您的DNS 服务器没有响应^{(DNS server is not responding)}？在这篇文章中，我们将向您展示如何修复您的计算机似乎已正确配置，但设备或资源（DNS 服务器）^{(Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding)}在 Windows 11/10 上没有响应错误。

当您尝试连接到Internet - 但无法连接时，您可以运行网络诊断疑难解答来解决问题。但当时，疑难解答^{(Troubleshooter)}本身可能会抛出以下错误消息：

您的计算机似乎配置正确，但设备或资源（DNS服务器）没有响应

DNS 服务器没有响应

如果您在 Windows 10/8/7 计算机上遇到DNS问题或问题，您可以尝试解决以下问题：^(DNS)您的计算机似乎已正确配置，但设备或资源（DNS 服务器）没有响应^{(Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding)}错误：

1. 手动更改DNS服务器地址^(DNS)
2. 使用备用 DNS
3. ^{(Enter Physical)}在网络^(Network)适配器设置中输入物理地址
4. 禁用防火墙。

修复 DNS 问题和问题

在开始之前，请备份您的路由器设置并更新您的^(Router)路由器^(Router)固件。有关此主题的更多信息，请查看路由器^(Router)手册。

1]手动更改^(Change)DNS服务器地址^(DNS)

首先要尝试的是手动更改DNS服务器地址。按照这些说明 -

转到开始^(Start)并单击控制面板^{(Control Panel)}

打开网络和互联网^{(Network and Internet)}，进入网络和共享中心^{(Network and Sharing Center)}。

单击更改适配器设置。^{(Change adapter settings.)}

现在您将看到网络^(Network)适配器列表。选择您正在使用的网络^(Network)适配器并右键单击它并打开属性。

单击“ Internet Protocol Version 4 (TCP/IPv4) ”

您将看到Internet 协议属性^{(Internet Protocol Properties)}。

选择“使用以下 DNS 服务器地址：^{(Use the Following DNS server address:)} ”

• 输入首选 DNS 地址：    208.67.222.222
• 输入备用 DNS 地址：208.67.220.220

此外，选中退出时验证^(Validate)设置复选框。

单击确定^(OK)，然后退出。

现在您还必须在路由器^(Router)配置中输入相同的DNS地址。您可以参考路由器^(Router)手册了解更多信息。

相关^(Related)：Windows 无法与设备或资源（主 DNS 服务器）通信^{(Windows can’t communicate with the device or resource (Primary DNS Server))}。

2]使用替代DNS

如果这没有帮助，您可以尝试安装和配置OpenDNS，看看是否有帮助。

3]在网络^(Network)适配器设置中输入物理地址^{(Enter Physical)}

我必须提出的下一个建议是在网络适配器设置中输入^(Network)物理^(Physical)地址，看看它是否适合你。

• 转到开始^{(Start )}并输入CMD并按 Enter
• 在命令提示符中输入IPCONFIG /ALL
• 寻找您的网络适配器
• 写下物理地址。^{(Physical Address.)}根据此屏幕截图，在我的情况下它是78-DD-08-F1-DF-B0。
  

现在转到开始并输入NCPA.CPL。右键单击^(Click)您的网络^(Network)适配器并转到Properties。

选择配置。^(Configure.)

然后按照以下步骤 -

1. 单击高级^(Advanced)选项卡并选择网络地址^{(Network address)}
2. 选择单选按钮值^(Value)
3. 输入您之前写下的物理地址（在我的例子中是78-DD-08-F1-DF-B0）当您输入时去掉破折号，即78DD08F1DFB。
4. 点击确定
5. 重新启动系统。

现在查找您的网络^(Network)适配器型号并访问制造商网站并找到适当的驱动程序并更新驱动程序^(Drivers)，看看是否能解决您的问题。

相关^(Related)： 如何解决 Windows 11/10 上的 DNS 问题。

4]禁用你的防火墙

我必须提出的最后一个建议是完全禁用您的防火墙^(Firewall)，看看这是否有助于您的连接。

希望有帮助。

您可能还会对这些资源感兴趣：^{(These resources may also interest you:)}

1. 如何刷新 Windows DNS 缓存^{(How to flush Windows DNS Cache)}
2. 如何在 Windows 中更改 DNS 设置^{(How to change DNS settings in Windows)}
3. 通过更改 DNS 设置管理 Web 浏览速度
4. DNS缓存中毒和欺骗^{(DNS Cache Poisoning and Spoofing)}
5. 检查您的 DNS 设置是否已被盗用。

Computer appears to be correctly configured, but device or resource not responding

Your DNS server is not responding? In this post we will show you how to fix Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding error on Windows 11/10.

