您可能无法连接到您的WiFi ,这就是您在(WiFi)Windows 10中看到“无法连接(Connect)到此网络”错误的原因。无论您尝试多少次,在您重新启动 PC 之前,您总是会收到此错误消息,这在几次之后会变得非常令人沮丧。此问题主要发生在拥有英特尔无线网卡的(Intel Wireless)Windows 10用户身上,但这并不意味着它仅限于英特尔(Intel)。
虽然有可能的解释,例如损坏或过时的无线驱动程序(wireless drivers)、冲突的 802.11n模式(Mode)、防病毒或防火墙可能入侵、IPv6问题等,但没有单一原因导致此错误发生。这主要取决于用户系统配置,这就是为什么我们列出了似乎可以解决问题的所有可能的故障排除方法。因此,不要浪费任何时间,让我们看看如何实际修复此错误。
修复(Fix)Windows 10中无法连接(Connect)到此网络问题
确保 创建一个还原点(create a restore point) 以防万一出现问题。
方法一:忘记 WiFi 网络(Method 1: Forget WiFi Network)
1. 单击系统托盘中的无线图标(Wireless icon),然后单击网络设置。(Network Settings.)
2. 然后单击管理已知网络( Manage Known networks)以获取已保存网络的列表。
3.现在选择Windows 10不会记住密码的那个,然后单击忘记。(click Forget.)
4. 再次单击系统托盘中的无线图标( wireless icon)并连接到您的网络,它会要求输入密码,因此请确保您随身携带无线(Wireless)密码。
5.输入密码后,您将连接到网络,Windows将为您保存该网络。
6.重新启动您的PC并再次尝试连接到同一网络,这一次Windows会记住您的WiFi密码。此方法似乎 修复了 Windows 10 中无法连接到此网络的问题(Fix Can’t Connect to this network issue in Windows 10)。
方法 2:禁用然后启用您的 WiFi 适配器(Method 2: Disable and then Enable your WiFi-adapter)
1. 按 Windows 键 + R,然后键入ncpa.cpl并按 Enter。
2. 右键单击您的无线适配器( wireless adapter)并选择禁用。(Disable.)
3. 再次右键单击同一个适配器,这次选择启用。(choose Enable.)
4.重新启动并再次尝试连接到您的无线网络,看看您是否可以修复(F)无法连接到此网络的问题。(ix Can’t Connect to this network issue.)
Method 3: Flush DNS and Reset TCP/IP
1.右键单击Windows按钮(Windows Button)并选择“命令提示符(管理员)(Command Prompt(Admin))。”
2. 现在输入以下命令并在每个命令后按Enter :
ipconfig /release
ipconfig /flushdns
ipconfig /renew
3.再次(Again),打开Admin Command Prompt并键入以下内容,然后在每个之后按回车:
ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset
4. 重新启动以应用更改。刷新DNS似乎修复了 Windows 10 中无法连接到此网络的问题。(Fix Can’t Connect to this network issue in Windows 10.)
方法 4:运行网络疑难解答(Method 4: Run Network Troubleshooter)
1. 按Windows Key + I 打开设置(Settings),然后单击更新和安全。( Update & Security.)
2. 从左侧菜单中,选择疑难解答。( Troubleshoot.)
3. 在疑难解答下,单击Internet 连接( Internet Connections),然后单击运行疑难解答。(Run the troubleshooter.)
4. 按照屏幕上的进一步说明运行疑难解答。
5. 重新启动您的 PC 以保存更改。
方法 5:卸载您的网络适配器(Method 5: Uninstall your Network Adapter)
1. 按Windows键 + R,然后输入“ devmgmt.msc ”并按Enter 键(Enter)打开设备管理器。
2.展开网络(Expand Network)适配器并右键单击 无线网卡。(Wireless network card.)
