对于您在Windows 10^{(Windows 10)}中遇到的小故障，最常见的故障排除步骤之一是启动到Windows 10 安全模式。^{(Windows 10 Safe Mode. )}当您以安全模式^{(Safe Mode)}启动 Windows 10 时，您可以诊断操作系统^{(Operating system)}的问题。所有第三方软件都被禁用，只有必要的Windows操作软件才能在安全模式下^(Mode)运行。因此，让我们看看如何以安全模式启动 Windows 10 计算机。^{(So let’s see how you can start your Windows 10 computer in Safe Mode.)}

如何在Windows 10中^{(Windows 10)}启动^(Boot)到安全模式^{(Safe Mode)}

何时使用安全模式？^{(When to use Safe Mode?)}

为了更清楚地了解Windows 10 安全模式^{(Safe Mode)}，您可能需要这样做的原因如下：

1. 当您想解决计算机的小问题时。

2. 当其他解决问题的方法失败时。

3. 确定遇到的问题是否与默认驱动程序、程序或您的 Windows 10 PC 设置有关。

如果问题在安全模式下^{(Safe Mode)}没有出现，那么您可以断定问题是由于计算机上安装了非必要的第三方程序造成的。

4. 如果安装的第三方软件被识别为对Windows操作系统的威胁。您需要以安全模式启动^(Mode)Windows 10才能访问控制^(Control)面板。然后，您可以删除威胁，而不允许它在系统启动期间运行并造成任何进一步的损害。

5. 使用硬件驱动程序和恶意软件修复问题（如果发现），而不影响整个系统。

既然您对Windows 安全模式^{(Windows Safe Mode)}的使用有了一个很好的了解，请阅读下文以了解有关如何在安全模式下启动^(Mode)Windows 10的更多信息。

方法 1：从登录屏幕进入安全模式^{(Method 1: Enter Safe Mode from Log-in Screen)}

如果您由于某种原因无法登录Windows 10 。然后您可以从登录屏幕本身进入安全模式^(Mode)以解决您的计算机问题：

1. 在登录屏幕上，单击电源^(Power)按钮以打开关机和重启^{(Shutdown and Restart)}选项。

2. 接下来，按住Shift键并单击重新启动^(Restart)按钮。

3. Windows 10 现在将在Windows 恢复环境^{(Windows Recovery Environment)}中重新启动。

4. 接下来，单击疑难解答^{(Troubleshoot)}> 高级选项。^{( Advanced options.)}

5. 在新窗口中，点击查看更多恢复选项，^{( See more recovery options, )}然后点击启动设置^{(Startup Settings)}。

注意：^(Note:)如果没有出现更多恢复选项，则直接单击启动设置。^{(Startup Settings.)}

6. 在启动设置^{(Startup Settings)}页面上，单击重新启动^(Restart)。

7. 现在，您将看到一个带有引导选项的窗口。从以下选项中选择任一选项：

• 按F4或4键以安全模式启动^{(Safe Mode.)}Windows 10 PC 。
• 按F5或5键以带网络的安全模式^{(Safe Mode with Networking)}启动计算机。
• 按F6或6键以使用命令提示符启动到安全模式^{(Safe Mode with Command Prompt)}。

8. 按F5 pr 5键启动带网络的^(Networking)安全模式^{(Safe Mode)}。这将允许您即使在安全模式下^{(Safe Mode)}也能连接到互联网。或按F6或6键以启用带有命令提示符的^{(Command Prompt)}Windows 10安全模式^{(Safe Mode)}。

9. 最后，使用具有管理员^{(administrator)}权限的用户帐户登录以在安全^{(log in)}模式下^(Mode)进行更改。

方法 2：使用开始菜单启动到安全模式^{(Method 2: Boot to Safe Mode using Start Menu)}

就像您从登录屏幕进入安全^{(Safe Mode)}模式一样，您也可以使用相同的步骤使用开始菜单^{(Start Menu)}进入安全模式^{(Safe Mode)}。请按照以下说明进行操作：

1. 单击开始^(Start)/按Windows键，然后单击电源^(power)图标。

2.在接下来的步骤中按住 Shift 键。^{(Shift key)}

3. 最后，单击重新启动^(Restart)，如突出显示的那样。

4. 在现在打开的选择一个选项^{(Choose an option)}页面上，单击疑难解答^{(Troubleshoot)}。

5.现在按照上述方法中的步骤4 -8^{(steps 4 -8)}以安全模式启动^(Mode)Windows 10。

另请阅读：^{(Also Read:)} 在安全模式下修复计算机崩溃^{(Fix Computer crashes in Safe Mode)}

方法 3：在引导时以安全模式启动 Windows 10^{(Method 3: Start Windows 10 in Safe Mode while Booting)}

