在一段时间内，您在Windows计算机上安装了多个程序。其中许多程序在启动项中添加条目并将服务^(Services)添加到Windows，这些程序需要在Windows启动时启动。这会导致Windows^(Windows) PC 在启动时间和性能方面变慢，因为要运行的程序太多。

您可以使用内置的 MSConfig Utility或一些不错的免费软件（如WinPatrol或CCleaner）来删除、禁用或管理您的启动程序^{(remove, disable, or manage your startup programs)}。但是，如果您需要测量启动时间或 Windows 11/10/8/7 启动所需的时间，则需要使用Windows 评估和部署工具包^{(Windows Assessment and Deployment Toolkit)}，或者您可以查看其中一些免费软件，让您这样做很容易。

在Windows 11/10中测量启动^(Startup)或引导时间^{(Boot Time)}

我们将看看以下免费软件，它们将帮助您测量Windows 11/10中的启动或启动时间：

1. Windows 启动计时器
2. 引导赛车
3. 应用定时器
4. 索卢托
5. MaaS360 启动分析。

1]Windows启动计时器

^{(Windows Boot Timer)}当您启动计算机并测量系统总启动时间时，Windows 启动计时器会自行加载到内存中。加载所有系统进程后，该实用程序会将自身从系统内存中删除并显示总启动时间。无需安装。您需要做的就是双击可执行文件并在重新启动时；它将显示您的计算机加载窗口所花费的时间。它不计算通过BIOS或BIOS启动密码所花费的时间。

2]引导赛车

BootRacer可让您测量Windows计算机启动所需的时间。BootRacer的主要功能是完全控制Windows启动时间。

3]应用定时器

AppTimer是一个免费软件，它将运行一个可执行文件，预设次数，然后测量每次启动所需的时间。它测量在退出应用程序之前直到接受用户输入的状态的时间。每次运行后，AppTimer将以自动方式关闭应用程序，然后再次重新启动它。

4] 解决方案

Soluto不仅会测量您的启动时间，还会帮助您进一步优化启动时间。它采用创新的低级Windows内核技术来识别用户要求他们的 PC 做什么，以及他们的 PC 作为回报做什么。当计算机启动并准备好使用时，它可以延迟加载不必要的程序或服务。这样，此类程序和服务将在稍后启动，从而使您的计算机更早地准备好供您使用。

5]引导分析器

MaaS360 Boot Analyzer将为您提供有关计算机启动活动的详细信息。它有一个干净且易于理解的界面。主窗口显示一个图表，其中包含有关启用启动模式的日期和时间的详细信息。在测量启动时间时，它可以让您提及启动次数。它还保留了您之前启动时间的历史记录。去这里^(here)拿。

想让Windows 启动、运行、关机更快吗？^{(make Windows Startup, Run, Shutdown Faster?)(Want to make Windows Startup, Run, Shutdown Faster?)}

Free software to measure Boot or Startup Time in Windows 11/10

Over а perіod of time, you install several programs on yoυr Windows computеr. Many of theѕe prоgrams add entries to thе startup items and add Services to Windows, which need to start when Windows starts. This resultѕ in the slowing down of your Windows РC, in terms of boot times as well as performance, because too many programѕ want to run.

You can use the built-in MSConfig Utility, or some nice freeware like WinPatrol or CCleaner, to remove, disable, or manage your startup programs. But if you need to measure the boot time or the time your Windows 11/10/8/7 takes to start up, you will need to use Windows Assessment and Deployment Toolkit, or you can check out some of these free software that let you do so easily.

Measure Startup or Boot Time in Windows 11/10

We will take a look at the following free software that will help you measure the boot or stauptime in Windows 11/10:

1. Windows Boot Timer
2. BootRacer
3. AppTimer
4. Soluto
5. MaaS360 Boot Analyze.

1] Windows Boot Timer

Windows Boot Timer loads itself into memory when you start your computer and measures total system boot time. After all system processes have loaded, the utility removes itself from the system memory and displays the total boot time. No installation is required. All you need to do is double-click on the executable & upon restart; it will display the time taken by your computer to load windows. It does not count the time taken to go through BIOS or BIOS boot up a password.

2] BootRacer

BootRacer will let you measure the time required for your Windows computer to boot. The main function of BootRacer is total control over Windows boot time.

3] AppTimer

AppTimer is a freeware that will run an executable, a pre-set number of times and then measure the time it takes to start-up each time. It measures the time up to the state where user input is being accepted before exiting the application. After each run AppTimer will close the application in an automated fashion, before restarting it again.

4] Soluto

Soluto will not only measure your boot time but also help you optimize boot time further. It employs innovative low-level Windows kernel technologies to identify what users are asking their PC to do, and what their PC does in return. It can delay the loading of programs or services that aren’t necessary when the computer is booting and readying itself for use. This way, such programs and services are launched a little later, thus making your computer that much earlier and ready for you to use.

5] Boot Analyzer

MaaS360 Boot Analyzer will give you detailed information s about the boot activity of your computer. It has a clean and easy-to-understand interface. The main window displays a graph with details about the date and time when the boot mode was enabled. While measuring boot times, it lets you mention the number of boots. It also maintains a history of your previous boot times. Go get it here.

Want to make Windows Startup, Run, Shutdown Faster?

Related posts

• 什么是Fast Startup以及如何在Windows 10中启用或禁用它

• 如何在Windows 10到access and use Advanced Startup options

• 计划在Startup folder在Windows 10没有启动启动

• 如何在Windows 10中禁用Startup程序

• Windows 10中Startup folder的位置

• 如何添加或更改Time Server在Windows 10

• 如何在Windows 10执行Clean Boot

• 如何在 Windows 11/10 中禁用快速启动（以及为什么应该）

• 什么是选择性Startup mode在Windows 10中

• Fix Error 1962，在Windows 10计算机上找不到操作系统

• 如何Time Boot和执行Windows 10一个Boot Trace

• 为什么我的ping Time在Windows 11/10中如此之高？

• 如何在Windows 10中更改DHCP Lease Time

• 如何检查在Windows 10的Shutdown and Startup Log

• 如何使PWAs运行在Startup自动Windows 10

• 用Windows Boot Timer测量Windows中的Boot Time

• 自动Startup Repair无法在Windows 10修理您的电脑

• 如何测量Windows 11/10中的Reaction Time

• Fix的Windows 10 Automatic Startup Repair不工作

• Windows 11/10中的Change Internet Time Update interval