如果您尝试在Windows 10计算机上的Hyper-V上安装Windows 11但遇到不同的问题，这里有一个简单的解决方案来解决其中的一些问题。您必须在 Hyper-V 中启用 TPM^{(enable TPM in Hyper-V)}才能安装Windows 11。即使您的处理器未在官方列表中列出，您也可以使用本教程在Hyper-V上虚拟打开VMTPM 。

由于 Microsoft 更新  了最新版Windows的^(Windows)系统要求^{(system requirements)}，您必须需要Trusted Platform Module 2.0才能安装Windows 11。如果您有一台相当旧的计算机，则您的主板很可能没有该模块。现在，如果您想在不购买新计算机的情况下试用最新版本的Windows ， Hyper-V是您的理想解决方案。

您可以 在 Hyper-V 上安装 Windows 11^{(install Windows 11 on Hyper-V)} 并将其与 Windows 10 一起运行。但是，在Hyper-V上安装^(Hyper-V)Windows 11时，由于未启用TPM ，您可能会遇到一些中断。^(TPM)这就是您应该启用此安全功能以完成工作的原因。

在开始之前，您应该知道在 通过Hyper-V 部署虚拟机时必须选择第 2 代^{(Generation 2)}。否则^(Otherwise)，您将无法获得安装Windows 11所需的选项。

如何在Hyper-V中启用^(Hyper-V)TPM以安装Windows 11

要在Hyper-V中启用TPM以安装Windows 11，请执行以下步骤：

1. 在任务栏^(Taskbar)搜索框中搜索“hyper-v manager” 。
2. 单击^(Click)单个搜索结果。
3. 右键单击^{(Right-click)}虚拟机并选择“ 设置”^(Settings) 选项。
4. 切换到 安全^(Security) 选项卡。
5. 选中启用可信平台模块^{(Enable Trusted Platform Module)} 复选框。
6. 单击确定按钮。

让我们详细检查这些步骤。

首先，您必须在计算机上打开Hyper-V 管理器^{(Hyper-V Manager)}。为此，在任务栏^(Taskbar)搜索框中搜索“hyper-v manager”，然后单击相应的搜索结果。单击左侧的计算机名称后，它会在此处显示所有虚拟机。

如果您可以看到您的虚拟机，请右键单击它并选择“ 设置” ^(Settings )选项。

然后，确保在下拉列表中选择了所需的虚拟机。之后，切换到 安全 ^(Security )选项卡并勾选 启用可信平台模块 ^{(Enable Trusted Platform Module )}复选框。

单击 确定 ^(OK )按钮以保存更改。之后，您可以毫无问题地安装Windows 11 。

Hyper-V 是否支持 TPM？

是的，Hyper-V 支持可信平台模块^{(Platform Module)}或TPM。但是，您必须拥有  第2 代的^{(Generation 2)}UEFI 固件^{(UEFI firmware)}。如果选择第 1 代^{(Generation 1)}或没有UEFI固件，则无法启用TPM。要 检查您的 PC 是否使用 UEFI 或 BIOS，请按照此详细教程进行操作。

TPM在其他虚拟机软件中是否可用？

是的，TPM在其他虚拟机软件中可用，例如VMware、VirtualBox等。但是，与Hyper-V一样，在其他虚拟机软件中启用TPM需要^(TPM)UEFI固件。

阅读： ^(Read: )如何绕过 TPM 要求并安装 Windows 11。^{(How to bypass TPM requirement and install Windows 11.)}

How to enable TPM in Hyper-V to install Windows 11

If you are trying to install Windows 11 on Hyper-V on a Windows 10 computer but getting different problems, here is a simple solution to fix some of them. You have to enable TPM in Hyper-V to install Windows 11. Even if your processor is not listed on the official list, you can turn on VMTPM virtually on Hyper-V using this tutorial.

As Microsoft updated their system requirements for the latest version of Windows, you must need Trusted Platform Module 2.0 to install Windows 11. If you have a pretty old computer, chances are your motherboard doesn’t have the module. Now, if you want to try the latest version of Windows without purchasing a new computer, Hyper-V is a good solution for you.

You can install Windows 11 on Hyper-V and run it alongside Windows 10. However, while installing Windows 11 on Hyper-V, you might get some interruptions due to not having TPM enabled. That is the reason why you should enable this security functionality to get the job done.

Before getting started, you should know that you must select Generation 2 while deploying a virtual machine via Hyper-V. Otherwise, you cannot get the required options to install Windows 11.

How to enable TPM in Hyper-V to install Windows 11

To enable TPM in Hyper-V to install Windows 11, follow these steps:

1. Search for “hyper-v manager” in the Taskbar search box.
2. Click on the individual search result.
3. Right-click on the virtual machine and select the Settings option.
4. Switch to the Security tab.
5. Select the Enable Trusted Platform Module checkbox.
6. Click the OK button.

Let’s check out these steps in detail.

At first, you have to open the Hyper-V Manager on your computer. For that, search for “hyper-v manager” in the Taskbar search box and click on the respective search result. Here it shows all the virtual machines once you click on your computer name on the left side.

If you can see your virtual machine, right-click on it and select the Settings option.

Then, make sure your desired virtual machine is selected in the drop-down list. Following that, switch to the Security tab and tick the Enable Trusted Platform Module checkbox.

Click the OK button to save the change. After that, you can install Windows 11 without any problem.

Does Hyper-V support TPM?

Yes, Hyper-V supports Trusted Platform Module or TPM. However, you must have UEFI firmware with Generation 2. If you select Generation 1 or you do not have UEFI firmware, you cannot enable TPM. To check if your PC is using UEFI or BIOS, follow this detailed tutorial.

Is TPM available in other virtual machine software?

Yes, TPM is available in other virtual machine software such as VMware, VirtualBox, etc. However, like Hyper-V, UEFI firmware is required for enabling TPM in other virtual machine software.

Read: How to bypass TPM requirement and install Windows 11.

Related posts

• 如何在Windows中使用Hyper-V安装Windows 11

• 如何在Windows 10禁用Microsoft Hyper-V

• Hyper-V遇到错误而载入虚拟machine configuration

• Microsoft Hyper-V Server是免费无限评价

• 如何在Hyper-V中导入，导出或克隆虚拟Machines

• 视窗11 Release Date，Price，Hardware Requirements

• Hyper-V虚拟机速度很慢？加速Hyper-V！

• 如何在Windows 11调整Webcam Brightness

• 如何将任何应用程序放到Windows 11中的Taskbar

• 如何在Windows 11启用或禁用动态Refresh Rate（DRR）

• Raw-mode Hyper-V VirtualBox error不可用不可用

• 如何加快Windows 10，使其运行Start，Run，Shutdown faster

• Hyper-V的崩溃或冻结5英寸Windows 11/10计算机

• 安全设置在Hyper-V中呈灰色

• Checkit Tool将告诉您为什么您的PC不支持Windows 11

• 如何签出email account在Mail app在Windows 11

• Windows 11为Business and Enterprise - New功能

• 如何使用PowerShell将VHDX file转换为VHD

• 如何在Windows 11开设Windows Tools

• 如何在Windows 11中隐藏Taskbar Icons上的Badges