如果当您启动Windows计算机时，服务^(Service)没有启动，并且事件ID^{(ID 7000)} 7000、7009 或 7011 记录在Windows 事件日志^{(Windows Event Log)}中，那么这篇文章可能会对您有所帮助。在这篇文章中，我们将提供解决此问题的解决方法。

服务^(Service)未启动–事件 ID^{(– Event ID 7000)} 7000、7009、7011

错误事件可能会以下列格式出现在应用程序日志中：^{(Application)}

活动一^{(Event 1)}

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000

The ServiceName service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.

活动 2^{(Event 2)}

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7011

Description:
Timeout (30000 milliseconds) waiting for a transaction response from the ServiceName service.

活动 3^{(Event 3)}

Event Type: Error
Source: Service Control Manager
Event ID: 7009
Task Category: None

A timeout was reached (30000 milliseconds) while waiting for the ServiceName service to connect.

要变通解决此问题，您需要修改注册表^(Registry)以将服务控制管理器的默认超时值增加到60 秒^{(60 seconds)}。

服务控制管理器在记录事件 7000、7011 或 7009 之前等待由ServicesPipeTimeout条目指定的时间。依赖于Windows 跟踪会话管理器^{(Windows Trace Session Manager)}服务^(Services)的服务可能需要超过 60 秒才能启动。因此，适当增加ServicesPipeTimeout的 值，让所有依赖的服务有足够的时间启动。

相关阅读^{(Related read)}：修复用户注销时的事件 ID 7031 或 7034错误。^{(Event ID 7031 or 7034)}

由于这是注册表操作，您应该先备份注册表^{(back up the registry)}或创建系统还原点，以防程序出错。采取必要的预防措施后，您可以按照以下步骤进行操作。

1. 按Windows键 + R。在“运行”^(Run)对话框中，键入 regedit，然后按 Enter。

2.找到^(Locate)并单击以下注册表子项：

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control

3. 在右窗格中，找到ServicesPipeTimeout 条目。

如果ServicesPipeTimeout条目不存在，您必须创建它。为此，请按照下列步骤操作：

• 单击编辑^(Edit)菜单或右窗格中的空白区域，然后单击新建^(New)> DWORD（32 位）值^{(DWORD (32-bit) Value)}。
• 键入ServicesPipeTimeout，然后按 Enter。

4. 右键单击​​ ServicesPipeTimeout，然后单击 修改^{(Modify )}以编辑其属性。

5.在Base下选择Decimal单选按钮，然后在^{(Decimal )}Value data下键入 60000 。此值表示服务超时之前的时间（以毫秒为单位）。

6. 单击确定^(OK)。

7. 重新启动计算机以使更改生效。

你的问题应该得到解决。
^{(Your issue should be resolved.)}

阅读更多^{(Read more)}：Windows 服务无法启动疑难解答^{(Troubleshoot Windows Services will not start)}。

A Service does not start error with Event ID 7000, 7009, 7011

If when you start your Windows computer, a Service does not start, and event ID 7000, 7009 or 7011 are logged in the Windows Evеnt Log, then this post may be able to help you. In this post, we will offer a workaround to addrеss this іssue.

A Service does not start – Event ID 7000, 7009, 7011

The error events may appear in the Application log in the following format:

Event 1

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000

The ServiceName service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.

Event 2

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7011

Description:
Timeout (30000 milliseconds) waiting for a transaction response from the ServiceName service.

Event 3

Event Type: Error
Source: Service Control Manager
Event ID: 7009
Task Category: None

A timeout was reached (30000 milliseconds) while waiting for the ServiceName service to connect.

To work around this problem, you need to modify the Registry to increase the default time-out value to 60 seconds for the service control manager.

The service control manager waits for the time that is specified by the ServicesPipeTimeout entry before logging event 7000, 7011 or 7009. Services that depend on the Windows Trace Session Manager service may require more than 60 seconds to start. Therefore, increase the ServicesPipeTimeout value appropriately to give all the dependent services enough time to start.

Related read: Fix Event ID 7031 or 7034 error when a user logs off.

Since this is a registry operation, you should first back up the registry or create a system restore point in case the procedure goes wrong. Once you have taken the necessary precautionary measure, you can then proceed as follows.

1. Press Windows key + R. In the Run dialog, type regedit, and hit Enter.

2. Locate and then click the following registry subkey:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control

3. In the right pane, locate the ServicesPipeTimeout entry.

If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:

• Click the Edit menu or an empty space in the right pane, then click New > DWORD (32-bit) Value.
• Type ServicesPipeTimeout, and then hit Enter.

4. Right-click ServicesPipeTimeout, and then click Modify to edit its Properties.

5. Select the radio button for Decimal under Base, then type 60000 under Value data. This value represents the time in milliseconds before a service times out.

6. Click OK.

7. Restart the computer for the changes to take effect.

Your issue should be resolved.

Read more: Troubleshoot Windows Services will not start.

Related posts

• Fix Service Control Manager Event ID 7001在Windows 10上

• Event ID 158错误 - 同磁盘GUIDs assignment在Windows 10

• 用户注销Windows 10计算机时Fix Event ID 7031或7034错误

• 如何在Windows 11/10上修复Event ID 642 ESENT error

• Event ID 307和304在Windows 10设备上使用error code 0x801c001d

• Fix Windows Installer Package错误：Service无法启动

• Windows无法验证数字签名（Code 52）

• Windows Event Log Service未启动或不可用

• Service Host Delivery Optimization High Network，Disk or CPU usage

• Event ID 1098：Error 0xCAA5001C，Token broker操作失败

• Fix Event ID 14和17 - 在Windows 10 TPM command failure

• Windows Wireless Service在此计算机上不运行

• 修复存档以未知格式或损坏错误

• 如何在Windows 10上禁用Windows Insider Service

• Windows Push Notifications User Service已停止工作

• 自动Windows Service | Restart Services Find Dependencies

• 如何修复Event ID 455 ESENT error在Windows 10

• 如何启用触摸Keyboard and Handwriting Panel Service？

• 如何在Windows 10上修复DCOM Event ID 10016错误

• Fix Event ID 454错误 - User Windows 10简介性能问题