 如果正常启动顺序中断 3 次，Windows 10 将进入自动修复模式。^{(Automatic Repair mode)}从那里，您可以进入安全模式^(Mode)。按照此方法中的步骤了解如何在启动时以安全模式启动Windows 10。

1. 在您的计算机完全关闭的情况下，打开它^{(turn it on)}。

2. 然后，在计算机启动时，按住计算机上的电源按钮^{(Power button)}4 秒以上以中断进程。

3. 再重复以上步骤 2 次，进入Windows 自动修复^{(Automatic Repair)}模式。

4. 接下来，选择具有管理^{(administrative)}权限的帐户。^(account)

注意：^(Note:) 如果启用或出现提示，请输入您的密码。^(password)

5. 您现在将看到一个带有诊断您的 PC 消息的屏幕。^{(Diagnosing your PC. )}等到该过程完成。

6. 在出现的新窗口中单击高级选项。^{(Advanced options )}

8. 接下来，单击疑难解答^{(Troubleshoot)}。

9. 在此，按照方法 1^{(Method 1)}中所述的步骤 4-8^{(steps 4-8)}在Windows 10 PC上启动安全模式。^{(Safe Mode)}

方法 4：使用 USB 驱动器启动到安全模式^{(Method 4: Boot to Safe Mode using USB Drive)}

如果您的 PC 根本不工作，那么您可能需要在另一台工作的Windows 10计算机上创建 USB 恢复驱动器。^{( have to create a USB recovery drive)}创建USB恢复驱动器后，使用它启动第一台Windows 10 PC。 

1. 将USB 恢复驱动器^{(USB Recovery drive)}插入Windows 10台式机/笔记本电脑。

2. 接下来，启动^(boot)您的 PC 并在启动时按键盘上的任意键^{(press any key)}。

3. 在新窗口中，选择您的语言^(language)和键盘布局^{(keyboard layout)}。

4. 接下来，在Windows 设置^{( Windows Setup )}窗口中单击修复您的计算机。^{(Repair your computer)}

5. Windows 恢复环境^{(Windows Recovery Environment)}将像以前一样打开。

6. 只需按照方法 1^{(Method 1)}中所述的步骤 3 - 8^{(steps 3 – 8)}从USB恢复驱动器以安全模式^(Mode)启动Windows 10 。

方法 5：使用系统配置启动 Windows 10 安全模式^{(Method 5: Start Windows 10 Safe Mode using System Configuration)}

您可以使用Windows 10 上的系统配置^{(System Configuration)}应用程序在安全模式下^(Mode)轻松启动。

1. 在Windows 搜索^{(Windows search)}栏中，键入系统配置。

2. 点击搜索结果中的系统配置^{(System Configuration)}，如下图。

3. 接下来，单击系统配置^{(System Configuration)}窗口中的引导^(Boot)选项卡。然后，选中引导选项^{(Boot options)}下安全引导^{(Safe boot)}旁边的框，如图所示。

4. 单击确定^(OK)。

5. 在弹出的对话框中，单击重新启动^(Restart) 以安全模式启动 Windows 10。

另请阅读：^{(Also Read:)} 在 Windows 10 中退出安全模式的 2 种方法^{(2 Ways to Exit Safe Mode in Windows 10)}

方法 6：使用设置以安全模式启动 Windows 10^{(Method 6: Start Windows 10 in Safe Mode using Settings)}

进入Windows 10 安全模式^{(Safe Mode)}的另一种简单方法是通过Windows 10 设置^(Settings)应用程序。 

1.通过单击开始^(Start)菜单中的齿轮图标启动^{(gear icon)}设置应用程序。^(Settings)

2. 接下来，单击更新和安全^{( Update and Security )}，如图所示。

3. 从左窗格中，单击恢复。^(Recovery.)然后，单击Advanced Startup下的Restart Now。请参阅给定的图片。

4. 如前所述，单击疑难解答^{(Troubleshoot)}并按照方法 1^{(Method 1)}中的说明执行步骤 4 - 8^{(steps 4 – 8)}。

这将以安全^(Safe)模式启动您的Windows 10 PC 。

方法 7：使用命令提示符在 Windows 10 中启动到安全模式^{(Method 7: Boot to Safe Mode in Windows 10 Using Command Prompt)}

如果您想要一种快速、简单且智能的方式进入Windows 10 安全模式^{(Safe Mode)}，请按照给定的步骤使用命令提示符^{(Command Prompt)}实现此目的。

1. 在Windows 搜索^{(Windows search)}栏中搜索命令提示符。

2. 右键单击​​命令提示符^{( Command Prompt)}，然后选择以管理员身份运行^{(run as administrator)}，如下图所示。

3. 现在，在命令行窗口^{(Command Window)}中键入以下命令 ，然后按Enter：

bcdedit /set {default} safeboot minimal

4. 如果您想通过网络将Windows 10启动到安全模式，请改用以下命令：

bcdedit /set {current} safeboot network

5. 几秒钟后您将看到一条成功消息，然后关闭命令提示符。

6. 在下一个屏幕（选择一个选项^{(Choose an option)}）上单击继续。^(Continue.)

