在某些情况下，在初始Windows 10设置期间配置^{(Windows 10)}OOBE设置时，您可能会收到^(OOBE)出现问题 - OOBESETTINGS^{(Something went wrong – OOBESETTINGS)}消息。在这篇文章中，我们将提供有关如何轻松解决此问题的说明。

当你遇到这个问题。您将收到以下完整的错误消息；

Something went wrong
But you can try again.
OOBESETTINGS

出现此问题的原因是OOBE进程的特定时间会导致死锁情况。此问题不涉及硬件，您可以轻松修复它。

出了点问题 – OOBESETTINGS

首次启动基于 Windows 的新计算机时，Windows 全新体验 (OOBE)^{(Out-Of-Box Experience (OOBE))}过程将指导您完成各种设置操作。在极少数情况下，您可能会在OOBE^(OOBE)期间遇到以下问题之一。

因此，如果您遇到此OOBESETTINGS 错误，您所要做的就是单击 错误屏幕底部的重试按钮。^{(Try again)}通常，这会更正错误，并且OOBE向导可以继续完成设置。

但是，在您再次收到错误的情况下，您必须通过按住电源按钮强制完全关闭系统^{(force a full shut down your system)} ，直到系统关闭。当您再次打开设备电源时，Windows将重新启动并要求您再次配置OOBE设置，因为Windows已安装 - 它只是尚未完成的OOBE 。

Microsoft通过持续更新不断提高Windows 开箱即用体验的弹性。^{(Windows Out-Of-Box-Experience)}随着Microsoft^(Microsoft)识别并解决特定的时间问题，这些问题发生的可能性应该会随着时间的推移而降低。

相关帖子^{(Related posts)}：

• Windows OOBE 失败并出现错误，导致设置不完整^{(Windows OOBE fails with error causing incomplete setup)}
• 修复 OOBEKEYBOARD、OOBELOCAL、OOBEREGION 错误^{(Fix OOBEKEYBOARD, OOBELOCAL, OOBEREGION errors)}。
• 出了点问题，但您可以重试 - MSA 消息。

Something went wrong, OOBESETTINGS during Windows set up

In some cases, you may receive Something went wrong – OOBESETTINGS message while configuring OOBE settings during the initial Windows 10 set up. In this post, we will provide instructions on what you can do to easily resolve this issue.

When you encounter this issue. you’ll receive the following full error message;

Something went wrong
But you can try again.
OOBESETTINGS

This issue occurs because the specific timing of the OOBE process causes a deadlock situation. This issue does not involve hardware, and you can easily fix it.

Something went wrong – OOBESETTINGS

When you start a new Windows-based computer for the first time, the Windows Out-Of-Box Experience (OOBE) process guides you through various setup operations. In rare cases, you may encounter one of the following issues during OOBE.

So, if you’re faced with this OOBESETTINGS error, all you have to do is click on the Try again button at the bottom of the error screen. Usually, this corrects the error and the OOBE wizard can continue to complete the setup.

However, in the case whereby you receive the error again, you have to force a full shut down your system by pressing and holding the power button until the system turns off. When you power on the device again, Windows will simply restart and ask you to configure OOBE settings again as the Windows is already installed – it’s just the OOBE that hasn’t completed yet.

Microsoft is continually improving the resiliency of the Windows Out-Of-Box-Experience through ongoing updates. The chances of these issues occurring should decrease over time as Microsoft identifies and resolves specific timing issues.

Related posts:

• Windows OOBE fails with error causing incomplete setup
• Fix OOBEKEYBOARD, OOBELOCAL, OOBEREGION errors.
• Something went wrong but you can try again – MSA message.

Related posts

• Windows Setup无法配置Windows以在计算机硬件上运行

• Fix Crypt32.dll未找到或缺少Windows 11/10错误

• 如何在Windows 10修复Disk Signature Collision problem

• Event ID 158错误 - 同磁盘GUIDs assignment在Windows 10

• 该PC无法升级到Windows 10由于Parity Storage空间

• LoadLibrary function error Windows 10中的STATUS DLL NOT FOUND

• Windows 10中的Fix ShellExecuteEx错误错误

• Hid.dll在Windows 10中找不到或丢失错误

• NET HELPMSG 2182 BITS service问题

• Setup无法在Windows 10上创建新的system partition error

• 指定的用户没有有效的profile error

• Fix Mirrored Volume重新安装后缺少Windows 11/10

• 在Windows 10中无法检索请求的URL

• Fix Windows Upgrade Error 0xC1900101-0x4000D

• Microsoft Store or Windows Update Error 0x80D05001

• Windows 10中的Fix Problem Event Name BEX64

• Windows 11/10中缺少缺失的错误Fix d3dx dll file

• 用户注销Windows 10计算机时Fix Event ID 7031或7034错误

• Windows 10上的Fix Invalid Depot Configuration Steam Error

• Sorry，我们无法在Windows 10打开Offline file错误