一些Windows用户报告了他们的计算机卡在修复磁盘错误的问题，这可能需要一个小时才能完成(Repairing disk errors, This might take an hour to complete)屏幕。它通常是由于硬盘(Hard Disk)问题而发生的。发生磁盘错误的原因有很多，但它们通常是由于物理故障而发生的，例如磁盘划伤或磁盘上的坏扇区。最近，一些用户报告在启动 Windows 时遇到错误消息。
修复磁盘错误，这可能需要一个小时才能完成
什么是修复磁盘错误，这可能需要一个小时？
磁盘错误是硬盘驱动器上的常见体验。它们通常并不重要，只需几分钟即可修复。但有时您可能需要修复需要很长时间的磁盘错误。这是因为您的硬盘驱动器或计算机配置存在另一个问题。但是在你出去购买新硬盘之前，让这篇文章告诉你如何修复需要一个小时的磁盘错误。
Windows卡在修复磁盘错误
发生此错误是因为HDD/SDD可能发生故障。我们将看到修复错误的所有解决方案。
- 等几个小时看看
- 移除所有外部设备
- (Restart)以安全模式(Safe Mode)重新启动并使用CMD运行 chkdsk
- 运行修复音量命令
- 使用系统还原
- 运行自动启动修复
- (Repair)使用安装介质(Installation Media)修复计算机
- 检查并更换您的硬盘
让我们详细谈谈它们。
要执行其中一些操作，您需要启动到安全模式(boot into Safe Mode)或高级启动选项(Advanced Startup Options)屏幕。
1]等待几个小时，看看
您需要先等待几个小时或过夜，因为有时计算机会自动纠正错误。如果您阅读屏幕上出现的错误消息，这有点明显。因此，请等待一段时间，然后再转到下一个解决方案。
2]删除所有外部设备
Windows可能会将外部驱动器检测为系统启动分区，从而导致您的 PC 在启动时崩溃。为避免此问题，您首先需要断开连接到计算机的所有外部驱动器，然后重新启动计算机。现在检查您的电脑在启动后是否可以正常启动。如果可行，请一一重新连接所有外部设备，并检查是哪一个导致了问题。当您发现有故障的设备时，请更换新设备。
相关(Related)：如何在 Windows 中停止或取消 ChkDsk。
3]以安全模式(Safe Mode)重新启动(Restart)并使用CMD运行chkdsk
运行 CHKDSK修复(Run CHKDSK)硬盘(Hard Drive)坏道。如果您知道硬盘(Hard Drive)中有坏扇区，请尝试使用 命令提示符的(Command Prompt)CHKDSK 命令来纠正问题。
我们知道您的计算机没有启动，因此，我们提供了以下步骤来运行该命令。
- 按住 Shift 按钮并选择 Power > Restart.
- 转到Choose an option screen > Troubleshoot > Advanced options > Startup Settings > Restart.
- 现在，选择 安全模式。(Safe Mode.)
- 打开 命令提示符(Command Prompt )并执行以下命令。
chkdsk /f C:
这将运行“C”或系统(System)驱动器的命令。
相关(Related)： ChkDsk stuck at a particular % or hangs at some Stage。
4]运行修复音量命令
您可以使用Windows PowerShell(Windows PowerShell)运行 repair-volume 命令，看看它是否有帮助。这些是您可以用来完成此操作的步骤：
在执行这些步骤之前，请记下外部驱动器的驱动器号。
Repair-Volume drive-letter –Scan
请(Please)在上面的命令行中将“驱动器号”替换为您的原始驱动器号
Repair-Volume drive-letter –OfflineScanAndFix
Repair-Volume drive-letter –SpotFix
- 完成这些步骤后，请等待扫描过程完成。完成后重新启动计算机。
5]使用系统还原
如果您已创建系统还原点(System Restore)，请尝试使用它来解决问题。您可以使用以下步骤来执行此操作。
- 下载 Windows 10 ISO 文件(Download the Windows 10 ISO file)并使用工具使您的 USB 可启动(use a tool to make your USB bootable)。
- 选择 Repair your computer > Troubleshoot > Advanced option > System Restore.
