802.11是一组控制无线网络传输方法的IEEE标准。它们今天在以下版本中用于在不同环境（家庭/企业）中提供无线连接。

1. 802.11a
2. 802.11b
3. 802.11g
4. 802.11n

最新版本即802.11n是一种无线网络标准，它使用多个天线来提高数据速率。此版本的性能受网络设置、附近其他网络的干扰、频率（2.4GHz 或 5GHz）等影响。如果您发现它由于某种原因被禁用，您可以按照以下步骤查看 802.11n 连接的推荐设置，并在需要时在Windows 10/8

如何在Windows 11/10

要为Windows 11/10启用 802.11n模式无线连接^{(Mode Wireless Connection)}，请执行以下操作：

1. 打开控制面板
2. 选择开放网络^{(Choose Open Network)}和共享中心^{(Sharing Center)}
3. 单击更改适配器设置
4. 右键单击 Wi-Fi 适配器并选择属性
5. 在“属性^(Properties)”页面中，选择“配置”
6. 切换到高级选项卡^{(Advanced Tab)}并在属性下搜索 802.11n模式^(Mode)
7. 将其值更改为已启用。

继续阅读以获得详细的观点。

从开始^(Start)搜索，搜索并打开控制面板^{(Control Panel)}。然后选择网络^(Network)和共享中心^{(Sharing Center)}小程序。

接下来，单击“更改适配器设置”链接。

然后，右键单击 Wi-Fi 适配器并选择“属性”按钮。

这将打开“属性^(Properties)”框。从屏幕上显示的“属性^(Properties)”页面中，选择“配置”选项。

切换到“高级选项卡”并在“属性^(Property)”下搜索 802.11n模式^(Mode)，选择它并将其值^(Value)更改为“启用”。

如果由于某种原因，那里没有显示 802.11n 版本，请更新您的驱动程序^{(update your driver)}和固件。

完成后，点击“确定”按钮应用最终更改。

最后一步，与WiFi^(WiFi)路由器建立重新连接。

How to install 802.11n driver in Windows 11/10

802.11 is a set of IEEE standards that control wireless networking transmission methods. They are used today in the following version to offer wireless connectivity in different environments (home/business).

1. 802.11a
2. 802.11b
3. 802.11g
4. 802.11n

The latest version i.e. 802.11n, is a wireless networking standard that uses multiple antennas to increase data rates. The performance of this version is influenced by network setup, interference from other nearby networks, frequency (2.4GHz or 5GHz) and more. If you find it disabled for some reason, here are the steps you can follow to review the recommended settings for 802.11n connectivity and enable it in Windows 10/8, if needed.

How to install 802.11n driver in Windows 11/10

To enable 802.11n Mode Wireless Connection for Windows 11/10, do the following:

1. Open Control Panel
2. Choose Open Network and Sharing Center
3. Click Change Adapter Settings
4. Right-click the Wi-Fi adapter and select Properties
5. From Properties page, select Configure
6. Switch to Advanced Tab and search for the 802.11n Mode under the Property
7. Change its Value to Enabled.

Read on to get a detailed perspective.

From the Start search, search for and open Control Panel. Then choose Network and Sharing Center applet.

Next, click ‘Change Adapter Settings’ link.

Then, right-click the Wi-Fi adapter and select the ‘Properties’ button.

This will open the Properties box. From the ‘Properties’ page that shows up on your screen, select ‘Configure’ option.

Switch to ‘Advanced Tab’ and search for the 802.11n Mode under the Property, select it and change its Value to “Enabled“.

If for some reason, the 802.11n version doesn’t show there, update your driver and firmware.

When it’s done, hit the ‘OK’ button to apply the final changes.

As the last step, establish a re-connection with the WiFi router.

Related posts

• 如何在Windows 10查看Wi-Fi Network Driver information

• Best免费Driver Update Software为Windows 10

• 如何为Windows 10安装WiFi驱动程序

• 如何在Windows 11/10中使用.inf File手动安装Driver

• 如何Windows 11/10与DriverView显示所有设备驱动程序的列表

• 如何使用Windows 10的Charmap and Eudcedit内置工具

• PCI Serial Port Driver在Windows 11/10上未安装

• 免费Driver Backup & Restore software为Windows 10

• 如何检查在Windows 10的Shutdown and Startup Log

• 如何在Windows 11/10中更新Bluetooth驱动程序

• Bad GPU Driver Update引起Windows 11/10问题

• Windows 10中的Stop自动连接到Wireless Network

• 如何在Windows 11/10中更新驱动程序

• 如何在Windows 10中设置Metered Connections

• Fix Wireless Printer没有响应Windows 11/10

• Windows 11/10 Fix Generic PnP Monitor驱动程序问题

• 如何在Windows 10中使用Command Prompt更新驱动程序

• Wi-Fi图标丢失或未显示在Windows 10任务栏上显示

• 如何在Windows 10重新启动Graphics Driver

• 如何在Windows 10中更改2.4 GHz至5 GHz的Wi-Fi band