当谈到流媒体视频游戏时,大多数玩家倾向于利用Twitch和YouTube。然而,许多流媒体正在将注意力转向Mixer,因为它是一个不断发展的平台,有可能成为下一个大事件。截至目前,Mixer仅适用于 PC 和Xbox One系列游戏机。如果您使用的是 PlayStation 4 或Nintendo Switch,那么您必须利用某些技巧来按预期完成工作。
现在,正如我们最近了解到的那样,一些用户在他们的 Xbox One 视频游戏机上运行Mixer时遇到了问题。(Mixer)弹出一个错误,告诉用户服务无法正常运行,因此,他们必须检查Xbox Live服务状态以更深入地了解正在发生的事情。
这些用户声称他们已经检查了状态并且一切都是绿色的,这表明没有任何问题。对我们来说,这意味着问题出在控制台本身,因此我们将研究如何一劳永逸地纠正问题。
混音器无法在 Xbox One 上运行
如果Mixer无法在Xbox One上启动,我们的建议可能会对您有所帮助:
- 重新启动混音器应用程序
- 重新启动 Xbox One
- 清除 Mac 地址
1]重新启动混音器应用程序(1] Restart the Mixer app)
Mixer应用程序无法在Xbox One上按预期工作的原因可能有很多,因此最好的选择之一是重新启动应用程序,然后测试是否正常工作。
要重新启动应用程序,我们建议将其定位在主(Home)屏幕上,然后使用控制器突出显示它,但不要选择。下一步是按下控制器上的菜单(Menu)按钮,然后单击退出(Quit)(如果存在)。现在,如果Quit没有显示,它只是意味着应用程序没有运行。
2]重新启动Xbox One(2] Restart the Xbox One)
好的,所以重新启动应用程序不起作用,这意味着,是时候重新启动Xbox One本身了。完成这项工作比您想象的要容易,因此请按照说明进行操作,您很快就会成为这方面的大师。
重新启动设备需要用户通过按下控制器上的Xbox 按钮打开(Xbox button)指南(Guide),然后导航到Settings > Restart Console。按(Press)Yes 确认此操作,然后从那里等到重新启动作业完成,然后测试Mixer应用程序以确定一切是否恢复正常。
或者,您可以按住 Xbox 电源按钮(hold the Xbox power button down)10 秒钟以关闭控制台。最后,等待最多 15 秒,然后再次打开。这样做是解决Mixer(Mixer)或任何其他应用程序的大多数问题的可靠方法之一。
3]清除MAC地址(3] Clear MAC address)
在Xbox One(Xbox One)主机上删除您的档案,然后打开设置>?Network > Network设置> Advanced设置 >备用 MAC(Alternate MAC)地址 > 清除> Restart。
然后下载您的Xbox档案并检查它是否有效。
PS:卸载和重新安装Mixer的选项现在不再存在。
这有帮助吗?(Did this help?)
Mixer is not working on Xbox One? This is how to fix it
When it comes down to strеaming video games, most players tend to take advantage of Twitch and YouTube. Howeνer, many streamers are turning their focus to Mixer since it’s a growing platform with the potential to become the next big thing. As of right now, Mixer is only available for PC and the Xbox One family of consoles. If you’re using a PlayStation 4 or Nintendo Switch, then you’ll have to take advantage of certain tricks to get the job done as intended.
Now, as we’ve recently come to understand, some users are having problems running Mixer on their Xbox One video game console. An error is popping up telling users that service isn’t working properly, and as such, they must check the Xbox Live service status for a deeper understanding of what’s happening.
These users claim they’ve checked the status and everything is green, which suggests there’s no problem whatsoever. To us, this means the issue lies with the console itself, so we’re going to look into ways things can be rectified once and for all.
Mixer is not working on Xbox One
If Mixer fails to launch on Xbox One here are our suggestions that may help you:
- Restart the Mixer app
- Restart the Xbox One
- Clear Mac address
1] Restart the Mixer app
Any number of things can be the reason behind the Mixer app failing to work as intended on the Xbox One, so one of the best options is to restart the app and then test if things are working as they should.
To restart the app, we suggest locating it on the Home screen, then highlight it using the controller, but don’t select. The next step then is to press the Menu button on the controller, then click on Quit if it’s present. Now, if Quit is not showing, it simply means the app is not running.
2] Restart the Xbox One
OK, so restarting the app didn’t work, which means, it’s time to restart the Xbox One itself. Getting this done is easier than you might think, so follow the instructions, and you’ll become a master at this in no time.
Restarting the device requires the user to open the Guide by pressing the Xbox button on the controller, then navigate to Settings > Restart Console. Press Yes to confirm this action, and from there, just wait until the restart job is complete, then test the Mixer app to figure out if things are back to normal.
Alternatively, you could hold the Xbox power button down for 10 seconds to turn off the console. Finally, wait for up to 15 seconds before turning it on again. Doing this is one of the sure-fire ways to fix most issues with Mixer or any other app.
3] Clear MAC address
Remove your profile on the Xbox One console and then open Settings> ?Network > Network settings > Advanced settings > Alternate MAC address > Clear > Restart.
Then download your Xbox profile and check if that works.
PS: The option to uninstall and reinstall Mixer now no longer exists.
Did this help?