3. 选择 卸载(Uninstall),如果要求确认,选择是。
4. 重新启动以保存更改,然后尝试重新连接您的无线(Wireless)。
方法 6:更新 WiFi 驱动程序(Method 6: Update WiFi Drivers)
- 按 Windows 键 + R,然后键入devmgmt.msc并按 Enter。
2.展开网络(Expand Network)适配器,然后右键单击已安装的网络适配器并选择更新驱动程序软件。(Update Driver Software.)
3. 然后选择自动搜索更新的驱动程序软件。( Search automatically for updated driver software.)
4. 重新启动您的 PC 以保存更改。如果问题仍然存在,请执行下一步。
5. 再次选择更新驱动程序软件(Update Driver Software),但这次选择“浏览我的计算机以查找驱动程序软件。(Browse my computer for driver software.)'
6. 接下来,在底部单击“让我从计算机上的设备驱动程序列表中选择”。(‘Let me pick from a list of device drivers on the computer.’)
7. 从列表中选择最新的驱动程序,然后单击下一步(Next)。
8.让Windows安装驱动程序,一旦完成关闭一切。
9. 重新启动您的 PC 以保存更改,您可能能够在 Windows 10 中修复无法连接到此网络问题。(Fix Can’t Connect to this network issue in Windows 10.)
方法 7:暂时禁用防病毒和防火墙(Method 7: Temporarily Disable Antivirus and Firewall)
有时,防病毒(Antivirus)程序可能会导致Chrome 出现错误(error on Chrome ),要验证此处不是这种情况,您需要在有限的时间内禁用防病毒软件,以便在防病毒软件关闭时检查错误是否仍然出现。
1. 右键单击系统托盘中的防病毒程序图标( Antivirus Program icon)并选择禁用。(Disable.)
2. 接下来,选择防病毒软件将保持禁用的时间范围。( Antivirus will remain disabled.)
注意:选择尽可能短的时间,例如 15 分钟或 30 分钟。
3. 完成后,再次尝试连接以打开Google Chrome并检查错误是否解决。
4. 从开始菜单(Start Menu)搜索栏搜索控制面板,点击打开 控制面板。( Control Panel.)
5. 接下来,单击系统和安全,( System and Security)然后单击Windows 防火墙。(Windows Firewall.)
6. 现在从左侧窗格中单击打开或关闭 Windows 防火墙。( Turn Windows Firewall on or off.)
7.选择关闭 Windows 防火墙并重新启动您的 PC。(Select Turn off Windows Firewall and restart your PC.)
再次尝试打开Google Chrome并访问之前显示(Google Chrome) 错误 ( error. )的网页。如果上述方法不起作用,请按照相同的步骤重新打开您的防火墙。( turn on your Firewall again.)
方法 8:禁用 IPv6(Method 8: Disable IPv6)
1. 右键单击系统托盘上的WiFi图标,然后单击“打开网络和共享中心”。(Open Network and Sharing Center.)”
2. 现在 单击您当前的连接(click on your current connection)以打开 设置。(Settings.)
注意:(Note:)如果您无法连接到您的网络,请使用以太网(Ethernet)电缆进行连接,然后按照此步骤操作。
3. 在刚刚打开的窗口中单击 属性按钮(Properties button) 。
4. 确保 uncheck Internet Protocol Version 6 (TCP/IP).
5.单击确定(Click OK),然后单击关闭(Close)。重新启动(Reboot)您的 PC 以保存更改。
方法 9:更改 802.11 通道宽度(Method 9: Change 802.11 Channel Width)
1. 按 Windows 键 + R 然后键入ncpa.cpl并按 Enter 打开网络连接。(Network Connections.)
2. 现在右键单击您当前的 WiFi 连接( current WiFi connection)并选择属性。(Properties.)
3. 单击 Wi-Fi 属性窗口中的配置按钮(Configure button)。
4. 切换到高级选项卡( Advanced tab)并选择802.11 信道宽度。(802.11 Channel Width.)
