在Windows 应用商店中安装^{(Windows Store)}应用程序^(Apps)更新时，您突然收到错误“再试一次，出了点问题，错误代码是 0x803F8001，以防万一”，那么您来对地方了，今天我们将讨论如何修复此错误。虽然并非所有应用程序都有此问题，但一两个应用程序会向您显示此错误消息并且不会更新。

起初，它可能看起来像是恶意软件问题，但实际上并非如此，这仅仅是因为Microsoft仍然无法顺利接收更新的过程，并且许多用户在更新 Windows 或Windows 10中的应用程序^(Apps)时仍然遇到各种问题。无论如何^(Anyway)，让我们看看如何使用下面列出的故障排除指南实际修复 Windows 商店错误代码 0x803F8001^{(Fix Windows Store Error Code 0x803F8001)}或0x80072ee7 ，而不会浪费任何时间。^(0x80072ee7)

修复 Windows 应用商店错误代码 0x803F8001^{(Fix Windows Store Error Code 0x803F8001)}

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：确保 Windows 是最新的^{(Method 1: Make sure Windows is up to date)}

1. 按 Windows Key +  I 打开设置，然后单击 更新和安全。^{( Update & Security.)}

2. 从左侧，菜单点击Windows Update。

3. 现在单击“检查更新^{(Check for updates)}”按钮以检查任何可用的更新。

4. 如果有任何更新待处理，请单击下载并安装更新。^{(Download & Install updates.)}

5. 下载更新后，安装它们，您的 Windows 将成为最新版本。

方法二：重新注册Windows Store App^{(Method 2: Re-register Windows Store App)}

1. 在 Windows 搜索中键入Powershell，然后右键单击Windows PowerShell并选择以管理员身份运行。^(Run)

2. 现在在Powershell中输入以下内容并回车：

Get-AppXPackage | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}

3.让上述过程完成，然后重新启动您的PC。

这应该可以修复 Windows Store 错误代码 0x803F8001^{(fix Windows Store Error Code 0x803F8001 )}，但如果您仍然遇到相同的错误，请继续使用下一个方法。  

方法 3：重置 Windows 存储缓存^{(Method 3: Reset Windows Store Cache)}

1. 按 Windows 键 + R 然后输入wsreset.exe 并回车。

2. 运行上述命令，这将重置您的Windows Store缓存。

3. 完成后重新启动 PC 以保存更改。

方法 4：让应用程序使用您的位置^{(Method 4: Let Apps to use your Location)}

1. 按Windows Key + I 打开设置^(Settings)，然后单击隐私。^(Privacy.)

2. 现在，从左侧菜单中选择位置^(Location)，然后启用或打开位置服务。^{( enable or turn on Location Service.)}

3.重新启动您的PC以保存更改，这将 修复Windows Store错误代码0x803F8001。^{( Fix Windows Store Error Code 0x803F8001.)}

方法5：取消选中代理服务器^{(Method 5: Uncheck Proxy Server)}

1. 按 Windows 键 + R 然后输入inetcpl.cpl 并按回车键打开Internet 属性。^{(Internet Properties.)}

2. 接下来，转到连接选项卡^{(Connections tab)}并选择 LAN 设置。

3.取消选中为您的 LAN 使用代理服务器^{(Uncheck Use a Proxy Server for your LAN)}并确保选中“自动检测设置^{(Automatically detect settings)}”。

4. 单击确定^(Ok)然后应用并重新启动您的 PC。

方法 7：运行 DISM 命令^{(Method 7: Run DISM Command)}

1. 按Windows Key + X，然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

2. 试试这些命令 sin 序列：

Dism /Online /Cleanup-Image /StartComponentCleanup
Dism /Online /Cleanup-Image /RestoreHealth

3. 如果上述命令不起作用，请尝试以下操作：

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

注意：^(Note:) 将^(Replace)C:RepairSourceWindows 替换为修复源的位置（Windows 安装^{(Windows Installation)}或恢复光盘^{(Recovery Disc)}）。

4. 重新启动您的 PC 以保存更改。

受到推崇的：^{(Recommended:)}

• 修复 Windows 更新错误代码 0x80072efe^{(Fix Windows Update Error Code 0x80072efe)}
• 修复文件夹视图设置未在 Windows 10 中保存^{(Fix Folder View Settings Not Saving in Windows 10)}
• Aw, Snap! Google Chrome Error
• 修复显示最常用的应用程序设置在 Windows 10 中显示为灰色^{(Fix Show Most Used Apps Setting Is Greyed Out In Windows 10)}

就是这样，您已成功修复 Windows 应用商店错误代码 0x803F8001^{(Fix Windows Store Error Code 0x803F8001)}，但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

Fix Windows Store Error Code 0x803F8001

While installing updatеs for Apps in Windows Store уou suddenly receive the error “Try that again, Something went wrong, The error code is 0x803F8001, in сase you nеed it” then you are at the right place as today we are going to diѕcuss how to fix this error. While not all the apps havе this problem, one or two aрps will show you this error message and won’t update.

