如果您尝试在Windows 11/10以管理员身份运行^{(Run as administrator)}上下文菜单选项，但发现它不起作用或以管理员权限打开程序，那么您可能需要执行一些操作。

以管理员身份运行^(Run)选项不起作用或从上下文菜单中丢失^{(Context Menu)}

要解决此以管理员身份运行^{(Run as administrator)}不起作用或丢失的问题，请遵循以下建议：

1. 打开用户帐户控制
2. 清理联系人菜单项
3. 执行 SFC 和 DISM 扫描
4. 更改组成员身份
5. 使用反恶意软件扫描系统
6. 在干净启动状态下进行故障排除
7. 创建一个新的管理员帐户。

1]打开用户帐户控制

如果您尝试以管理员权限打开软件，则会出现UAC或用户帐户控制^{(User Account Control)}提示，您需要在此处确认权限。但是，如果您错误地禁用了UAC或某些恶意软件在未经您同意的情况下执行了此操作，您可能会遇到此问题。因此^(Therefore)，请验证UAC是否已打开。如果没有，请启用用户帐户控制，看看是否有帮助。

2]清理上下文菜单项

使用这些上下文菜单编辑器软件^{(Context Menu Editor software)}之一来删除不需要的上下文菜单项 - 尤其是最近可能添加的那些。

3]执行SFC和DISM扫描

如果某些系统文件已损坏，则可能会发生此问题。因此，请运行系统文件检查器和DISM来修复您的操作系统文件。

4]更改组成员身份

使用您的管理员帐户登录或要求您的管理员执行此操作。如果您有标准用户^{(Standard User)}帐户，请将您的帐户添加到管理员^{(Administrators)} 组^(Group)。

为此，请在任务栏搜索框中搜索netplwiz并打开结果。之后，选择您的用户帐户并单击“属性^{(Properties )}”按钮。

接下来，转到组成员^{(Group Membership )}选项卡 > 选择管理员^{(Administrator)}> 单击应用^(Apply)和确定按钮以保存更改。

然后，重新登录您的计算机并检查“以管理员身份运行”^(Run)选项是否有效。

5]使用反恶意软件扫描系统

有时，由于恶意软件会出现此问题。如果这些解决方案都不适合您，您应该安装反恶意软件并扫描您的整个系统。有很多免费的杀毒软件^{(free antivirus software)}，如Bitdefender、卡巴斯基^(Kaspersky)等，都可以很好地完成。

6]在干净启动状态下进行故障排除

您可以在干净启动状态^{(Clean Boot State)}下进行故障排除，以查看可能导致问题的第三方服务。^(Service)干净启动^(Boot)以最少的驱动程序和启动程序启动系统。当您以干净启动方式启动计算机时，计算机会使用一组预先选择的最少驱动程序和启动程序来启动，并且由于计算机以最少的驱动程序启动，因此某些程序可能无法按预期运行。

7]创建^(Create)一个新的管理员用户^{(Administrator User)}帐户

如果您的标准用户帐户无法使用“以管理员身份运行^(Run)”功能，请尝试创建一个新的管理员用户帐户并检查您是否可以使用相同的用户帐户。您需要使用您的主管理员帐户登录，然后创建另一个管理员帐户并使用它。

如果没有任何帮助，您可能需要使用“重置此电脑^{(Reset This PC)}”选项，确保您选择了保存现有文件和数据的选项。^{(If nothing helps, you may need to use the Reset This PC option, making sure you select the option to save your existing files and data.)}

Run as administrator option not showing or working in Windows 11/10

If you are trying to use the Run as administrator context menu option in Windows 11/10 but find that it is not working or opening the program with administrator privilege, then you may need to carry out a few things.

Run as administrator option not working or missing from Context Menu

To fix this Run as administrator not working or missing issue, follow these suggestions:

1. Turn on User Account Control
2. Clean up Contect Menu items
3. Perform SFC & DISM scans
4. Change Group Membership
5. Scan system with anti-malware
6. Troubleshoot in Clean Boot State
7. Create a new Administrator account.

1] Turn on User Account Control

If you try to open software with administrator privilege, the UAC or User Account Control prompt appears, where you need to confirm the permission. However, if you have disabled UAC by mistake or some malware has done it without your consent, you might face this issue. Therefore, verify if the UAC is turned on or not. If not, enable User Account Control and see if this helps.

2] Clean up Context Menu items

Use one of these Context Menu Editor software to remove unwanted context menu items – especially those whch may have been added in the recent past.

3] Perform SFC & DISM scans

If some system file has got corrupted, this issue can occur. So run the System File Checker as well as DISM to repair your OS files.

4] Change Group Membership

Sign in with your administrator account or ask your administrator to do this. If you have a Standard User account, add your account to the Administrators Group.

To do this, search for netplwiz in the taskbar search box and open the result. After that, select your user account and click the Properties button.

Next, go to Group Membership tab > select Administrator > click Apply and OK buttons to save the change.

Then, re-sign into your computer and check if the Run as administrator option is working or not.

5] Scan system with antimalware

Sometimes this problem occurs due to malware. If none of the solutions are working for you, you should install an antimalware software and scan your whole system. There are many free antivirus software such as Bitdefender, Kaspersky, etc., available which can do a good job.

6] Troubleshoot in Clean Boot State

You can troubleshoot in Clean Boot State to see which third-party Service may be causing the issue. A Clean Boot starts a system with minimal drivers and startup programs. When you start the computer in clean boot, the computer starts by using a pre-selected minimal set of drivers and startup programs, and because the computer starts with a minimal set of drivers, some programs may not work as you expected.

7] Create a new Administrator User account

If your standard user account fails to utilize the ‘Run as administrator’ functionality, try to create a new administrator user account and check if you can use the same or not. You need to sign in with your main admin account and then create another admin account and use it.

If nothing helps, you may need to use the Reset This PC option, making sure you select the option to save your existing files and data.

Related posts

• Run DISM Offline修复Windows 10 System Image backup

• 在Windows 10中使用DISM时，远程procedure call失败了错误

• Background Intelligent Transfer Service不在Windows 11/10工作

• Fix Device encryption在Windows 11/10中暂时暂停错误

• 如何在Windows 10中打开和读取Small Memory Dump（DMP）文件

• 在Windows 10中无法使用您的Phone app接收或拨打电话

• SFC不起作用，不会在Windows 10中运行或无法修复损坏的文件

• Optimize及完善Windows 10 computer performance

• 您的组织已关闭Windows 10中的自动更新

• 视窗10 Get Help应用程序无法正常工作

• Device Manager是空白和不显示任何Windows 11/10

• Audio Service在Windows 11/10上未运行

• 您的PC不支持Miracast - Windows 10错误

• Windows 10安装期间不兼容的Video card错误

• Windows 10的Windows Store Apps Troubleshooter

• LogonUI.exe Application error在Windows 11/10中启动

• Audio在Windows 10中没有响应响应的服务

• 常见VPN error代码的故障排除及对Windows 10解决方案

• 如何解决在Windows 10 WiFi问题

• 已删除的Printer在Windows 10中重新出现并重返