更改命令提示符屏幕缓冲区大小和透明度级别： ^{(Change Command Prompt Screen Buffer Size and Transparency Level: )}命令提示符^{(Command Prompt)}的屏幕缓冲区大小以基于字符单元的坐标网格表示。换句话说，每当您打开命令提示符^{(Command Prompt)}时，您会注意到文本条目下方会有几页空行，这些“空行”是尚未被输出填充的屏幕缓冲区行。Microsoft将屏幕缓冲区的默认大小设置为 300 行，但您可以轻松地将其更改为您喜欢的任何内容。

同样，您也可以通过调整其不透明度来调整命令提示符^{(Command Prompt)}窗口的透明度级别。所有这些设置都可以在命令提示符属性窗口中进行调整，而无需使用任何第三方工具。因此，不要浪费任何时间，让我们看看如何^(How)在下面列出的指南的帮助下更改命令提示符屏幕缓冲区大小^{(Change Command Prompt Screen Buffer Size)}和透明度级别。^{(Transparency Level)}

更改命令提示屏幕缓冲区大小^{(Change Command Prompt Screen Buffer Size)}和透明度级别^{(Transparency Level)}

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：在 Windows 10 中更改命令提示符屏幕缓冲区大小^{(Method 1: Change Command Prompt Screen Buffer Size in Windows 10)}

1.按Windows Key + X然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

2.右键单击^{(Right-click)}​​命令提示符的标题栏并选择^{( title bar)}属性。^{(Properties.)}

3.切换到布局选项卡^{( Layout tab)}，然后在“屏幕缓冲区大小^{(Screen buffer size)}”下对宽度和高度属性进行任何您喜欢的调整。^{(make any adjustments you like for Width and Height attributes.)}

4.完成后，只需单击“确定”并关闭所有内容。

方法 2：在 Windows 10 中更改命令提示符透明度级别^{(Method 2: Change Command Prompt Transparency Level in Windows 10)}

1.按 Windows 键 + X 然后选择命令提示符（管理员）。^{( Command Prompt (Admin).)}

2.右键单击^{(Right-click)}​​命令提示符的标题栏并选择^{( title bar)}属性。^{(Properties.)}

3.确保切换到颜色选项卡^{( Colors tab)}，然后在不透明度下将滑块向左移动以降低不透明度，向右移动以增加不透明度。^{( move the slider to the left to reduce the opacity and to the right to increase the Opacity.)}

4.完成后单击“确定”并重新启动PC。

方法 3：使用“模式”命令更改 Windows 10 中的命令提示符屏幕缓冲区大小^{(Method 3: Change Command Prompt Screen Buffer Size in Windows 10 using “Mode” Command)}

注意：使用此选项设置的^(Note:) 屏幕^(Screen)缓冲区大小只是临时的，一旦您关闭命令提示符，更改就会丢失。

1.按Windows Key + X然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

2.在 cmd 中键入以下命令并按Enter：

模式骗局^{(mode con)}

注意：^(Note:)一旦你按下回车，它将显示设备CON的状态，其中Lines表示高度大小，Columns表示宽度大小。

3.现在要更改命令提示符的当前屏幕缓冲区大小，请^{(change the current screen buffer size of the command prompt)}输入以下命令并按Enter：

mode con:cols=Width_Size lines=Height_Size

注意：^(Note:)将“Width_Size”替换为屏幕缓冲区宽度大小所需的值，将“Height_Size”替换为屏幕缓冲区高度大小所需的值。

For example: mode con:cols=90 lines=30

4.完成后关闭命令提示符。

方法 4：使用键盘快捷键更改 Windows 10 中的命令提示符透明度级别^{(Method 4: Change Command Prompt Transparency Level in Windows 10 using Keyboard Shortcut)}

按 Windows 键 + X，然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}现在同时hold the Ctrl + Shift keys ，然后向上滚动鼠标滚轮以降低透明度，向下滚动鼠标^{( scroll the mouse wheel up to decrease transparency and scroll the mouse)} 滚轮以增加透明度。^{(wheel down to increase the transparency.)}

Decrease transparency: CTRL+SHIFT+Plus (+) or CTRL+SHIFT+mouse scroll up
Increase transparency: CTRL+SHIFT+Minus (-) or CTRL+SHIFT+mouse scroll down

受到推崇的：^{(Recommended:)}

• 在 Windows 10 中启用或禁用鼠标 ClickLock^{(Enable or Disable Mouse ClickLock in Windows 10)}
• 在 Windows 10 中轻松访问颜色和外观^{(Easily Access Color And Appearance In Windows 10)}
• 在 Windows 10 中启用或禁用颜色过滤器^{(Enable or Disable Color Filters in Windows 10)}
• 在 Windows 10 中为命令提示符和 PowerShell 启用或禁用旧版控制台^{(Enable or Disable Legacy Console for Command Prompt and PowerShell in Windows 10)}

