TP-Link ID是一个基于云的帐户,您可以在所有TP-Link Wi-Fi 6路由器、网状 Wi-Fi 系统和智能家居设备上使用它。该帐户可与 TP-Link 的移动应用程序(如Tether或Kasa Smart )配合使用,可用于从互联网上的任何位置远程控制您的设备。TP-Link 帐户易于创建和使用,它们对简化您的体验有很大帮助。如果您在创建 TP-Link ID 并将其绑定到您的TP-Link Wi-Fi 6路由器时需要帮助,以下是从 PC 和智能手机完成的方法:
如何从Tether移动应用程序添加或创建 TP-Link ID
创建 TP-Link 帐户的最简单方法之一是使用Tether 应用程序(Tether app)来设置和远程控制您的TP-Link Wi-Fi 6路由器。在您的Android(Android)智能手机或 iPhone上安装该应用程序,然后运行它。执行此操作时,请确保您已连接到 Internet。应用程序一启动,就会要求提供TP-Link ID。如果您已经拥有一个,请接受隐私政策和使用条款,输入您的帐户详细信息,然后按登录(Log in)。
接受 TP-Link 的隐私政策
如果要创建TP-Link帐户,请点击“创建 TP-Link ID 按钮”。(“Create a TP-Link ID button.”)您被告知使用此类 ID 的好处。阅读它们,然后点击Next。
为什么要创建 TP-Link ID
是时候输入您要使用的电子邮件地址和TP-Link ID的密码了。另外,不要忘记接受隐私政策和使用条款,并选择是否要订阅 TP-Link 的时事通讯。然后,点击注册(Sign Up)。
创建 TP-Link ID
您被要求激活您的帐户。激活链接将发送到您的电子邮件地址。在智能手机上打开电子邮件应用程序,点击激活链接,然后返回Tether应用程序。在那里,点击“激活并登录”。(“Activated & Log In.)”
激活您的 TP-Link ID
输入您的(Enter)TP-Link ID的登录信息,然后按登录(Log In)。然后,按照本指南(this guide)中的说明继续设置路由器。在设置过程结束时,Tether应用程序会询问您是否要绑定 TP-Link ID(Bind TP-Link ID)。按BIND NOW,你就完成了。
将您的 TP-Link ID 绑定到您的设备
您现在可以使用智能手机上的Tether应用程序从世界任何地方远程控制您的TP-Link Wi-Fi 6路由器,只要您有可用的互联网连接即可。
如何在初始路由器设置期间添加或创建 TP-Link 帐户
如果您刚刚购买了新的 TP-Link Wi-Fi 6 路由器,并且想从笔记本电脑或 PC 上进行设置,请打开您喜欢的网络浏览器,然后访问tplinkwifi.net或192.168.0.1。此操作会加载 TP-Link 的设置向导,该向导首先要求您为路由器创建管理员密码。阅读本指南以获取有关如何执行初始设置的说明:设置 TP-Link Wi-Fi 6 路由器的 2 种方法(2 ways to set up your TP-Link Wi-Fi 6 router)。在初始设置结束时,您会看到一条成功消息,其中包含有关如何配置路由器的详细信息。按下一步(Next)。
TP-Link快速设置向导末尾的总结(Summary)
然后要求您“获取 TP-Link 云服务”(“Get TP-Link Cloud Service”)并输入您的 TP-Link 帐户的登录信息。如果您已有帐户,请输入您的凭据,然后按登录(Log In)。如果您没有帐户,请单击“注册”(“Sign Up”)链接。
添加您的 TP-Link ID
此操作会将您带到一个屏幕,提示您输入要用于TP-Link(TP-Link)帐户的电子邮件地址及其密码。输入(Enter)必要的信息,同意隐私政策和使用条款,然后按注册(Register)。
创建您的 TP-Link ID
您被告知激活消息已发送到您的电子邮件地址。打开您的收件箱,找到这封电子邮件,然后单击必要的链接。然后,返回TP-Link设置向导,按Login。
激活您的 TP-Link ID
您现在已在 Wi-Fi 6 路由器上使用您的 TP-Link 帐户登录,您可以使用它从智能手机远程控制您的路由器。
提示:(TIP:)如果您希望TP-Link路由器获得最佳性能,最好更新其固件。阅读本指南以了解如何:在 TP-Link Wi-Fi 6 路由器上更新固件的 2 种方法(2 ways to update the firmware on a TP-Link Wi-Fi 6 router)。
如何从网络浏览器创建 TP-Link 帐户或TP-Link ID
如果您想在设置路由器之前创建一个 TP-Link 云帐户或TP-Link ID ,请在您的 PC 上打开您的(TP-Link ID)默认 Web 浏览器(default web browser),然后导航到tplinkcloud.com。在那里,您应该会看到如下所示的登录提示。要创建新的TP-Link帐户,请单击或点击“未注册”。(“Not Registered.”)
