修复桌面指的是不可用的位置： ^{(Fix Desktop Refers to A Location That Is Unavailable: )}如果您在启动 PC 时收到以下错误消息“C:\Windows\system32\config\systemprofile\desktop 指的是不可用的位置”，则表示不正确桌面位置。当您登录您的帐户时，您会发现您的所有桌面图标和应用程序都不存在，而是您将拥有一个完全空白的桌面并弹出以下错误：

– C:\Windows\system32\config\systemprofile\Desktop refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location.——

现在没有特定原因导致此错误消息，但当您的系统突然崩溃损坏系统文件、损坏用户配置文件或损坏Windows更新等时，您可能会遇到此问题。所以不要浪费任何时间，让我们看看如何实际修复桌面^{(Fix Desktop Refers)}是指在下面列出的故障排除指南的帮助下不可用的位置。

修复桌面引用^{(Fix Desktop Refers)}不可用的位置

确保 创建一个还原点^{(create a restore point)}，以防万一出现问题。

方法 1：将桌面重置为默认位置^{(Method 1: Reset Desktop to Default Location)}

1.按Windows Key + R然后键入以下内容并按 Enter：

C:\users\%username%

2.右键单击桌面^(Desktop)文件夹并选择属性。^{(Properties.)}

3.在桌面属性切换到位置选项卡^{(Location tab)}，然后单击恢复默认按钮。^{(Restore Default button.)}

4.单击应用，然后单击确定。

5.重新启动您的 PC 以保存更改并查看您是否能够修复桌面指的是不可用错误的位置。^{(Fix Desktop Refers to A Location That Is Unavailable Error.)}

方法 2：注册表修复^{(Method 2: Registry Fix)}

如果上述方法不起作用，请尝试以下方法：

1.按 Windows 键 + R 然后键入regedit并按Enter打开注册表编辑器^{(Registry Editor)}。

2.导航到以下注册表项：

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

3.确保选择用户外壳文件夹^{(User Shell Folders)}，然后在右窗格中双击桌面。^(Desktop.)

4.现在在值数据字段中确保值设置为：

%USERPROFILE%\Desktop 

或者^(OR)

C:\Users\%USERNAME%\Desktop

5.单击确定并关闭注册表编辑器^{(Registry Editor)}。

6.重新启动您的 PC 以保存更改。

方法 3：将桌面文件夹复制回其位置^{(Method 3: Copy Desktop Folder Back to Its Location)}

1.按Windows Key + R然后键入以下内容并按 Enter：

C:\users\%username%

2.看看你能不能找到两个桌面^(Desktop)文件夹，一个是空的，另一个是你的桌面内容。

3.如果这样做，则删除空的桌面文件夹。^{(delete the desktop folder which is empty.)}

4.现在复制包含您的数据的桌面文件夹并导航到以下位置：

C:\Windows\system32\config\systemprofile\

5.当您导航到 systemprofile 文件夹时，它将获得您的许可，只需单击Continue即可访问该文件夹。

6.将 Desktop 文件夹粘贴^{(Paste the Desktop folder)}到systemprofile 文件夹中。^{(systemprofile folder.)}

7.重新启动您的 PC 以保存更改并查看您是否能够修复桌面引用不可用错误的位置。^{( Fix Desktop Refers to A Location That Is Unavailable Error.)}

方法 4：执行系统还原^{(Method 4: Perform System Restore)}

1.按 Windows 键 + R 并键入“ sysdm.cpl ”，然后按 Enter。

2.选择系统保护^{(System Protection)}选项卡，然后选择系统还原。^{( System Restore.)}

3.单击下一步并选择所需的系统还原点^{(System Restore point)}。

4.按照屏幕提示完成系统还原。

5.重新启动后，您可能能够修复桌面引用的位置不可用错误。^{(Fix Desktop Refers to A Location That Is Unavailable Error.)}

方法 5：创建新用户帐户^{(Method 5: Create a New User Account)}

1.按 Windows 键 + I 打开设置^(Settings)，然后单击帐户。^(Accounts.)

2.单击左侧菜单中的家庭和其他人选项卡，然后单击其他人下的将其他人^{(Family & other people tab)}添加到此PC^{(Add someone else to this PC)}。

3.点击底部的我没有此人的登录信息^{( I don’t have this person’s sign-in information)}。

4.选择底部的添加没有Microsoft帐户的用户。^{(Add a user without a Microsoft account)}

5.现在输入新帐户的用户名和密码，然后单击下一步^(Next)。

然后登录到新的用户帐户：^{(Log in to the new user account then:)}

1.打开文件资源管理器^{(File Explorer)}，然后单击 View > Options.

2.切换到查看选项卡^{(View tab)}并勾选显示隐藏文件、文件夹和驱动器。^{(Show hidden files, folders, and drives.)}

3.取消选中隐藏受保护的操作系统文件（推荐）。^{(Uncheck Hide protected operating system files (Recommended).)}

4.单击应用，然后单击确定。

5.导航到以下位置：

C:\Users\Old_Username

注意：这里 C 是安装Windows的驱动器， ^(Windows)Old_Username是您的旧帐户用户名。

6.选择上述文件夹中的所有文件，以下文件除外：

Ntuser.dat
Ntuser.dat.log
Ntuser.ini

7.现在按Windows Key + R然后键入以下内容并按 Enter：

C:\users\%username%

注意：^(Note:)这将是您的新用户帐户文件夹。

8.在此处粘贴复制的内容并重新启动您的 PC。

受到推崇的：^{(Recommended:)}

• 修复无法设置默认打印机错误 0x00000709^{(Fix Unable to Set Default Printer Error 0x00000709)}
• 修复麦克风在 Windows 10 上不起作用^{(Fix Microphone Not Working on Windows 10)}
• 从 Windows 10 移除 Candy Crush Soda Saga^{(Remove Candy Crush Soda Saga from Windows 10)}
• 修复 WiFi 在 Windows 10 中无法自动连接^{(Fix WiFi doesn’t connect automatically in Windows 10)}

