一些用户在执行Windows 10的全新安装时可能会遇到^{(Windows 10)}NVIDIA 显卡驱动程序^{(NVIDIA graphics drivers)}无法继续^{(NVIDIA Installer cannot continue)}或失败的问题。在今天的帖子中，我们将确定此错误的原因，然后提供可能的补救措施。

NVIDIA 安装程序无法继续

在安装过程中，屏幕上会弹出以下错误信息；

The Standard NVIDIA graphics driver is not compatible with this version of Windows. Please update your driver using GeForce Experience to download the correct version.

出现“ NVIDIA Installer cannot continue”问题是因为 GeForce 398.36 DCH显卡驱动 在首次登录后通过 Windows Update自动安装。^{(Windows Update)}

要解决此问题，您可以尝试以下推荐的解决方案。

1. 在操作系统安装期间断开计算机与网络的连接
2. 使用NVIDIA GeForce Experience应用程序解决此问题

在开始之前，首先通过检查 Windows 注册表中是否有名为DCHUVen的值来验证您的 Windows 10 操作系统上是否安装了^(DCHUVen)NVIDIA DCH图形驱动程序。^{(NVIDIA DCH)}

就是这样：

启动注册表编辑器 （按Windows键 + R。在“运行”^(Run)对话框中，键入regedit并按 Enter）。

导航到以下注册表项：

Computer\ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\nvlddmkm

如果DCHUVen值存在，则表示您正在运行NVIDIA DCH驱动程序。

现在您已确认您的计算机上存在NVIDIA DCH图形驱动程序，您可以按照以下步骤将其完全卸载，然后再继续执行推荐的解决方案以避免发生错误。

如果您正常卸载NVIDIA GeForce驱动程序，它不会从系统中消失，直到您重新启动计算机。但是，Windows 更新^{(Windows Update)}将在重新启动后立即启动并重新安装您刚刚卸载的DCH驱动程序。^(DCH)

要正确卸载GeForce图形驱动程序，请执行以下操作：

启动设备管理器^{(Device Manager )}（按Windows键 + X。从菜单中选择设备管理器）。^{(Select Device Manager)}

打开 NVIDIA 图形适配器。

转到Details选项卡并在Property下选择Inf name。然后记下该值。

接下来，以管理员身份运行命令提示符^{(run a command prompt as administrator)}。

将下面的命令复制并粘贴到命令提示符中，然后按 Enter^(Enter)。

pnputil /delete-driver X /uninstall

X是您之前确定的^(X)Inf 名称^{(Inf name )}值的占位符。

卸载并删除驱动包成功后，运行以下命令清除驱动残留。

sc delete nvlddmkm

完成这些步骤后，您现在可以尝试两种解决方案中的任何一种来解决问题。

1]在操作系统安装过程中断开计算机与网络的连接^(Disconnect)

这是避免该问题的最直接有效的方法。在操作系统安装期间断开计算机与网络的连接将阻止操作系统通过Windows 更新安装^{(Windows Update)}GeForce 398.36 DCH显卡驱动程序。并且您需要在网络可用之前从USB介质或驱动程序光盘手动安装驱动程序。^(USB)Windows 更新^{(Windows Update)}不会将任何现有驱动程序替换为DCH驱动程序。

2]使用^(Use)NVIDIA GeForce Experience应用程序解决该问题

GeForce Experience是^{(GeForce Experience)}GeForce GTX显卡 的配套应用程序。您可以通过它获得图形驱动程序的DCH版本，以避免潜在的冲突。因此，使用GeForce Experience应用程序也可以有效避免“ NVIDIA Installer 无法继续^{(NVIDIA Installer cannot continue)}”的问题。

That’s it, folks!

NVIDIA Installer cannot continue on Windows 11/10

Some users may encounter the NVIDIA Installer cannot continue or failed issue with NVIDIA graphics drivers while they are carrying out a fresh install of Windows 10. In today’s post, we will identify the cause of this error and then provide the possible remediation to the issue as well.