就是这样，您已经成功学习了如何在 Windows 10 中更改命令提示符屏幕缓冲区大小和透明度级别，^{(How to Change Command Prompt Screen Buffer Size and Transparency Level in Windows 10)}但是如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

Change Command Prompt Screen Buffer Size and Transparency Level

Change Command Prompt Screen Buffer Size and Transparency Level: The screen buffer size of Command Prompt is expressed in terms of a coordinate grid based on character cells. In other words, whenever you open Command Prompt you will notice there would be several pages worth of empty lines below the text entry and these “empty lines” are the rows of screen buffer that are yet to be filled with the output. The default size of screen buffer is set to 300 lines by Microsoft but you could easily change it to anything you like.

Similarly, you could also adjust the transparency level of the Command Prompt window by adjusting its opacity. All these settings can be adjusted inside the command prompt properties window without using any third party tool. So without wasting any time let’s see How to Change Command Prompt Screen Buffer Size and Transparency Level with the help of the below-listed guide.

Change Command Prompt Screen Buffer Size and Transparency Level

Make sure to create a restore point just in case something goes wrong.

Method 1: Change Command Prompt Screen Buffer Size in Windows 10

1.Press Windows Key + X then select Command Prompt (Admin).

2.Right-click on the title bar of the command prompt and select Properties.

3.Switch to the Layout tab then under “Screen buffer size” make any adjustments you like for Width and Height attributes.

4.Once you’re done simply click OK and close everything.

Method 2: Change Command Prompt Transparency Level in Windows 10

1.Press Windows Key + X then select Command Prompt (Admin).

2.Right-click on the title bar of the command prompt and select Properties.

3.Make sure to switch to Colors tab then under Opacity move the slider to the left to reduce the opacity and to the right to increase the Opacity.

4.Once you’re done click OK and restart your PC.

Method 3: Change Command Prompt Screen Buffer Size in Windows 10 using “Mode” Command

Note: Screen buffer size set using this option will only be temporary and as soon as you close the command prompt the changes will be lost.

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd and hit Enter:

mode con

Note: As soon as you hit Enter, it will display the status for device CON, in which Lines means height size and Columns means width size.

3.Now to change the current screen buffer size of the command prompt enter the following command and hit Enter:

mode con:cols=Width_Size lines=Height_Size

Note: Substitute “Width_Size” with the value you want for the screen buffer width size and “Height_Size” with the value you want for the screen buffer height size.

For example: mode con:cols=90 lines=30

4.Once finished close command prompt.

Method 4: Change Command Prompt Transparency Level in Windows 10 using Keyboard Shortcut

Press Windows Key + X then select Command Prompt (Admin). Now press and hold the Ctrl + Shift keys together and then scroll the mouse wheel up to decrease transparency and scroll the mouse wheel down to increase the transparency.

Decrease transparency: CTRL+SHIFT+Plus (+) or CTRL+SHIFT+mouse scroll up
Increase transparency: CTRL+SHIFT+Minus (-) or CTRL+SHIFT+mouse scroll down

Recommended:

• Enable or Disable Mouse ClickLock in Windows 10
• Easily Access Color And Appearance In Windows 10
• Enable or Disable Color Filters in Windows 10
• Enable or Disable Legacy Console for Command Prompt and PowerShell in Windows 10

That’s it you have successfully learned How to Change Command Prompt Screen Buffer Size and Transparency Level in Windows 10 but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• 清除Clipboard使用Command Prompt or Shortcut

• Windows 10 Start Menu中Replace Powershell Command Prompt

• Windows 10中的Fix Ca不是Change Screen Resolution

• 5 Ways在Windows 10中打开Elevated Command Prompt

• Delete A Folder or File使用Command Prompt（CMD）

• 如何在Boot在Windows 10开设Command Prompt

• Start Menu，Taskbar，Action Center和Windows 10的Change Color

• Windows 10 Hide Email Address Login Screen

• Windows 10上的Fix WORKER_INVALID Blue Screen Error

• Print Screen不在Windows 10工作？ 7 Ways修复它！

• Fix Screen Resolution自身变化

• 有一个Problem向程序发送Command [固定]

• Death Error Fix Blue Screen Windows 10

• Windows 10中的Change Diagnostic and Usage Data Settings

• 在Windows 10中使用Diskpart Clean Command清洁Disk

• 如何Fix Firefox Black Screen Issue

• 修复命令提示符在 Windows 10 上出现然后消失

• 如何在没有Losing Quality的情况下减少PDF File Size

• 如何在Computer Screen上缩小

• Windows 10中的Change Maximum and Minimum Password Age