要在配备 LTE Advanced 的Surface Pro(Surface Pro)(第 5 代)、配备 LTE Advanced 的Surface Go或Surface Pro X上获得蜂窝数据连接,您需要在开始之前从移动运营商处获得nano SIM 卡。(SIM)在今天的帖子中,我们将说明如何在Surface设备上插入SIM卡并设置数据连接。这些说明适用于 Windows 10设备和Surface。
如何将SIM卡插入 Surface
(Surface Pro)配备LTE Advanced的(LTE Advanced)Surface Pro(第 5代(Gen))
1. 将配备LTE Advanced的(LTE Advanced)Surface Pro(第 5代(Gen))面朝下,轻轻拉出支架。支架背面有Microsoft徽标。(Microsoft)
2. 从Surface Pro(Surface Pro)包装盒内信封顶部的说明卡中取出SIM弹出工具。
3.在配备LTE Advanced的(LTE Advanced)Surface Pro(第 5代(Gen))的右下角和支架下方找到您的SIM卡托盘。
4. 将SIM 卡(SIM)弹出工具插入小孔中,轻轻按下以弹出SIM卡托。完成后,将SIM 卡(SIM)弹出工具滑回说明卡,以便稍后再次找到它。
[图片来源-微软]
5. 从插槽中取出SIM卡托盘。取下时,请保持正面朝上。
6. 将SIM卡正面朝上放入SIM卡托盘。确保(Make)SIM卡一角的小槽口与SIM卡托盘中的小槽口相匹配,以便正确安装。SIM卡上的文字或标志应朝上。
7. 将SIM卡托盘滑回SIM卡插槽,直至听到咔嗒声。SIM卡托上的小孔应该最靠近右下角。确保(Make)SIM卡托盘顺利滑入 - 不要用力。
Microsoft 还提供了一个简短视频(short video),介绍如何在Surface Pro设备中安装SIM卡。
如何在配备LTE Advanced的(LTE Advanced)Surface Go中安装(Surface Go)SIM卡
在Surface Go(Surface Go)设备中安装SIM卡的过程与上述基本相同。就是这样:
- 将配备LTE Advanced的(LTE Advanced)Surface Go屏幕朝向您,将左边缘转向您,直到看到SIM卡托盘。
- 从Surface Go(Surface Go)包装盒中的说明卡中取出SIM弹出工具。
- 将(Insert)SIM 卡(SIM)弹出工具插入小孔并轻轻按入,直至SIM卡托弹出。完成后,请将SIM 卡(SIM)弹出工具放在安全的地方,以便日后再次找到它。
- 从插槽中取出SIM卡托盘。取下时,请保持正面朝上。
- 将SIM卡放入SIM卡托盘。确保(Make)SIM卡上的槽口和托盘对齐。SIM卡上的文字或标志应朝上。
- 将SIM(SIM)卡托盘滑回SIM卡插槽,直至听到咔嗒声。请勿强行插入 - SIM卡托盘应顺利滑入。
如何在Surface Pro X设备中安装SIM卡:
- 将Surface Pro X屏幕放在桌子上,抬起支架以露出SIM卡门。
- 将(Insert)随附的SIM 卡弹出工具插入(SIM)SIM卡门上的小孔以将其卸下。
- 将您的SIM卡推入SIM卡插槽,直至听到咔嗒声。
- 将SIM卡门滑入到位,然后向下按直到发出咔嗒声。
- 要使用您的 SIM 卡,请选择开始 (Start ) > 设置 (Settings ) > 网络和 Internet(Network & Internet) > 蜂窝 (Cellular )网络,然后在 使用此 SIM 卡获取蜂窝数据(Use this SIM for cellular data)下,选择 SIM1。
- 在任务栏上,选择网络 (Network )图标(icon) 并确保您的SIM卡移动运营商已列出。
如何在Surface(Surface)设备上设置数据连接
您可以在Surface Pro X、配备 LTE Advanced 的Surface Pro(第 5代(Gen))或配备LTE (LTE Advanced)Advanced的(LTE Advanced)Surface Go上设置(Surface Go)LTE连接,以便随时随地保持连接。
Surface Pro X和配备LTE Advanced的(LTE Advanced)Surface Pro
有两种方法可以在Surface Pro X 上获取蜂窝数据:
1. 您可以使用移动运营商提供的 nano SIM 卡(SIM)和数据套餐。
或者
2. 您可以使用Surface Pro X内置的嵌入式SIM (e SIM )以及Windows 10中的(Windows 10)移动(Mobile)计划(Plans)应用程序。在Mobile Plans应用程序中,您可以将您的设备添加到您当前的移动运营商帐户或注册一个新的。
1]使用(Using SIM)移动运营商提供的 SIM 卡和数据套餐
- 请联系您的移动运营商以注册数据计划或添加到您当前的计划中。
- 将(Insert)SIM卡插入Surface Pro(Surface Pro X) X。
- 插入SIM卡后,选择开始(Start) > 设置 (Settings ) > 网络和 Internet(Network & Internet) > 蜂窝(Cellular)网络,然后 从 使用此 SIM 卡获取蜂窝数据中选择(Use this SIM for cellular data)SIM1。
2] 使用您的 eSIM 和Mobile Plans应用程序
如果这是您第一次使用eSIM(Plans),您需要连接到Wi-Fi并打开移动(Mobile) 套餐应用程序。有关详细信息,请参阅此Microsoft 指南(Microsoft guide)。
如果您同时拥有两种类型的数据计划(一种来自您的移动运营商,另一种通过移动(Mobile) 计划(Plans)应用程序来自另一家移动运营商),您可以随时在它们之间切换。就是这样:
- 选择开始(Start) > 设置(Settings) > 网络和 Internet(Network & Internet) > 蜂窝(Cellular)网络 以选择数据计划。
- 要使用您的移动运营商SIM卡,请 为 使用此 SIM 卡获取蜂窝数据(Use this SIM for cellular data)选择SIM1。
- 要在您的 eSIM 上使用数据计划,请 为 使用此 SIM 卡获取蜂窝数据选择(Use this SIM for cellular data)eSIM。
配备 LTE Advanced 的 Surface Go
配备LTE Advanced的 Surface Go 有一个SIM托盘,可让您插入 nano SIM卡。在设置LTE连接之前,您需要从移动运营商处获得激活的 nano SIM卡。(SIM)
