您非常习惯将蓝牙(Bluetooth)耳机与智能手机配对。但是,您是否也想知道如何将它们连接到您的Windows PC?在本指南中,我们将为您提供相同的分步说明。您可以使用 PC上“设置”的“(Settings)设备(Devices)”部分将耳机连接到PC。该过程几乎类似于与智能手机配对的过程。只需单击几下,即可将支持蓝牙的耳机与 Windows 11 或 Windows 10 PC 配对。
在本指南中,我们将向您展示如何将蓝牙耳机连接(connect Bluetooth headphones)到Windows 11/10 PC。如今,随着技术的进步,一切都是无线的。我们使用无线鼠标、键盘、充电适配器等。蓝牙(Bluetooth)扬声器现在风靡一时,因为它们可以方便地消除连接到 PC 的长线。蓝牙(Bluetooth)连接不会降低音频质量。它与有线音频扬声器系统一样好用。让我们看看如何将蓝牙(Bluetooth)扬声器连接到Windows 11/10 PC。
如何将蓝牙(Bluetooth)耳机连接到 Windows 11 PC
要将蓝牙(Bluetooth)耳机连接到 Windows 11 PC:
- 打开设置应用
- 点击蓝牙和设备
- 然后,点击添加设备
- 选择蓝牙
- 然后,点击要添加的设备
让我们进入这个过程的细节。
从“开始(Start)”菜单打开“设置”(Settings)应用程序或使用 PC 上的Win+I键盘快捷键。在设置(Settings)应用程序上,单击左侧面板中的蓝牙和设备选项卡。(Bluetooth & devices)
您将看到配对的蓝牙设备列表以及在(Bluetooth)蓝牙(Bluetooth)和设备下添加新设备的按钮。点击(Click)添加(Add device)设备。
然后,将打开一个添加设备的弹出窗口。单击(Click)蓝牙(Bluetooth)以将蓝牙(Bluetooth)设备添加到您的 PC。
您现在将看到可以连接到您的 PC的可用蓝牙设备列表。(Bluetooth)该列表还可能包含您附近的设备。打开您的设备以确保您的 PC 检测到它。只有这样,您才能在可用设备列表中看到该设备。一旦识别出您的设备,请单击该设备以开始连接。
蓝牙(Bluetooth)耳机连接到 PC后,您将看到连接状态。您可以添加多个蓝牙(Bluetooth)设备,但一次只能使用一个。
如何将蓝牙(Bluetooth)耳机连接到 Windows 10
以下是帮助您将蓝牙(Bluetooth)耳机连接到Windows PC的易于遵循的步骤。
您可以首先确保您知道如何将耳机置于配对模式。
按住电源按钮几秒钟或直到您观察到耳机上的状态指示灯闪烁即可执行此操作。
如果您不确定,可以查看耳机的用户指南或网站以获取设置说明。
现在在Windows 10(Windows 10)中打开设置并按照以下步骤操作:
1]选择开始(Start )从菜单中选择设置(Settings)。它是“开始(Start)”菜单上的齿轮形图标。如果您无法找到“设置”(Settings)应用,您可以在开始菜单搜索框中键入“设置”。(Settings)
2]转到“设备(Devices)”。
3]设备页面打开到。“蓝牙和其他设备(Bluetooth and other devices)”部分。如果没有,请单击左侧窗格中的“蓝牙和其他设备”。(Bluetooth and other devices)
4]确保蓝牙(Bluetooth)已打开。如果未打开,请单击按钮使其变为蓝色。
5] 点击“添加蓝牙或其他设备(Add Bluetooth or other device)”,然后在“添加设备(Add a device)”窗口中点击“蓝牙”。(Bluetooth)
6]将(Place)您的蓝牙(Bluetooth)耳机置于配对模式。
7]几分钟后,耳机将出现在设备列表中。当您查看它时,单击它。
8] 根据耳机的不同,它们可能会立即连接,或者您可能需要输入蓝牙(Bluetooth)密码。如果您看到密码请求,请输入耳机用户指南中提到的密码。大多数时候,使用的密码只是 0000(四个零)。
9]配对完成后,您将在PC上看到一条消息,表明耳机已连接到相同的。您可以单击“完成(Done)”并关闭“设置”(Settings)窗口。
相关阅读:How to set Audio device as default in Windows 11/10
如何让Windows识别我的蓝牙(Bluetooth)耳机?