While at first, it may look like a malware issue but it’s not, it’s simply because Microsoft is still not able to smooth out the process of receiving updates and many users are still receiving various kind of issues updating their Windows or Apps in Windows 10. Anyway, let’s see how to actually Fix Windows Store Error Code 0x803F8001 or 0x80072ee7 with the below-listed troubleshooting guide without wasting any time.

Fix Windows Store Error Code 0x803F8001

Make sure to create a restore point just in case something goes wrong.

Method 1: Make sure Windows is up to date

1. Press Windows Key + I to open Settings then click on Update & Security.

2. From the left-hand side, menu clicks on Windows Update.

3. Now click on the “Check for updates” button to check for any available updates.

4. If any updates are pending, then click on Download & Install updates.

5. Once the updates are downloaded, install them, and your Windows will become up-to-date.

Method 2: Re-register Windows Store App

1. In the Windows search type Powershell then right-click on Windows PowerShell and select Run as administrator.

2. Now type the following in the Powershell and hit enter:

Get-AppXPackage | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}

3. Let the above process finish and then restart your PC.

This should fix Windows Store Error Code 0x803F8001 but if you’re still stuck on the same error, then continue with the next method.  

Method 3: Reset Windows Store Cache

1. Press Windows Key + R then type wsreset.exe and hit enter.

2. Let the above command run which will reset your Windows Store cache.

3. When this is done restart your PC to save changes.

Method 4: Let Apps to use your Location

1. Press Windows Key + I to open Settings and then click on Privacy.

2. Now, from the left-hand menu, select Location and then enable or turn on Location Service.

3. Reboot your PC to save changes, and this would Fix Windows Store Error Code 0x803F8001.

Method 5: Uncheck Proxy Server

1. Press Windows Key + R then type inetcpl.cpl and hit enter to open Internet Properties.

2. Next, Go to Connections tab and select LAN settings.

3. Uncheck Use a Proxy Server for your LAN and make sure “Automatically detect settings” is checked.

4. Click Ok then Apply and reboot your PC.

Method 7: Run DISM Command

1. Press Windows Key + X then select Command Prompt (Admin).

2. Try these command sin sequence:

Dism /Online /Cleanup-Image /StartComponentCleanup
Dism /Online /Cleanup-Image /RestoreHealth

3. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

4. Reboot your PC to save changes.

Recommended:

• Fix Windows Update Error Code 0x80072efe
• Fix Folder View Settings Not Saving in Windows 10
• Aw, Snap! Google Chrome Error
• Fix Show Most Used Apps Setting Is Greyed Out In Windows 10

That’s it you have successfully Fix Windows Store Error Code 0x803F8001 but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• Fix Windows 10 Store Error Code 0x80072efd

• Fix Windows Store Error Code 0x80240437

• Fix Windows Update Error Code 0x80072efe

• Device Manager中的Fix Network Adapter Error Code 31

• Fix Unable安装Network Adapter Error Code 28

• 修复 Square Enix 错误代码 i2501

• Fix Destiny 2 Error Code Broccoli

• 修复 Windows 10 中的 Windows 应用商店错误 0x803F7000

• 如何Fix Error Code 0x80004005

• 修复 Windows 10 中的 Microsoft Store 错误 0x80073D12

• Fix Windows Store Error 0x80073cf0

• 修复 DISM 错误 14098 组件存储已损坏

• 修复 Zoom 无法连接错误代码 5003

• Fix CD or DVD Drive Error Code 39

• 修复 Windows 应用商店错误 0x80072ee7

• 修复 Windows 10 中的错误代码 0xc0000225

• Fix Windows Store Cache May Be损坏Error

• Fix Error 651：调制解调器（或其他连接设备）报告了错误

• 修复无法在 Google Play 商店安装应用程序错误代码 910

• 8 Ways至Fix Error Code 43在Windows 10上