When you try to connect to the Internet – but cannot then you may run the Network Diagnostic Troubleshooter to troubleshoot the issue. But at the time, the Troubleshooter itself may throw up the following error message:

Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding

DNS Server is not responding

If you face DNS issues or problems on your Windows 10/8/7 computer, here are a few things you could try to resolve the Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding error:

1. Change the DNS server address manually
2. Use alternative DNS
3. Enter Physical address in the Network adapter setting
4. Disable your Firewall.

Fix DNS issues & problems

Before you begin, backup your Router settings and update the firmware of your Router. Check the Router manual for more information on this subject.

1] Change the DNS server address manually

The first thing to try is to change the DNS server address manually. Follow these instructions-

Go to Start and Click on Control Panel

Open up Network and Internet and go to the Network and Sharing Center.

Click on Change adapter settings.

Now you’ll see the list of Network adapters. Select the Network adapter that you are using and right-click on it and open Properties.

Click on “Internet Protocol Version 4 (TCP/IPv4)”

You’ll see the Internet Protocol Properties.

Select “Use the Following DNS server address:”

• Enter the Preferred DNS address:   208.67.222.222
• Enter the Alternative DNS address: 208.67.220.220

Also, select Validate settings upon exit check-box.

Click OK, and exit.

Now you have to enter the same DNS address in the Router configuration as well. You may refer to the Router manual for more information on this.

Related: Windows can’t communicate with the device or resource (Primary DNS Server).

2] Use alternative DNS

If this does not help, you may try to install and configure OpenDNS and see if that helps.

3] Enter Physical address in the Network adapter setting

The next suggestion I have to make is to enter the Physical address in the Network adapter setting and seeing if that works for you.

• Go to Start and type in CMD and Hit Enter
• In command prompt type in IPCONFIG /ALL
• Look for your network adapter
• Write down the Physical Address. According to this screenshot, it’s 78-DD-08-F1-DF-B0 in my case.
  

Now go to Start and type in NCPA.CPL. Right Click on your Network adapter and go to Properties.

Select Configure.

Then follow these steps-

1. Click on Advanced Tab and select Network address
2. Select the radial button Value
3. Type in the physical address you wrote down before, (In my case it was 78-DD-08-F1-DF-B0) Remove the dashes when you type in, i.e., 78DD08F1DFB.
4. Click OK
5. Reboot the System.

Now look up your Network adapter model and go to the manufactures website and find the appropriate drivers and update the Drivers and see if that resolves your issue.

Related: How to resolve DNS issue on Windows 11/10.

4] Disable your Firewall

The last suggestion I have to make is to disable your Firewall completely and see if that helps your connection.

Hope something helps.

These resources may also interest you:

1. How to flush Windows DNS Cache
2. How to change DNS settings in Windows
3. Manage web browsing speed by changing DNS settings
4. DNS Cache Poisoning and Spoofing
5. Check if your DNS settings have been compromised.

Related posts

• 您的DNS Server可能在Windows 10中不可用

• [Fiddler]网站查找网站失败System.net.sockets.socketException

• 什么是私有DNS and How使用它

• 如何设置免费动态 DNS 以远程访问您的 PC

• Computer坚持准备配置Windows screen

• Windows Server卡在Applying Computer Settings screen

• Computer关闭时冻结或崩溃Programs or Games

• 如何在Xbox One上更改DNS Server设置，使其更快

• Local Computer上的Windows Search Service开始然后停止了

• Public DNS Server Tool为Windows 10免费DNS changer

• DNSLookupView为Windows计算机提供免费DNS Lookup Tool

• 如何设置和使用Cloudflare 1.1.1.1为家庭

• 如何Enable & Configure DNS Aging和Scavenging在Windows Server

• 解决 Chromecast 音频问题的 9 种方法

• 在Firefox启用DNS在HTTPS，Chrome，Edge，Opera，Android，iPhone

• 请求的暂停，继续或停止对此服务无效

• HTTP Error 503，服务不可用的问题

• 个性化设置在Windows 11/10中没有响应

• 无法在Windows 10上更改Static IP address & DNS server

• Computer意外地重新启动或遇到意外错误