drive)}或远程连接驱动器并出现错误消息The network folder specified is current mapped using a different user name and password^{(The network folder specified is currently mapped using a different user name and password)}，那么这篇文章旨在帮助您解决问题的解决方案/解决方法。

当您遇到此问题时，您将收到以下完整错误消息；

The network folder specified is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share.

在以下情况下，您最有可能遇到此错误；您有一台基于 Windows 的计算机，并且远程服务器上有两个网络共享。您使用用户凭据连接到网络共享之一。然后，您尝试使用不同的用户凭据连接到其他网络共享。

当您在错误提示上单击确定^(OK)时，您会收到以下错误消息：

Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again.

指定的网络文件夹当前使用不同的用户名和密码进行映射

如果您遇到此问题，您可以通过两种方式之一解决问题，具体取决于您遇到错误的方式。

让我们看一下案例场景和解决问题的最佳方法。

1]使用不同的凭据使用连接？^(Connect)

如果您在映射第二个驱动器时选中了使用不同凭据连接^{(Connect using different credentials)}选项，则不需要 - 因为您已经将驱动器映射到该服务器，所以您不需要使用不同的凭据。在这种情况下，您可以取消选中该选项以避免此错误。

2]使用^(Using)不同的凭据连接第二个共享？

如果您使用不同的凭据连接第二个共享，则会发生相同的错误，这是设计使然 - Windows不允许使用不同的凭据映射到同一服务器。在这种情况下^(System)，您可以为远程服务器创建一个不同的域名^(Domain)系统( DNS ) 别名，然后使用此别名连接到网络共享。

您还可以编辑 Hosts 文件^{(edit the Hosts file)}并在其中列出您的服务器 - 因此，如果您使用该别名，您将不再收到错误。此外，当您尝试连接到网络共享时，您可以使用远程服务器的 IP 地址。在任何情况下，您现在都可以使用不同的用户凭据连接到网络共享，因为在这种情况下，计算机的行为就像连接到不同的服务器一样。

希望^(Hope)您发现这篇文章内容丰富且对您有所帮助！

Network folder specified is currently mapped using different username

If when you try to map a network drive in Windows 10, but you are unable to map a drive or connect a drive remotely with the error message The network folder specified is currently mapped using a different user name and password, then this post is intended to help you with the solution/workaround to the issue.

When you encounter this issue, you’ll receive the following full error message;

The network folder specified is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share.

You’re most likely to encounter this error in the following scenario; you have a Windows-based computer and there are two network shares on a remote server. You use user credentials to connect to one of the network shares. Then, you try to use different user credentials to connect to the other network share.

When you click OK on the error prompt, you receive the following error message:

Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again.

The network folder specified is currently mapped using a different user name and password

If you’re faced with this issue, you can resolve the issue in either of two ways, depending on how you encountered the error.

Let’s take a look at the case scenarios and the best approach to resolving the issue.

1] Using Connect using different credentials?

If you checked Connect using different credentials option while mapping the second drive, then it is not needed – since you have already mapped the drive to that server, you don’t need to use different credentials. In this case, you can uncheck that option to avoid this error.

2] Using different credentials to connect the second share?

If you use different credentials to connect the second share, the same error will occur and it is by design – Windows doesn’t allow mapping to the same server using different credentials. In this case, you can create a different Domain Name System (DNS) alias for the remote server, and then use this alias to connect to the network share.

You can also edit the Hosts file and list your servers there – so if you use that alias, you’ll no longer get the error. Also, you can use the IP address of the remote server when you try to connect to the network share. In any case, you can now use different user credentials to connect to the network share because, in this situation, the computer behaves as if it is connecting to a different server.

Hope you find this post informative and helpful!

Related posts

• 如何在Windows 10使用Network Sniffer Tool PktMon.exe

• 启用Network Connections而在Modern Standby上Windows 10

• 什么是Tor Network，它用于什么？

• 用LAN Speed Test tool测量Local Area Network speed

• 在Windows 11上启用或禁用Wi-Fi和Ethernet adapter

• 如何在Windows 10中使用LAN共享计算机之间的文件

• Network icon说没有internet access，但我已连接

• Best免费Network Diagram software用于设计您的网络

• Stop Client Computers从远程查询Host Computer Index

• 如何在Windows 10查看Wi-Fi Network Driver information

• 无法在Windows 10映射Network drive

• 什么是VLAN？为什么我们使用VLANs？

• Release TCP/IP，Flush DNS，Reset Winsock，Reset Proxy带Batch File

• 如何在Windows 10中配置Global Proxy Server Settings

• Windows无法从Windows 10中的路由器获取Network Settings

• Netcrunch Tool：免费Network Troubleshooting Toolkit

• 如何插入SIM card并在Surface device上设置数据连接

• 如何在Windows 10创建Wi-Fi Network Adapter Report

• 如何修复DHCP Lookup故障error om Windows & Chromebooks

• 如何启用DNS了在Windows 10 HTTPS