最后，执行系统还原(System Restore)并查看问题是否已解决。
6]运行自动启动修复
如果您没有系统还原点(System Restore)，则可以运行自动启动修复( run Automatic Startup Repair)。为此，您必须先强制关闭(Shutdown)计算机，然后当它再次启动时，按电源按钮将其关闭。重复 2-3 次，您将看到“准备自动修复”(Preparing Automatic Repair” )屏幕。
如果自动修复(Automatic Repair)能够解决问题，它会自动为您解决问题。
7]使用安装媒体(Installation Media)修复操作系统(Repair OS)
如果没有任何效果，您需要做的是使用安装介质修复您的计算机(repair your computer using Installation Media)。
这不会删除您的文件，因此您可以放心地执行此操作。
8]检查并更换硬盘
如果修复不起作用，请尝试检查您的硬盘(Hard Disk)，看看它是否出现故障。不幸的是，如果您的硬盘无法修复，您必须换一个新的。
您可以使用 WMIC 检查 Hard Disk Health(use WMIC to check Hard Disk Health)。但是由于您的计算机没有启动，您必须将硬盘(Hard Disk)插入另一个系统并检查其运行状况。
在Windows 10(Windows 10)中修复磁盘错误需要多长时间？
这通常需要 10-15 分钟，具体取决于磁盘(Disk)大小和状态。但正如您在错误消息本身中看到的那样，可能需要一个小时才能完成 - 但有时，您必须等待一天才能开始故障排除过程。因此，请执行此操作并检查问题是否仍然存在。如果它没有自动修复，您可以参考上述解决方案。
如何修复硬盘错误？
如果您确定硬盘(Hard Disk)出现故障，总有办法解决问题。您可以运行一个命令来纠正该问题。您需要运行 CHKDSK 命令（上述）来修复计算机上的硬盘(Hard Disk)错误。
是什么导致修复磁盘错误？
修复的最常见原因是系统文件损坏或注册表错误。当这些文件损坏时，Windows将无法运行，从而导致弹出错误消息。而且由于Windows 10主要依赖于系统文件，因此当它们被损坏时它很容易出现故障。其他一些常见原因包括恶意软件感染、键盘或鼠标中的键卡住、硬盘驱动器故障。
有关的：(Related:)
- 修复非系统磁盘或磁盘错误黑屏(Fix Non-system disk or disk error Black screen)
- 所选磁盘不是固定 MBR 磁盘消息。
Repairing disk errors, This might take an hour to complete
Some Windows users are reporting an issue in which their computer gеts stuck at Repairing disk errors, This might take an hour to complete screen. It usually occurs due to Hard Disk issues. Disk errors can occur for a number of reasons, but they generally happen due to a physical failure, such as a scratched disc or bad sectors on the disk. Recently some users reported experiencing an error message when they start their Windows.
Repairing disk errors, This might take an hour to complete
What is Repairing disk errors this might take an hour?
Disk errors are a common experience on your hard drive. They’re usually not critical, and they can be fixed in just a few minutes. But sometimes you might need to fix disk errors that take a long time. This is because there’s another problem with your hard drive or the computer’s configuration. But before you go out and buy a new hard drive, let this article show you how to repair disk errors that take an hour.
Windows is stuck on Repairing disk errors
This error occurs because of a potentially failing HDD/SDD. We will be seeing all the solutions to fix the error.
- Wait for a few hours and see
- Remove all external devices
- Restart in Safe Mode and use CMD to run chkdsk
- Run Repair-volume command
- Use System Restore
- Run Automatic Startup Repair
- Repair computer using Installation Media
- Check and replace your Hard Disk
Let us talk about them in detail.
To carry out some of these operations, you need to boot into Safe Mode or to the Advanced Startup Options screen.
