如何使用 Malwarebytes Anti-Malware 删除恶意软件： 如今的^{(How to use Malwarebytes Anti-Malware to remove Malware: )}病毒^(Virus)和恶意软件像野火一样蔓延，如果您不防范它们，那么很快它们也会用这种恶意软件或病毒感染您的计算机。最近的一个例子是勒索软件恶意软件，它已经传播到大多数国家并感染了他们的 PC，因此用户被锁定在他们自己的系统之外，除非他们向黑客支付大量费用，否则他们的数据将被删除。

现在恶意软件可以分为三种主要形式，即间谍^(Spywares)软件、广告软件和勒索^(Adwares)软件^(Ransomware)。这些恶意软件的目的有些相同，都是通过一种或另一种方式赚钱。您一定认为您的防病毒软件^(Antivirus)可以保护您免受恶意软件的侵害，但遗憾的是，它并不能作为防病毒软件^(Antivirus)保护病毒，而不是恶意软件，两者之间存在巨大差异。病毒被用来制造问题和麻烦，而恶意软件被用来非法赚钱。

因此，您知道您的防病毒软件^(Antivirus)对恶意软件几乎毫无用处，还有另一个名为Malwarebytes Anti-Malware ( MBAM ) 的程序用于删除恶意软件。该程序是有助于清除恶意软件的高效软件之一，安全专家出于同样的目的依靠该程序。使用MBAM^(MBAM)的最大优势之一是免费且易于使用。此外，它不断更新其恶意软件数据库库，因此它对新出现的恶意软件有很好的保护。

无论如何，不​​要浪费任何时间，让我们看看如何使用Malwarebytes Anti-Malware安装、配置和扫描您的 PC，以便 从您的 PC中删除恶意软件。^(Malware)

如何使用Malwarebytes Anti-Malware删除恶意软件^(Malware)

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

如何安装 Malwarebytes Anti-Malware^{(How to install Malwarebytes Anti-Malware)}

1.首先，访问Malwarebytes 网站^{( Malwarebytes website)}并单击“免费下载”以下载最新版本的Anti-Malware或MBAM。

2. 下载安装文件后，请确保双击 mb3-setup.exe。 这将在您的系统上启动Malwarebytes Anti-Malware ( MBAM ) 安装。

3.从下拉列表中选择您选择的语言，^{(Select the language of your choice from the drop-down)}然后单击确定。

4.在下一个屏幕“欢迎使用 Malwarebytes 设置向导^{(Welcome to the Malwarebytes Setup Wizard)}”中，只需单击下一步。^(Next.)

5.确保在许可协议^{(License Agreement)}屏幕上勾选“我接受协议^{(I accept the agreement)}”，然后单击下一步^(Next)。

6.在设置信息屏幕上^{(Setup Information screen)}，单击下一步^(Next)继续安装。

7.如果要更改程序的默认安装位置，请单击“浏览^(Browse)”，如果没有，请单击“下一步”。^(Next.)

8.在 选择开始菜单文件夹^{( Select Start Menu Folder)}屏幕上，单击下一步^(Next)，然后在 选择附加任务屏幕^{(Select Additional Tasks screen.)}上再次单击下一步。^(Next)

9.现在在准备安装^{(Ready to Install)}屏幕上，它将显示您所做的选择，验证相同，然后单击安装。^{(verify the same and then click on Install.)}

10.单击安装^(Install)按钮后，安装将开始，您将看到进度条。

11.最后，安装完成后点击完成。^(Finish.)

现在您已成功安装 Malwarebytes Anti-Malware ( MBAM )，让我们看看如何使用 Malwarebytes Anti-Malware 从您的 PC 中删除恶意软件。^{(How to use Malwarebytes Anti-Malware to remove Malware from your PC.)}

如何使用 Malwarebytes Anti-Malware 扫描您的 PC^{(How to scan your PC with Malwarebytes Anti-Malware)}

1.在上述步骤中单击完成后，MBAM将自动启动。否则，如果没有，则双击桌面上的 Malwarebytes Anti-Malware快捷方式图标。

2. 启动MBAM后，您将看到类似于下图的窗口，只需单击立即扫描。^{(Scan Now.)}

3.现在在 Malwarebytes Anti-Malware扫描您的 PC时，请注意“威胁扫描”屏幕。^{(Threat Scan)}

4.MBAM完成^(MBAM)扫描您的系统后，将显示威胁扫描结果。^{(Threat Scan Results.)} 确保^(Make)选中不安全的项目，然后单击Quarantine Selected。

5.MBAM 可能需要重新启动^{(a reboot)}才能完成删除过程。如果显示以下消息，只需单击“是”重新启动您的 PC。

6.当 PC 重新启动时，Malwarebytes Anti-Malware将自行启动并显示扫描完成消息。

7.现在，如果您想从系统中永久删除恶意软件，请单击左侧菜单中的隔离区。^(Quarantine)

8.选择所有恶意软件或潜在有害程序 ( PUP )，然后单击删除^(Delete)。

9.重新启动计算机以完成删除^(Removal)过程。

为你推荐：^{(Recommended for you:)}

• 修复 Windows 10 中的桌面图标不断重新排列^{(Fix Desktop Icons Keep Rearranging in Windows 10)}
• 如何修复音频问题 Windows 10 Creators Update^{(How To Fix Audio Problems Windows 10 Creators Update)}
• 修复 Windows 10 创意者更新后桌面图标不断重新排列^{(Fix Desktop Icons keep getting rearranged after Windows 10 Creators Update)}
• 修复创作者更新后丢失的照片或图片图标^{(Fix Missing Photos or Picture Icons after Creators Update)}

就是这样，您已经成功地学习了如何使用 Malwarebytes Anti-Malware^{(How to use Malwarebytes Anti-Malware to remove Malware)}从您的计算机中删除恶意软件，但如果您对本指南仍有任何疑问，请随时在评论部分询问他们。

How to use Malwarebytes Anti-Malware to remove Malware

How to use Malwarebytes Anti-Malware to remove Malware: Virus and malware nowadays spread like wild fires and if you do not protect against them then it won’t take long before they also infect your computer with this malware or viruses. A recent example of this will be the ransomware malware which has spread to most countries and infected their PC so that user is locked out of their own system and unless they pay the hacker a substantial amount their data will be deleted.