7. PC 重新启动后，Windows 10 将进入安全模式。^{( Windows 10 will start into Safe Mode.)}

要恢复正常启动，请遵循相同的步骤，但请改用以下命令：

bcdedit /deletevalue {default} safeboot

受到推崇的：^{(Recommended:)}

• 在 Windows 10 中退出安全模式的 2 种方法^{(2 Ways to Exit Safe Mode in Windows 10)}
• 如何在 Windows 10 的启动菜单中添加安全模式^{(How to Add Safe Mode to Boot Menu in Windows 10)}
• 修复在 Windows 10 上未检测到显卡^{(Fix Graphics Card Not Detected on Windows 10)}
• 修复 0xc00007b 错误：应用程序无法正确启动^{(Fix 0xc00007b Error: The Application Was Unable To Start Correctly)}

我们希望本指南对您有所帮助，并且您能够进入 Windows 10 安全模式^{(enter Windows 10 Safe Mode)}。让我们知道哪种方法最适合您。如果您对本文有任何问题或建议，请随时在评论部分提出。

How to Boot to Safe Mode in Windows 10

One of the moѕt common troubleshooting steps for minor glitches that yoυ encounter in Windows 10 is booting to Windows 10 Safe Mode. When you boot Windows 10 in Safe Mode, you can diagnose problems with the Operating system. All third-party software is disabled, and only essential Windows operating software will function in Safe Mode. So let’s see how you can start your Windows 10 computer in Safe Mode.

How to Boot to Safe Mode in Windows 10

When to use Safe Mode?

To get a clearer idea about Windows 10 Safe Mode, here are the reasons why you may need to do so:

1. When you want to troubleshoot minor problems with your computer.

2. When other methods to fix an issue have failed.

3. To determine if the problem being faced is related to default drivers, programs, or your Windows 10 PC settings.

If the issue does not turn up in Safe Mode, then you can conclude that the problem occurs due to non-essential third-party programs installed on the computer.

4. If an installed third-party software is identified as a threat to the Windows operating system. You need to start Windows 10 in Safe Mode to access the Control panel. You can then remove the threat without allowing it to run during system startup and cause any further damage.

5. To fix the issues, if any found, with hardware drivers and malware, without affecting your whole system.

Now that you have a good idea about the uses of Windows Safe Mode read below to know more on how to start Windows 10 in Safe Mode.

Method 1: Enter Safe Mode from Log-in Screen

If you’re not able to log into Windows 10 for some reason. then you can enter Safe Mode from the log-in screen itself to fix issues with your computer:

1. On the log-in screen, click on the Power button to open the Shutdown and Restart options.

2. Next, press the Shift key and hold it while you click on the Restart button.

3. Windows 10 will now restart in Windows Recovery Environment.

4. Next, click on Troubleshoot > Advanced options.

5. In the new window, click on See more recovery options, and then click on Startup Settings.

Note: If see more recovery options do not appear, then directly click on Startup Settings.

6. On the Startup Settings page, click on Restart.

7. Now, you will see a window with boot options. Choose any one option from the following:

• Press the F4 or 4 key to start your Windows 10 PC in Safe Mode.
• Press the F5 or 5 key to start your computer in Safe Mode with Networking.
• Press the F6 or 6 key to boot to Safe Mode with Command Prompt.

8. Press F5 pr 5 key to start Safe Mode with Networking. This will allow you to connect to the internet even in Safe Mode. Or press the F6 or 6 key to enable Windows 10 Safe Mode with Command Prompt.

9. Finally, log in with a user account that has administrator privileges to make changes in Safe Mode.

Method 2: Boot to Safe Mode using Start Menu

Just like you entered Safe Mode from the log-in screen, you can use the same steps to enter Safe Mode using Start Menu as well. Do as instructed below to do so:

1. Click on the Start/press Windows key and then click the power icon.

2. Press the Shift key and keep holding it during the next steps.

3. Lastly, click on Restart as shown highlighted.

4. On the Choose an option page that now opens, clicks on Troubleshoot.

5. Now follow steps 4 -8 from the above method to start Windows 10 in Safe Mode.

Also Read: Fix Computer crashes in Safe Mode

Method 3: Start Windows 10 in Safe Mode while Booting

Windows 10 will enter Automatic Repair mode if the normal boot sequence is interrupted three times. From there, you can enter Safe Mode. Follow the steps in this method to learn how to start Windows 10 in Safe mode while booting.