1] Wait for a few hours and see
You need to first wait for a few hours or overnight as sometimes, the computer will automatically rectify the error. This is somewhat obvious if you read the error message appearing on your screen. So, wait for some time before moving to the next solution.
2] Remove all external devices
There is a possibility that Windows could detect the external drive as the system boot partition, causing your PC to crash upon booting. To avoid this problem, you first need to disconnect all external drives attached to your computer and then restart your computer. Now check if your PC can boot normally after it starts. If this works, reconnect all your external devices one by one and check which one is causing the problem. When you find the faulty device, replace that with a new one.
Related: How to stop or cancel ChkDsk in Windows.
3] Restart in Safe Mode and use CMD to run chkdsk
Run CHKDSK to repair bad sectors of the Hard Drive. If you know that there are bad sectors in your Hard Drive, try using the CHKDSK command of Command Prompt to rectify the issue.
We know that your computer is not booting, therefore, we have given the following steps to run the command.
- Hold the Shift button and select Power > Restart.
- Go to Choose an option screen > Troubleshoot > Advanced options > Startup Settings > Restart.
- Now, select Safe Mode.
- Open Command Prompt and execute the following command.
chkdsk /f C:
This will run the command for the “C” or System drive.
Related: ChkDsk stuck at a particular % or hangs at some Stage.
4] Run Repair-volume command
You could run the repair-volume command using Windows PowerShell and see if it helps. These are steps you can use to accomplish this:
Before you go to the steps, note down the drive letter of your external drive.
Repair-Volume drive-letter –Scan
Please replace “drive-letter” with your original drive letter in the command line above
- Now run the following commands:
Repair-Volume drive-letter –OfflineScanAndFix
Repair-Volume drive-letter –SpotFix
- Once you complete the steps, wait until the scanning process is complete. Restart your computer when it’s finished.
5] Use System Restore
If you have created a System Restore point, try using it to fix the issue. You can use the following steps to do that.
- Download the Windows 10 ISO file and use a tool to make your USB bootable.
- Select Repair your computer > Troubleshoot > Advanced option > System Restore.
Finally, perform the System Restore and see if the issue is resolved.
6] Run Automatic Startup Repair
If you don’t have a System Restore point, you can run Automatic Startup Repair. To do that, you have to first force Shutdown your computer and then when it starts again, press the power button to shut it down. Do this for 2-3 iterations and you will see the “Preparing Automatic Repair” screen.
If the Automatic Repair is capable of fixing the issue, it will automatically do that you rectify the issue for you.
7] Repair OS using Installation Media
If nothing works, you need to do is repair your computer using Installation Media.
This won’t delete your files, so, you can do that without any worry.
8] Check and replace your Hard Disk
If repairing didn’t work, try checking your Hard Disk, and see if it has malfunctioned. Unfortunately, if your hard disk is irreparable, you have to get a new one.
You can use WMIC to check Hard Disk Health. But since your computer is not booting, you have to plug your Hard Disk into a different system and check its health.
How long does Repairing disk errors take in Windows 10?
It normally takes 10-15 minutes depending on the Disk size and state. But as you can see in the error message itself that it may take an hour to finish – but sometimes, you have to wait for a day before starting the troubleshooting process. So, do that and check if the issue persists. If it does not get fixed automatically, you can refer to the aforementioned solutions.
How do I fix the Hard Disk error?
If you are sure that Hard Disk has malfunctioned, there is always a way to fix the issue. There is a command that you can run to rectify the issue. You need to run the CHKDSK command (aforementioned) to fix the Hard Disk error on your computer.
What causes Repairing disk errors?
The most common cause for repairs is system file corruption or registry error. When these files are corrupted, Windows is unable to run, which causes the error message to pop up. And since Windows 10 is mostly reliant on system files, it’s pretty easy for it to malfunction when they get corrupted. Some other common causes include malware infection, stuck keys in keyboard or mouse, hard drive failure.
Related:
- Fix Non-system disk or disk error Black screen
- The selected disk is not a fixed MBR disk message.