5. 将 802.11 Channel Width(Channel Width)的值更改为20 MHz,然后单击 OK。
6. 关闭所有内容并重新启动您的 PC 以保存更改。您可以使用此方法修复由于Windows 10 中的网络连接错误 0x00028002导致无法(network connection error 0x00028002 in Windows 10)连接(Connect)到此网络的错误,但如果由于某种原因它对您不起作用,请继续。
方法 10:确保您的适配器和路由器使用相同的安全设置(Method 10: Make sure your Adapter and Router are using the same security settings)
1. 打开网络(Network)和共享中心(Sharing Center)并单击您当前的 WiFi 连接。(current WiFi connection.)
2. 在刚刚打开的新窗口中单击无线属性( Wireless Properties)。
3. 切换到安全选项卡(Security tab)并选择您的路由器使用的相同安全类型(same security type)。
4. 您可能需要尝试不同的选项来解决此问题。
5. 重新启动您的 PC 以保存更改。
方法 11:禁用 802.11n 模式(Method 11: Disable 802.11n Mode)
1. 按 Windows 键 + R 然后输入ncpa.cpl并按 Enter打开网络连接(open Network Connections)
2. 现在右键单击您当前的WiFi 连接( WiFi connection)并选择属性。( Properties.)
3. 单击Wi-Fi属性窗口中的配置(Configure)按钮。
4. 切换到高级(Advanced)选项卡并选择802.11n 模式。( 802.11n Mode.)
5. 确保将其值设置为已禁用(Disabled),然后单击确定。
6. 关闭所有内容并重新启动您的 PC 以保存更改。这可能能够修复 Windows 10 中无法连接到此网络的问题,(Fix Can’t Connect to this network issue in Windows 10)但如果不能,则继续。
方法12:手动添加连接(Method 12: Add the connection manually)
1. 右键单击系统托盘中的WiFi图标,然后选择打开网络和共享中心(Open Network and Sharing Center)。
2. 单击底部的设置新连接或网络(Set up a new connection or network)。
3. 选择“手动连接无线网络(Manually connect to a wireless network)”,点击下一步。
4. 按照屏幕上的说明输入用户名(Enter username)和密码来配置这个新连接。
5.单击下一步完成该过程并检查您是否可以毫无问题地连接到该网络。
方法 13:将无线网络模式更改为默认值(Method 13: Change the Wireless Network Mode to Default)
1. 按 Windows 键 + R 然后输入ncpa.cpl并按 Enter 打开网络连接( Network Connections)
2. 现在右键单击您当前的WiFi连接并选择属性。(select Properties.)
3. 单击Wi-Fi属性窗口中的配置(Configure)按钮。
4.切换到高级(Advanced)选项卡并选择无线模式。(Wireless Mode.)
5. 现在将值更改为802.11b 或 802.11g(802.11b or 802.11g),然后单击确定。
注意:(Note:)如果上述值似乎不能解决问题,请尝试不同的值来解决问题。
6.关闭一切并重新启动您的PC,看看错误 无法连接到此(Can’t Connect to this )网络是否已解决。
方法 14:使用命令提示符(Method 14: Use Command Prompt)
1. 按Windows Key + X,然后选择命令提示符(管理员)。(Command Prompt (Admin).)
2. 键入以下命令并在每个命令后按Enter :
reg delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f
netcfg -v -u dni_dne
3. 关闭 cmd 并重新启动您的 PC。
方法 15:执行干净启动(Method 15: Perform a Clean Boot)
有时,第 3 方软件可能会与Windows 应用商店(Windows Store)发生冲突,因此,您不应从Windows应用商店安装任何应用。要修复 Windows 10 中无法连接到此网络的问题(Fix Can’t Connect to this network issue in Windows 10),您需要在 PC 中 执行干净启动(perform a clean boot)并逐步诊断问题。
受到推崇的:(Recommended:)
就是这样,您已经成功修复了 Windows 10 中无法连接到此网络的问题,(Fix Can’t Connect to this network issue in Windows 10)但如果您对这篇文章仍有任何疑问,请随时在评论部分询问他们。
Fix Can't Connect to this network issue in Windows 10
You probably can’t connect to your WiFi, and that’s why you see the error “Can’t Connect to thіs network” in Windows 10. Nо mattеr how many times yoυ try, you will always receive this error until you reboot your PC, which becomes very frustrating after a few times. Thіs problem mostly occurs with Windows 10 users who have Intel Wireless card, but it doesn’t mean it’ѕ limited to Intel only.