要让Windows识别您的蓝牙(Bluetooth)耳机,请确保它已打开并且当时未连接到任何其他设备(如移动设备)。当您的设备准备好与 PC 连接时,其上的指示灯会闪烁作为指示。您的 PC 会自动检测到它。
如何将耳机添加到 Windows 11?
如果您的耳机是有线的,您只需将其插入并使用它们。如果您的耳机是无线的,您需要将其添加为蓝牙(Bluetooth)设备才能在您的 Windows PC 上使用它。您可以按照上述流程将耳机连接到Windows 11。
蓝牙(Troubleshoot Bluetooth-enabled)耳机无法配对故障排除
有时在配对蓝牙(Bluetooth)设备时,您可能会遇到以下问题之一:
- 蓝牙图标丢失或无法打开或关闭(Bluetooth icon is missing or it cannot be turned on or off)。
- 蓝牙设备未显示、配对或连接。
- (Bluetooth)安装Windows 10(Windows 10)更新后蓝牙不起作用。
- 蓝牙耳机不工作(Bluetooth Headphones not working)
- 从Windows 8.1(Windows 8.1)或 Windows 7软件升级到 Windows 10 后,它不起作用。
- 未检测到耳机(Headphones not detected)
- 它没有出现在设备管理器(Device Manager)中,并且没有列出任何未知设备。
- 由于计量连接,设置不完整(Setup incomplete because of a metered connection)
以下是解决蓝牙(Bluetooth)配对问题的一些解决方案。
1] 确保耳机在您的Windows PC 的范围内。
2]确保音频正在通过蓝牙(Bluetooth)设备播放。转到开始(Start)>设置(Settings)>系统(System)>声音(Sound)>选择您的输出设备(Choose your output device),选择蓝牙(Bluetooth)设备。
3] 如果您的耳机显示已配对(Paired)但您听不到音频,请确保已连接。
转到开始(Start)>设置(Settings)>设备(Devices)>蓝牙和其他设备(Bluetooth and other devices)。选择设备(Device),然后在蓝牙(Bluetooth)部分中选择连接。(Connect,)
4]您也可以尝试取消配对并修复耳机。
要取消配对设备,请转至设置(Settings)>设备(Devices)>蓝牙和其他设备(Bluetooth and other devices)。选择已配对但无法使用的蓝牙耳机,然后选择移除设备(Remove device)>是(Yes)。再次配对设备。
您可以将蓝牙(Bluetooth)耳机连接到多个设备,例如智能手机和Windows PC。根据蓝牙(Bluetooth)耳机的型号,您可以一次将它们连接到一台设备。
我希望这些说明将指导您进行设置。
How to connect Bluetooth headphones to Windows 11/10 PC
Υou are quite uѕed to pair your Bluetooth headphones wіth уoυr smartphone. But, would you like to know how to connect them to yоur Windows PC as well? In this guide, we will give you step-by-step instructions for the same. You can connect your headphones to your PC υsing the Devices section of the Settings on your PC. The process is almost similar to that of pairing with a smartphone. With just a few clicks, you can pair your Bluetooth-enabled headphones to your Windows 11 or Windows 10 PC.
In this guide, we show you how you can connect Bluetooth headphones to Windows 11/10 PC. Nowadays everything is wireless with the advancement of technology. We use a wireless mouse, keyboard, charging adapters, etc. Bluetooth speakers are a rage now as they give the convenience of eliminating long wires to connect to a PC. The audio quality doesn’t decrease with the Bluetooth connection. It works as well as a wired audio speaker system. Let’s see how we can connect a Bluetooth speaker to Windows 11/10 PC.