1. With your computer completely turned off, turn it on.

2. Then, while the computer is booting, press the Power button on your computer for more than 4 seconds to interrupt the process.

3. Repeat the above step 2 more times to enter Windows Automatic Repair mode.

4. Next, select the account with administrative privileges.

Note: Enter your password if enabled or prompted.

5. You will now see a screen with the message Diagnosing your PC. Wait till the process is completed.

6. Click on Advanced options on the new window that appears.

8. Next, click on Troubleshoot.

9. Hereon, follow steps 4-8 as explained in Method 1 to launch Safe Mode on Windows 10 PCs.

Method 4: Boot to Safe Mode using USB Drive

If your PC is not working at all, then you may have to create a USB recovery drive on another working Windows 10 computer. Once the USB recovery drive is created, use it to boot the first Windows 10 PC. 

1. Plug the USB Recovery drive into the Windows 10 desktop/laptop.

2. Next, boot your PC and press any key on the keyboard while it is booting.

3. In the new window, select your language and keyboard layout.

4. Next, click on Repair your computer in the Windows Setup window.

5. Windows Recovery Environment will open as before.

6. Just follow steps 3 – 8 as explained in Method 1 to boot Windows 10 in Safe Mode from the USB recovery drive.

Method 5: Start Windows 10 Safe Mode using System Configuration

You can use System Configuration app on your Windows 10 to easily boot in Safe Mode.

1. In the Windows search bar, type system configuration.

2. Click on System Configuration in the search result as shown below.

3. Next, click on the Boot tab in the System Configuration window. Then, check the box next to Safe boot under Boot options as depicted.

4. Click on OK.

5. In the pop-up dialogue box, click on Restart to boot Windows 10 in Safe Mode.

Also Read: 2 Ways to Exit Safe Mode in Windows 10

Method 6: Start Windows 10 in Safe Mode using Settings

Another easy way to enter Windows 10 Safe Mode is via Windows 10 Settings app. 

1. Launch the Settings app by clicking on the gear icon in the Start menu.

2. Next, click on Update and Security as shown.

3. From the left pane, click on Recovery. Then, click on Restart Now under Advanced Startup. Refer to the given pic.

4. As earlier, click on Troubleshoot and follow steps 4 – 8 as instructed in Method 1.

This will start your Windows 10 PC in Safe mode.

Method 7: Boot to Safe Mode in Windows 10 Using Command Prompt

If you want a quick, easy, and smart way to enter Windows 10 Safe Mode, then follow the given steps to achieve this using Command Prompt.

1. Search for the command prompt in the Windows search bar.

2. Right-click on Command Prompt and then select run as administrator, as shown below.

3. Now, type the following command in Command Window and then press Enter:

bcdedit /set {default} safeboot minimal

4. If you want to boot Windows 10 into safe mode with network, use this command instead:

bcdedit /set {current} safeboot network

5. You will see a success message after few seconds then close the command prompt.

6. On the next screen (Choose an option) click Continue.

7. After your PC restarts, Windows 10 will start into Safe Mode.

To get back to normal boot, follow the same steps, but use this command instead:

bcdedit /deletevalue {default} safeboot

Recommended:

• 2 Ways to Exit Safe Mode in Windows 10
• How to Add Safe Mode to Boot Menu in Windows 10
• Fix Graphics Card Not Detected on Windows 10
• Fix 0xc00007b Error: The Application Was Unable To Start Correctly

We hope that this guide was helpful and you were able to enter Windows 10 Safe Mode. Let us know which method worked for you the best. If you have any questions or suggestions regarding this article, feel free to drop them in the comments section.

Related posts

• 如何在 Windows 10 的启动菜单中添加安全模式

• 在 Windows 10 中退出安全模式的 2 种方法

• 如何在Safe Mode中Boot Mac

• 5 Ways以Safe Mode启动您的电脑

• Fix Computer Wo在Windows 10中没有转到Sleep Mode

• 如何在Windows 10启用AHCI Mode

• 如何更改 Windows 10 启动徽标

• 在安全模式下修复计算机崩溃

• 在Windows 10中创建Full System Image Backup [终极指南]

• 如何在Windows 10执行Clean Boot

• 在Windows 10中启用或禁用Developer Mode

• Windows 10中的Mouse Pointer Lags [已解决]

• Fix Alt+Tab不在Windows 10工作

• 如何在Windows 10启用有源Directory

• Windows 10中的Fix Black Desktop Background

• Windows 10中Fix Unable至Delete Temporary Files

• 如何禁用Windows 10 Firewall

• 3 Ways至Add Album Art至Z86152至Windows 10中的MP3

• 为什么你需要在Windows 10中禁用Fast Startup？

• Windows 10中的Fix Task Host Window Prevents Shut Down