While there is possible explanation such as corrupted or outdated wireless drivers, conflicting 802.11n Mode, antivirus or firewall possible intrusion, IPv6 issues etc. but there is no single cause as to why this error occurs. It mostly depends on user system configuration, and that’s why we have listed all the possible troubleshooting methods which seem to fix the issue. So without wasting any time, let’s see how actually to fix this error.
Fix Can’t Connect to this network issue in Windows 10
Make sure to create a restore point just in case something goes wrong.
Method 1: Forget WiFi Network
1. Click on the Wireless icon in the system tray and then click Network Settings.
2. Then click on Manage Known networks to get the list of saved networks.
3.Now select the one which Windows 10 won’t remember the password for and click Forget.
4. Again click the wireless icon in the system tray and connect to your network, it will ask for the password, so make sure you have the Wireless password with you.
5.Once you have entered the password you will connect to the network and Windows will save this network for you.
6.Reboot your PC and again try to connect to the same network and this time Windows will remember the password of your WiFi. This method seems to Fix Can’t Connect to this network issue in Windows 10.
Method 2: Disable and then Enable your WiFi-adapter
1. Press Windows Key + R then type ncpa.cpl and hit Enter.
2. Right-click on your wireless adapter and select Disable.
3. Again right-click on the same adapter and this time choose Enable.
4. Restart your and again try to connect to your wireless network and see if you can Fix Can’t Connect to this network issue.
Method 3: Flush DNS and Reset TCP/IP
1. Right-click on Windows Button and select “Command Prompt(Admin).”
2. Now type the following command and press Enter after each one:
ipconfig /release
ipconfig /flushdns
ipconfig /renew
3. Again, open Admin Command Prompt and type the following and hit enter after each one:
ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset
4. Reboot to apply changes. Flushing DNS seems to Fix Can’t Connect to this network issue in Windows 10.
Method 4: Run Network Troubleshooter
1. Press Windows Key + I to open Settings then click on Update & Security.
2. From the left-hand menu, select Troubleshoot.
3. Under Troubleshoot, click on Internet Connections and then click Run the troubleshooter.
4. Follow further on-screen instructions to run the troubleshooter.
5. Reboot your PC to save changes.
Method 5: Uninstall your Network Adapter
1. Press Windows key + R, then type “devmgmt.msc” and hit Enter to open device manager.
2. Expand Network adapters and right-click on the Wireless network card.
3. Select Uninstall, if asked for confirmation, select yes.
4. Reboot to save changes and then try to reconnect your Wireless.
Method 6: Update WiFi Drivers
- Press Windows Key + R then type devmgmt.msc and hit Enter.
2. Expand Network adapters then right-click on your installed network adapter and select Update Driver Software.
3. Then choose Search automatically for updated driver software.
4. Reboot your PC to save changes. If the problem persists, then follow the next step.
5. Again select Update Driver Software but this time chooses ‘Browse my computer for driver software.‘
6. Next, at the bottom click ‘Let me pick from a list of device drivers on the computer.’
7. Select the latest driver from the list and click Next.
8. Let the Windows install drivers and once complete close everything.
9. Reboot your PC to save changes, and you may be able to Fix Can’t Connect to this network issue in Windows 10.
Method 7: Temporarily Disable Antivirus and Firewall
Sometimes the Antivirus program can cause an error on Chrome and to verify this is not the case here, you need to disable your antivirus for a limited time so that you can check if the error still appears when the antivirus is off.
1. Right-click on the Antivirus Program icon from the system tray and select Disable.
2. Next, select the time frame for which the Antivirus will remain disabled.
Note: Choose the smallest amount of time possible, for example, 15 minutes or 30 minutes.