How to connect Bluetooth headphones to Windows 11 PC
To connect Bluetooth headphones to Windows 11 PC:
- Open Settings app
- Click on Bluetooth & devices
- Then, click on Add device
- Select Bluetooth
- Then, click on the device to add
Let’s get into the details of the process.
Open the Settings app from the Start menu or use the Win+I keyboard shortcut on your PC. On the Settings app, click on Bluetooth & devices tab in the left side panel.
You will see the list of paired Bluetooth devices along with the button to add new devices under Bluetooth & devices. Click on Add device.
Then, a pop-up window to Add a device opens. Click on Bluetooth to add a Bluetooth device to your PC.
You will now see the list of available Bluetooth devices that can be connected to your PC. The list may also have the devices from your neighborhood. Turn on your device to make sure it is detected by your PC. Then only, you can see that device in the list of available devices. Once, your device is recognized, click on the device to start connecting it.
You will see a connected status once your Bluetooth headphones are connected to the PC. You can add multiple Bluetooth devices, but can only use one at a time.
How to connect Bluetooth headphones to Windows 10
Here are easy-to-follow steps that help you connect the Bluetooth headphones to your Windows PC.
You can begin by ensuring that you know how to put your headphones in the pairing mode.
Do this by pressing the power button for several seconds or until you observe the blinking of the status lights on your headphones.
In case you are not sure, you can check the user guide or website of your headphones for set-up instructions.
Now open Settings in Windows 10 and follow these steps:
1] Select Start to choose Settings from the menu. It is the gear-shaped icon on the Start menu. In case you are unable to find the Settings app, you can type “Settings” in the Start menu search box.
2] Go to “Devices”.
3] The Devices page opens to the. “Bluetooth and other devices” section. In case it does not, click “Bluetooth and other devices” in the pane on the left.
4] Ensure that the Bluetooth is turned on. In case it is not turned on, click on the button so that it turns blue.
5] Click “Add Bluetooth or other device”, and then click on “Bluetooth” in the “Add a device” window.
6] Place your Bluetooth headphones in the pairing mode.
7] After a few minutes, the headphones will appear in the list of devices. When you view it, click on it.
8] Depending on the headphones, they may connect right away, or you may need to enter a Bluetooth passcode. In case you see a passcode request, enter the code mentioned in the headphone’s user guide. Most of the time, the passcode used is just 0000 (four zeros).
9] After the pairing is complete, you will see a message on your PC, indicating that the headphones are connected to the same. You can click “Done” and close the Settings window.
Related read: How to set Audio device as default in Windows 11/10
How do I get Windows to recognize my Bluetooth headphones?
To get Windows to recognize your Bluetooth headphones, please make sure it is turned on and not connected to any other device like mobile at that time. When your device is ready to connect with the PC, the light on it blinks as an indication. Your PC will detect it automatically.
How do I add headphones to Windows 11?
If your headphones is wired, you can just plug it in and use them. If your headphones are wireless, you need to add it as a Bluetooth device to be able to use it on your Windows PC. You can follow the above process to connect your headphones to Windows 11.
Troubleshoot Bluetooth-enabled headphones not pairing
Sometimes while pairing the Bluetooth devices, you may face one of the following problems:
Here are some solutions to troubleshoot Bluetooth pairing issues.
1] Ensure that the headphones are within the range of your Windows PC.
2] Ensure that audio is playing through the Bluetooth device. Go to Start > Settings > System > Sound > Choose your output device, select the Bluetooth device.
3] In case your headphones show Paired but you are unable to hear the audio, ensure that it is connected.
Go to Start > Settings > Devices > Bluetooth and other devices. Select the Device and then select Connect, in the Bluetooth section.
4] You can also try unpairing and repairing the headphones.
To unpair a device, go to Settings > Devices > Bluetooth and other devices. Select the Bluetooth-enabled headphones that are paired but are not working, then select Remove device > Yes. Pair the device again.
You can connect your Bluetooth headphones to multiple devices, like your smartphone and Windows PC. Depending on the model of the Bluetooth headphones, you may be able to connect them to one device at one time.
I hope these instructions will guide you in the setup.