就是这样，您已成功修复桌面引用了不可用的位置错误^{(Fix Desktop Refers to A Location That Is Unavailable Error)}，但如果您对本指南仍有任何疑问，请随时在评论部分提出。

Fix Desktop Refers to A Location That Is Unavailable

Fix Desktop Refers to A Location That Is Unavailable: If you are receiving the following error message when you start your PC “C:\Windows\system32\config\systemprofile\desktop refers to a location that is unavailable” then this indicates incorrect desktop location. When you log in to your account, you will discover that all of your desktop icons and apps are not present, instead, you will have a completely blank desktop and the following error pops up:

“C:\Windows\system32\config\systemprofile\Desktop refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location.“

Now there is no particular cause for this error message but you can face this issue when your system crashes abruptly damaging system files, corrupting user profile, or a corrupting Windows update etc. So without wasting any time let’s see how to actually Fix Desktop Refers to A Location That Is Unavailable with the help of the below-listed troubleshooting guide.

Fix Desktop Refers to A Location That Is Unavailable

Make sure to create a restore point just in case something goes wrong.

Method 1: Reset Desktop to Default Location

1.Press Windows Key + R then type the following and hit Enter:

C:\users\%username%

2.Right-click on the Desktop folder and select Properties.

3.In Desktop Properties switch to Location tab and click on Restore Default button.

4.Click Apply followed by OK.

5.Reboot your PC to save changes and see if you’re able to Fix Desktop Refers to A Location That Is Unavailable Error.

Method 2: Registry Fix

If the above method doesn’t work out then try this one instead:

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

3.Make sure to select User Shell Folders then in the right window pane double-click on the Desktop.

4.Now in the value data field make sure the value is set to:

%USERPROFILE%\Desktop 

OR

C:\Users\%USERNAME%\Desktop

5.Click OK and close Registry Editor.

6.Reboot your PC to save changes.

Method 3: Copy Desktop Folder Back to Its Location

1.Press Windows Key + R then type the following and hit Enter:

C:\users\%username%

2.See if you can find two Desktop folders, one empty and other with your desktop contents.

3.If you do, then delete the desktop folder which is empty.

4.Now copy the desktop folder which contains your data and navigate to the following location:

C:\Windows\system32\config\systemprofile\

5.When you navigate to the systemprofile folder it will for your permission, simply click Continue to access the folder.

6.Paste the Desktop folder into the systemprofile folder.

7.Restart your PC to save changes and see if you’re able to Fix Desktop Refers to A Location That Is Unavailable Error.

Method 4: Perform System Restore

1.Press Windows Key + R and type”sysdm.cpl” then hit enter.

2.Select System Protection tab and choose System Restore.

3.Click Next and choose the desired System Restore point.

4.Follow the on-screen instruction to complete system restore.

5.After reboot, you may be able to Fix Desktop Refers to A Location That Is Unavailable Error.

Method 5: Create a New User Account

1.Press Windows Key + I to open Settings and then click Accounts.

2.Click on Family & other people tab in the left-hand menu and click Add someone else to this PC under Other people.

3.Click I don’t have this person’s sign-in information in the bottom.

4.Select Add a user without a Microsoft account in the bottom.

5.Now type the username and password for the new account and click Next.

Log in to the new user account then:

1.Open the File Explorer then click on View > Options.

2.Switch to the View tab and checkmark Show hidden files, folders, and drives.

3.Uncheck Hide protected operating system files (Recommended).

4.Click Apply followed by OK.

5.Navigate to the following location:

C:\Users\Old_Username

Note: Here C is the drive on which Windows is installed and Old_Username is the name of your old account username.

6.Select all the files from above folder except the following:

Ntuser.dat
Ntuser.dat.log
Ntuser.ini

7.Now press Windows Key + R then type the following and hit Enter:

C:\users\%username%

Note: This will be your new user account folder.

8.Paste the copied content here and reboot your PC.

Recommended:

• Fix Unable to Set Default Printer Error 0x00000709
• Fix Microphone Not Working on Windows 10
• Remove Candy Crush Soda Saga from Windows 10
• Fix WiFi doesn’t connect automatically in Windows 10

That’s it you have successfully Fix Desktop Refers to A Location That Is Unavailable Error but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Windows 10中的Fix Black Desktop Background

• 修复远程桌面不会在Windows 10中Connect

• Fix Desktop Icons Windows 10创建者更新后继续重新排列

• Windows 10缺少Fix Desktop Icon

• Fix Desktop Window Manager High CPU（DWM.exe）

• Fix Alt+Tab不在Windows 10工作

• Fix NVIDIA Control Panel不开放

• Fix Computer直到重新启动多次

• Fix Windows Computer重新启动而不警告

• Fix Ca没有打开Windows Defender

• Windows 10中Fix Unable至Delete Temporary Files

• Device Manager中的Fix Network Adapter Error Code 31

• Fix Windows的本副本不是真正的错误

• Windows 10中的Fix Desktop Background Changes Automatically

• Fix Windows无法完成格式

• Fix Computer无法识别iPhone

• 9 Ways到Fix Twitter Videos不玩

• Fix BAD_SYSTEM_CONFIG_INFO Error

• Windows 10中的Fix Task Host Window Prevents Shut Down

• 如何Fix PC Won125 POST