3. Once done, again try to connect to open Google Chrome and check if the error resolves or not.
4. Search for the control panel from the Start Menu search bar and click on it to open the Control Panel.
5. Next, click on System and Security then click on Windows Firewall.
6. Now from the left window pane click on Turn Windows Firewall on or off.
7. Select Turn off Windows Firewall and restart your PC.
Again try to open Google Chrome and visit the web page, which was earlier showing the error. If the above method doesn’t work, please follow the same steps to turn on your Firewall again.
Method 8: Disable IPv6
1. Right-click on the WiFi icon on the system tray and then click on “Open Network and Sharing Center.”
2. Now click on your current connection to open Settings.
Note: If you can’t connect to your network, then use an Ethernet cable to connect and then follow this step.
3. Click the Properties button in the window that just open.
4. Make sure to uncheck Internet Protocol Version 6 (TCP/IP).
5. Click OK, then click Close. Reboot your PC to save changes.
Method 9: Change 802.11 Channel Width
1. Press Windows Key + R then type ncpa.cpl and hit Enter to open Network Connections.
2. Now right-click on your current WiFi connection and select Properties.
3. Click the Configure button in the Wi-Fi properties window.
4. Switch to the Advanced tab and select the 802.11 Channel Width.
5. Change the value of 802.11 Channel Width to 20 MHz then click OK.
6. Close everything and reboot your PC to save changes. You may be able to fix the error Can’t Connect to this network due to network connection error 0x00028002 in Windows 10 with this method but if for some reason it didn’t work for you then continue.
Method 10: Make sure your Adapter and Router are using the same security settings
1. Open Network and Sharing Center and click on your current WiFi connection.
2. Click Wireless Properties in the new window that just opened.
3. Switch to Security tab and select the same security type that your router is using.
4. You might have to try different options to fix this issue.
5. Restart your PC to save changes.
Method 11: Disable 802.11n Mode
1. Press Windows Key + R then type ncpa.cpl and hit Enter to open Network Connections
2. Now right-click on your current WiFi connection and select Properties.
3. Click the Configure button in the Wi-Fi properties window.
4. Switch to the Advanced tab and select the 802.11n Mode.
5. Make sure to set it’s value to Disabled then click OK.
6. Close everything and reboot your PC to save changes. This may be able to Fix Can’t Connect to this network issue in Windows 10 but if not then continue.
Method 12: Add the connection manually
1. Right-click on the WiFi icon in the system tray and select Open Network and Sharing Center.
2. Click Set up a new connection or network in the bottom.
3. Choose “Manually connect to a wireless network” and click Next.
4. Follow on-screen instruction and Enter username & password to configure this new connection.
5.Click Next to finish the process and check if you can connect to this network without any problems.
Method 13: Change the Wireless Network Mode to Default
1. Press Windows Key + R then type ncpa.cpl and hit Enter to open Network Connections
2. Now right-click on your current WiFi connection and select Properties.
3. Click the Configure button in the Wi-Fi properties window.
4.S witch to the Advanced tab and select Wireless Mode.
5. Now change the value to 802.11b or 802.11g and click OK.
Note: If the above value doesn’t seem to fix the problem, try different values to fix the issue.
6.Close everything and restart your PC and see if the error Can’t Connect to this network is resolved or not.
Method 14: Use Command Prompt
1. Press Windows Key + X then select Command Prompt (Admin).
2. Type the following command and hit Enter after each one:
reg delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f
netcfg -v -u dni_dne
3. Close cmd and reboot your PC.
Method 15: Perform a Clean Boot
Sometimes 3rd party software can conflict with Windows Store and therefore, you should not install any apps from Windows apps store. To Fix Can’t Connect to this network issue in Windows 10, you need to perform a clean boot in your PC and diagnose the issue step by step.
Recommended:
That’s it you have successfully Fix Can’t Connect to this network issue in Windows 10 but if you still have any queries regarding this post feel free to ask them in the comment’s section.