TP-Link 云网站
您会看到几个需要填写的字段:TP-Link ID所需的电子邮件地址和密码。输入所需信息,然后按OK。
创建 TP-Link ID
您被要求检查您的电子邮件收件箱以获取激活链接。转到您的收件箱,然后单击或点击发送给您的激活链接。如果您没有看到此电子邮件,请检查垃圾邮件(Spam)文件夹。激活TP-Link ID 后,您可以使用它来绑定您的TP-Link Wi-Fi 6路由器,并在移动应用程序中使用它来远程控制各种TP-Link设备,包括TP-Link Tether应用程序和适用于 Android(Kasa Smart for Android)和iOS的 Kasa Smart 。
初始设置后如何将您的TP-Link ID与您的 Wi-Fi 6 路由器绑定
如果您已经安装了TP-Link Wi-Fi 6 路由器并且初始设置已完成且未将其绑定到TP-Link帐户,您可以稍后进行此连接。为此,请打开网络浏览器,然后转到 tplinkwifi.net 或 192.168.0.1。输入用于管理路由器的本地密码,然后按LOG IN。
登录到您的TP-Link Wi-Fi 6路由器
然后,在 TP-Link 的管理界面中,进入Advanced -> TP-Link ID。在右侧,输入您的TP-Link帐户的登录详细信息,然后按登录(Log In)。
添加您的 TP-Link ID
如果您没有帐户,请单击注册(Sign Up),然后输入您要使用的电子邮件地址和密码。另外,不要忘记激活您的帐户,以便它变得可用。
您如何使用您的 TP-Link ID?
在本指南的最后,您应该拥有一个绑定到您的TP-Link Wi-Fi 6路由器的有效 TP-Link 帐户。在结束之前,请告诉我们一切是否适合您,以及您打算如何使用新创建的 TP-Link ID(TP-Link ID)。你打算用它远程控制什么路由器和其他设备?
How to create and add a TP-Link ID to your TP-Link Wi-Fi 6 router
A TP-Link ID is a cloud-based accoυnt that you can use on all TP-Link Wi-Fi 6 routers, mesh Wi-Fi systems and smart home devices. The account wоrks with TP-Link’s mobile aрps like Tether or Kasa Smart, and it is useful for controlling your devices remotely, from anywhere on the internet. TP-Link accounts are easy to create and use, and they help a lot in making your experience simpler. If you need help creating a TP-Link ID and binding it to your TP-Link Wi-Fi 6 router, here’s how it is done, both from a PC and a smartphone:
How to add or create a TP-Link ID from the Tether mobile app
One of the easiest ways to create a TP-Link account is from the Tether app used to set up and remotely control your TP-Link Wi-Fi 6 router. Install the app on your Android smartphone or iPhone, and then run it. Make sure that you are connected to the internet when you do this. As soon as the app starts, it asks for a TP-Link ID. If you already have one, accept the privacy policy and terms of use, enter the details of your account, and press Log in.
Accept TP-Link's privacy policy
If you want to create a TP-Link account, tap on the “Create a TP-Link ID button.” You are informed about the benefits of using such an ID. Read them, and tap Next.
Why you should create a TP-Link ID
It is time to enter the e-mail address you want to use and the password for your TP-Link ID. Also, don’t forget to accept the privacy policy and the terms of use, and choose whether you want to subscribe to TP-Link’s newsletter. Then, tap on Sign Up.