NVIDIA Installer cannot continue

The following error message pops up on the screen during the installation process;

The Standard NVIDIA graphics driver is not compatible with this version of Windows. Please update your driver using GeForce Experience to download the correct version.

The “NVIDIA Installer cannot continue” issue occurs because the GeForce 398.36 DCH graphics driver is automatically installed through Windows Update after the first log-on.

To resolve this issue, you can try the recommended solutions below.

1. Disconnect the computer from the network during the OS installation
2. Use the NVIDIA GeForce Experience application to work around the issue

Before you begin, first verify if the NVIDIA DCH graphics driver is installed on your Windows 10 OS by checking if there is a value named DCHUVen in Windows Registry.

Here’s how:

Launch Registry Editor (press Windows key + R. In the Run dialog box, type regedit and hit Enter).

Navigate to the following registry entry:

Computer\ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\nvlddmkm

If the DCHUVen value exists, that means you are running an NVIDIA DCH driver.

Now that you have confirmed that the NVIDIA DCH graphics driver is present on your computer, you can follow the steps below to completely uninstall it before you can proceed with the recommended solution to avoid the error from occurring.

If you uninstall the NVIDIA GeForce driver normally, it won’t be gone from the system until you reboot your computer. However, Windows Update will start immediately after reboot and reinstall the DCH driver that you just uninstalled.

To uninstall the GeForce graphics driver properly, do the following:

Launch the Device Manager (press Windows key + X. Select Device Manager from the menu).

Open the NVIDIA graphics adapter.

Go to the Details tab and select Inf name under Property. Then make a note of the value.

Next, run a command prompt as administrator.

Copy and paste the command below into the command prompt and hit Enter.

pnputil /delete-driver X /uninstall

X is the place-holder for the Inf name value you identified previously.

After uninstalling and deleting the driver package successfully, run the following command to remove the leftovers of the driver.

sc delete nvlddmkm

After completing these steps you can now try any of the two solutions to resolve the issue.

1] Disconnect the computer from network during the OS installation

This is the most direct and effective method to avoid the issue. Disconnecting the computer from the network during the OS installation will block the OS from installing the GeForce 398.36 DCH graphics driver via Windows Update. And you need to manually install the driver from USB media or driver disc before the network is available. Windows Update won’t replace any existing driver with a DCH driver.

2] Use the NVIDIA GeForce Experience application to work around the issue

GeForce Experience is a companion application to your GeForce GTX graphics card. You are able to get a DCH version of the graphics driver via it to avoid potential conflicts. Therefore, using the GeForce Experience application can also be effective in avoiding the “NVIDIA Installer cannot continue” issue.

That’s it, folks!

Related posts

• Windows 10 上的 NVIDIA 安装程序失败错误 [已解决]

• 如何在Windows 10上启用NVIDIA Low Latency Mode

• Remove NVIDIA driver的不需要的单个组件

• 在哪里下载Windows 10的NVIDIA驱动程序

• 此图形驱动程序无法找到兼容的图形硬件

• Windows computer安装图形驱动程序时冻结

• 无法在Windows 11/10上安装Synaptics，ASUS等Touchpad驱动程序

• 如何在Windows 10中禁用Automatic Driver Updates

• 如何在Windows 10上禁用Driver Signature enforcement

• Windows 11/10 Fix Generic PnP Monitor驱动程序问题

• Install and Update Drivers带Snappy Driver Installer

• Unknown Find，download and install Drivers Find Devices或Hardware

• Windows 10上的Fix NVIDIA Drivers Constantly Crash

• 如何在Windows 10查看Wi-Fi Network Driver information

• Device Manager未发现Realtek Network Controller

• 如何修复C++ Runtime Error在NVIDIA GeForce Experience

• AMD，INTEL，NVIDIA Drivers Display Driver Uninstaller

• 已安装的驱动程序未验证此计算机

• [已解决] NVIDIA安装程序无法继续错误

• 如何Windows 11/10与DriverView显示所有设备驱动程序的列表