如果您在购买Windows 混合现实耳机^{(Windows Mixed Reality Headset)}时遇到问题，但混合现实门户^{(Mixed Reality Portal)}应用程序显示最低硬件要求低于要求 - 当您知道事实并非如此时，您可以禁用硬件要求检查^{(Hardware Requirement Checks)}对于混合现实门户应用程序。

Windows 10 是否^{(Does Windows 10)}需要混合现实门户^{(Mixed Reality Portal)}？

使用Windows Mixed Reality^{(Windows Mixed Reality)}需要兼容的耳机和运行Windows 11/10的兼容 PC 。如果您运行的是早期版本的Windows ，则可以通过“开始^(Start)”菜单访问混合现实门户。^{(Mixed Reality Portal)}请记住^(Bear)，PC 硬件要求可能因可用应用程序、功能和内容而异。

禁用混合现实门户^{(Mixed Reality Portal)}应用程序的硬件要求^{(Hardware Requirement Checks)}检查

您可以通过以下两种方式之一禁用或绕过Windows PC 上^(Windows)混合现实门户^{(Mixed Reality Portal)}应用程序的硬件要求检查；

1. 开启开发者模式
2. 修改注册表

让我们看一下与这两种方法相关的过程描述。

1]打开开发者模式

要通过启用开发人员模式禁用或绕过^{(Developer Mode)}Windows PC 上^(Windows)混合现实门户^{(Mixed Reality Portal)}应用程序的硬件要求检查，请执行以下操作：

• 按Windows key + I 打开设置^{(open Settings)}。
• 单击更新和安全^{(Update & Security)}。
• 向下滚动并单击左侧导航窗格中的开发人员。^{(For developers)}
• 在右侧窗格的“开发人员模式”^{(Developer Mode)}部分下，将按钮切换为“打开”以从^(On)任何来源安装应用程序，包括松散文件^{(Install apps from any source, including loose files)}选项。
• 退出设置应用程序。

2]修改注册表

要通过修改注册表在Windows PC 上禁用或绕过^(Windows)混合现实门户^{(Mixed Reality Portal)}应用程序的硬件要求检查，请执行以下操作：

由于这是注册表操作，建议您备份注册表^{(back up the registry)} 或 创建系统还原点作为必要的预防措施。完成后，您可以执行以下操作：

• 按Windows key + R调用“运行”对话框。
• 在“运行”对话框中，键入regedit并按 Enter 以打开注册表编辑器^{(open Registry Editor)}。
• 导航或跳转到下面的注册表项路径：

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Holographic

• 在该位置的左侧导航窗格中，右键单击Holographic文件夹并选择新建^(New)>密钥^(Key)。
• 将密钥重命名为FirstRun。
• 选择新创建的密钥文件夹。
• 现在，右键单击右侧窗格中的空白区域，然后选择新建^(New)> DWORD（32 位）值^{(DWORD (32-bit) Value)} 以创建注册表项
• 然后将密钥重命名为AllowFailedSystemChecks 并按 Enter。
• 双击^{(Double-click)}新条目以编辑其属性。
•  在值^(V)数据^{(alue data)}字段中输入1 。
• 单击确定^(OK)或按 Enter 保存更改。

重新启动混合现实门户^{(Mixed Reality Portal)}应用程序，看看是否可以单击硬件检查页面上的下一步按钮。^(Next)如果没有，请尝试以下操作：

• 仍然在右窗格中，创建另一个DWORD（32 位）值^{(DWORD (32-bit) Value )}并将其命名为 FirstRunSucceeded。
• 双击^{(Double-click)}新条目以编辑其属性。
•  在值^(V)数据^{(alue data)}字段中输入1 。
• 单击确定^(OK)或按 Enter 保存更改。
• 退出注册表编辑器。
• 重启电脑。

启动时，打开混合现实门户^{(Mixed Reality Portal)}应用程序 - 您会注意到不会显示硬件要求检查屏幕。您现在可以使用您的 VR 头戴设备了。

如何禁用Windows Mixed Reality门户？

对于希望在其 Windows 10/11 计算机上禁用Windows Mixed Reality的 PC 用户，可以执行以下操作；打开设置^(Settings)应用程序并选择应用程序^(Apps)。单击应用程序和功能^{(Apps and Features)}，然后选择混合现实门户^{(Mixed Reality Portal)}。现在选择卸载^(Uninstall)选项，Windows将从您的设备中删除该应用程序。

如何更新Windows Mixed Reality？

你可以通过升级到适用于Windows Mixed Reality沉浸式 (VR) 耳机的最新 PC 版本来更新Windows Mixed Reality 。为此，只需打开Settings > Update和安全^(Security)，然后选择检查更新^{(Check for updates)}。

Disable Hardware Requirement Checks for Mixed Reality Portal app

If you’re faced with an issuе where you bought a Windows Mixed Reality Headset but the Mixed Reality Portаl аpp says that the minimum hardware requirements are below requirements – when you know for a fact that it is not, then yoυ may disable Hardware Requirement Checks for Mixed Reality Portal app.