Now the malware can be categorized into three major forms which are Spywares, Adwares, and the Ransomware. The purpose of these malware’s is somewhat same which is to earn money by one way or another. You must be thinking that your Antivirus will protect you against malware but sadly it doesn’t as Antivirus protect against viruses, not malware and there a huge difference between the two. Viruses are used in order to cause problems and troubles on the other hand malware are used to illegally earn money.

So as you know your Antivirus is pretty much useless against malware there is another program called Malwarebytes Anti-Malware (MBAM) which is used for malware removal. The program is one of the efficient software which helps in malware removal and security experts count on this program for the same purpose. One of the biggest advantages of using MBAM is that is free and is easy to use. Also, it constantly keeps updating its malware database base, so it has a pretty good protection against new malware’s that comes out.

Anyway, without wasting any time let’s see how to install, configure, and scan your PC with Malwarebytes Anti-Malware in order to remove Malware from your PC.

How to use Malwarebytes Anti-Malware to remove Malware

Make sure to create a restore point just in case something goes wrong.

How to install Malwarebytes Anti-Malware

1.First, go to the Malwarebytes website and click on “Free Download” in order to download the latest version of Anti-Malware or MBAM.

2.Once you have downloaded the setup file, make sure to double click on the mb3-setup.exe. This would start the Malwarebytes Anti-Malware (MBAM) installation on your system.

3.Select the language of your choice from the drop-down and click OK.

4.On the next screen “Welcome to the Malwarebytes Setup Wizard” simply click on Next.

5.Make sure to check mark “I accept the agreement” on the License Agreement screen and click Next.

6.On the Setup Information screen, click Next to continue with the installation.

7.If you want to change the default installation location of the program then click Browse, if not then simply click Next.

8.On the Select Start Menu Folder screen, click Next and then again click Next on Select Additional Tasks screen.

9.Now on the Ready to Install screen it will display the choices you made, verify the same and then click on Install.

10.Once you click the Install button, the installation will start and you will see the progress bar.

11.Finally, once the installation is complete click Finish.

Now that you have successfully install Malwarebytes Anti-Malware (MBAM), let’s see How to use Malwarebytes Anti-Malware to remove Malware from your PC.

How to scan your PC with Malwarebytes Anti-Malware

1.Once you click Finish in the above step, MBAM will launch automatically. Else, if doesn’t then double-click on the Malwarebytes Anti-Malware shortcut icon on the desktop.

2.After you have launched the MBAM, you will see a window similar to the one below, just click Scan Now.

3.Now pay attention to the “Threat Scan” screen while Malwarebytes Anti-Malware scans your PC.

4.When MBAM is finished scanning your system it will display the Threat Scan Results. Make sure to check mark the items which are unsafe and then click Quarantine Selected.

5.MBAM may require a reboot in order to complete the removal process. If it displays the below message, just click on Yes to restart your PC.

6.When the PC restarts the Malwarebytes Anti-Malware will launch itself and will display the scan complete message.

7.Now if you want to permanently delete the malware from your system, then click on Quarantine from the left-hand menu.

8.Select all the malware’s or potentially unwanted programs (PUP) and click Delete.

9.Restart your computer to complete the Removal process.

Recommended for you:

• Fix Desktop Icons Keep Rearranging in Windows 10
• How To Fix Audio Problems Windows 10 Creators Update
• Fix Desktop Icons keep getting rearranged after Windows 10 Creators Update
• Fix Missing Photos or Picture Icons after Creators Update

That’s it you have successfully learned How to use Malwarebytes Anti-Malware to remove Malware from your computer but if you still have any questions regarding this guide then feel free to ask them in the comments section.

Related posts

• Fix Malwarebytes Unable连接Service error

• 免费Malware Removal Tools在Windows 11/10中删除Specific Virus

• 如何防止Malware - 保护Windows 11/10的提示

• 如何Fix PC Won125 POST

• Fix High CPU Usage Service Host：本地系统

• Fix Error 0X80010108在Windows 10中

• 如何在Windows 10中启用或Disable Emoji Panel

• 如何在Windows 10中删除Volume or Drive Partition

• Windows 10 Timeline轻松View Chrome Activity

• 如何在Windows 10上检查PC的规格

• 如何禁用或卸载NVIDIA GeForce Experience

• Windows Fix Host Process Windows Services已停止工作

• Fix Desktop Refers到不可用的位置

• Device Manager中的Fix Network Adapter Error Code 31

• Fix本网站security certificate有问题

• Windows 10中的Fix Black Desktop Background

• Fix NVIDIA Control Panel不开放

• Control Panel在Windows 10中的Hide Items

• 3 Ways至Windows 10中的Increase Dedicated VRAM

• Fix Windows 10 Taskbar未隐藏