Creating a TP-Link ID
You are asked to activate your account. An activation link is sent to your email address. Open the email app on your smartphone, tap on the activation link, and then get back to the Tether app. There, tap “Activated & Log In.”
Activate your TP-Link ID
Enter the login information for your TP-Link ID, and press Log In. Then, continue with the router setup, as instructed in this guide. At the end of the setup process, the Tether app asks whether you want to Bind TP-Link ID. Press BIND NOW, and you are done.
Bind your TP-Link ID to your device
You can now use the Tether app on your smartphone to control your TP-Link Wi-Fi 6 router remotely, from anywhere in the world, as long as you have an internet connection available.
How to add or create a TP-Link account during the initial router setup
If you just bought your new TP-Link Wi-Fi 6 router, and you want to set it up from a laptop or PC, open your favorite web browser, and go to tplinkwifi.net or 192.168.0.1. This action loads TP-Link’s setup wizard, which starts by asking you to create an administrator password for your router. Read this guide for instructions on how to perform the initial setup: 2 ways to set up your TP-Link Wi-Fi 6 router. At the end of the initial setup, you are shown a success message, with details about how your router is configured. Press Next.
The Summary at the end of the TP-Link quick setup wizard
You are then asked to “Get TP-Link Cloud Service” and enter the login information of your TP-Link account. If you already have an account, enter your credentials, and press Log In. If you don’t have an account, click the “Sign Up” link.
Add your TP-Link ID
This action takes you to a screen where you are prompted to enter the e-mail address you want to use for your TP-Link account and its password. Enter the necessary information, agree to the privacy policy and terms of use, and press Register.
Create your TP-Link ID
You are informed that an activation message was sent to your email address. Open your inbox, find this email message, and click the necessary link. Then, back in the TP-Link setup wizard, press Login.
Activate your TP-Link ID
You are now logged in with your TP-Link account on your Wi-Fi 6 router, and you can use it to remotely control your router from your smartphone.
TIP: If you want the best performance from your TP-Link router, it is a good idea to update its firmware. Read this guide to learn how: 2 ways to update the firmware on a TP-Link Wi-Fi 6 router.
How to create a TP-Link account or TP-Link ID from a web browser
If you want to create a TP-Link cloud account or TP-Link ID before setting up your router, open your default web browser on your PC, and navigate to tplinkcloud.com. There you should see a login prompt like the one below. To create a new TP-Link account, click or tap on “Not Registered.”
The TP-Link Cloud website
You are shown a couple of fields you need to complete: the e-mail address you want for your TP-Link ID and the password. Enter the required information, and press OK.
Create a TP-Link ID
You are asked to check your email inbox for an activation link. Go to your inbox, and click or tap the activation link that is sent to you. If you don’t see this email message, check the Spam folder too. After you have activated your TP-Link ID, you can use it to bind your TP-Link Wi-Fi 6 router and use it in mobile apps to remotely control all kinds of TP-Link devices, including the TP-Link Tether app and Kasa Smart for Android and iOS.
How to bind your TP-Link ID with your Wi-Fi 6 router after the initial setup
If you have already installed your TP-Link Wi-Fi 6 router and the initial setup was finalized without binding it to a TP-Link account, you can make this connection later. To do that, open a web browser, and go to tplinkwifi.net or 192.168.0.1. Enter the local password used to administer your router, and press LOG IN.
Login to your TP-Link Wi-Fi 6 router
Then, in TP-Link’s administration interface, go to Advanced -> TP-Link ID. On the right, enter the login details for your TP-Link account, and press Log In.
Add your TP-Link ID
If you don’t have an account, click on Sign Up, and enter the email address and password you want to use. Also, don’t forget to activate your account, so that it becomes usable.
How are you using your TP-Link ID?
At the end of this guide, you should have an active TP-Link account that is bound to your TP-Link Wi-Fi 6 router. Before closing, tell us if everything worked well for you and how you plan to use your newly created TP-Link ID. What router and other devices are you going to remotely control with it?