Does Windows 10 need Mixed Reality Portal?

A compatible headset and compatible PC running Windows 11/10 is required to use Windows Mixed Reality. If you’re running an earlier version of Windows, you can access Mixed Reality Portal via the Start menu. Bear in mind that PC hardware requirements may vary for available apps, features and content.

Disable Hardware Requirement Checks for Mixed Reality Portal app

You can disable or bypass hardware requirement checks for Mixed Reality Portal app on Windows PC in either of two ways;

1. Turn on Developer Mode
2. Modify the registry

Let’s see the description of the procedure in relation to the two methods.

1] Turn on Developer Mode

To disable or bypass hardware requirement checks for Mixed Reality Portal app on Windows PC by enabling Developer Mode, do the following:

• Press the Windows key + I to open Settings.
• Click Update & Security.
• Scroll down and click For developers on the left navigation pane.
• On the right pane, under the Developer Mode section, toggle the button to On for Install apps from any source, including loose files option.
• Exit Settings app.

2] Modify the registry

To disable or bypass hardware requirement checks for Mixed Reality Portal app on Windows PC by modifying the registry, do the following:

Since this is a registry operation, it is recommended that you back up the registry or create a system restore point as necessary precautionary measures. Once done, you can proceed as follows:

• Press Windows key + R to invoke the Run dialog.
• In the Run dialog box, type regedit and hit Enter to open Registry Editor.
• Navigate or jump to the registry key path below:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Holographic

• At the location, on the left navigation pane, right-click the Holographic folder and select New > Key.
• Rename the key as FirstRun.
• Select the newly created key folder.
• Now, right-click on the blank space on the right pane and then select New > DWORD (32-bit) Value to create the registry key
• Then rename the key as AllowFailedSystemChecks and hit Enter.
• Double-click on the new entry to edit its properties.
• Input 1 in the Value data field.
• Click OK or hit Enter to save the change.

Relaunch the Mixed Reality Portal app and see if you can click the Next button on the hardware check page. If not, try the following:

• Still on the right pane, create another DWORD (32-bit) Value and name it FirstRunSucceeded.
• Double-click the new entry to edit its properties.
• Input 1 in the Value data field.
• Click OK or hit Enter to save the change.
• Exit Registry Editor.
• Restart PC.

On boot, open the Mixed Reality Portal app – you’ll notice that the hardware requirements check screen won’t be displayed. You can now be able to use your VR headset.

How do I disable Windows Mixed Reality portal?

For PC users that wish to disable Windows Mixed Reality on their Windows 10/11 computer, can do so as follows; open the Settings app and choose Apps. Click on Apps and Features and select Mixed Reality Portal. Now choose the Uninstall option and Windows will remove the app from your device.

How do I update Windows Mixed Reality?

You can update Windows Mixed Reality by upgrading to the latest PC release for Windows Mixed Reality immersive (VR) headsets. To do this, simply open Settings > Update & Security and select Check for updates.

Related posts

• 开启或关闭设置时Mixed Reality Portal正在运行

• 如何在Windows PC Windows Mixed Reality中Record Video

• 如何在 Windows 10 中配置混合现实设置

• 如何在PC上播放Windows Mixed Reality中的Screenshot

• 混合Reality headset & motion controller driver和软件下载

• 类型的键盘硬件与技术Windows PC中

• 最佳Tempered Glass PC案例保护您的Windows computer

• 启用，Disable，Uninstall Mixed Reality; Connect Desktop Microphone

• Drive Windows 10中Drive Properties中的Add或删除Hardware tab

• 如何找出Processor Brand and Model在Windows 10 Laptop

• 如何了解Windows 10/11 PC上有哪些Motherboard？

• 支持Windows 11 operating system的芯片组和主板

• 如何检查RAM speed上Windows 11/10

• 前10名Windows 10台式电脑购买

• View and Interact与Desktop inside Windows Mixed Reality

• 在虚拟现实中举行会议的 4 项服务

• 在Windows Mixed Reality中打开或Off Use Speech Recognition

• 如何打开和Use Windows Mixed Reality Flashlight

• Change Desktop and Windows Mixed Reality Input交换

• 如何在Firefox启用或Disable Mixed Content