以下是在Surface Go上开始使用LTE的方法:
- 请联系您的移动运营商以注册数据计划或添加到您当前的计划中。
- 将(Insert)SIM卡插入配备LTE Advanced的Surface Go。
- 要检查您是否已连接到蜂窝网络,请选择 开始(Start) > 设置(Settings) > 网络和 Internet(Network & Internet) > 蜂窝(Cellular)网络。
And that’s it! Hope you find this guide useful.
How to insert a SIM card & set up data connection on Surface device
To get a cellular data connection on your Surface Pro (5th Gen) with LTE Advanced, Surface Go with LTE Advanced, or Surface Pro X, you’ll need a nano SIM from your mobile carrier before you get started. In today’s post, we will illustrate how to insert a SIM card & set up a data connection on your Surface device. The instructions apply to Windows 10 devices and Surface.
How to insert a SIM card into your Surface
Surface Pro (5th Gen) with LTE Advanced
1. With your Surface Pro (5th Gen) with LTE Advanced facing down, gently pull out the kickstand. The kickstand has the Microsoft logo on the back.
2. Remove the SIM ejector tool from the instruction card that’s on top of the envelope in the box your Surface Pro came in.
3. Locate your SIM card tray near the bottom-right corner and under the kickstand of your Surface Pro (5th Gen) with LTE Advanced.
4. Insert the SIM ejector tool into the small hole and gently press in to eject the SIM card tray. When you’re done, slide the SIM ejector tool back into the instruction card so you can find it again later.
[Image source – Microsoft]
5. Remove the SIM card tray from the slot. When you remove it, keep it face-up.
6. Place the SIM card face up in the SIM card tray. Make sure the small notch in the corner of the SIM card matches the one in the SIM card tray so that it fits properly. The words or logo on the SIM card should be facing up.
7. Slide the SIM card tray back into the SIM card slot until it clicks. The small hole in the SIM card tray should be closest to the bottom-right corner. Make sure the SIM card tray slides in smoothly—don’t force it.
Microsoft has also provided a short video on how to install a SIM card in your Surface Pro device.
How to install a SIM card in Surface Go with LTE Advanced
The procedure to install a SIM card in your Surface Go device is fairly the same as above. Here’s how:
- With your Surface Go with LTE Advanced screen facing you, turn the left edge towards you until you see the SIM card tray.
- Remove the SIM ejector tool from the instruction card that’s in the box your Surface Go came in.
- Insert the SIM ejector tool into the small hole and gently press in until the SIM card tray is ejected. When you’re done, keep your SIM ejector tool somewhere safe so you can find it again later.
- Remove the SIM card tray from the slot. When you remove it, keep it face up.
- Place the SIM card in the SIM card tray. Make sure that the notches on the SIM card and the tray line up. The words or logo on the SIM card should be facing up.
- Slide the SIM card tray back into the SIM card slot until it clicks. Don’t force it in – the SIM card tray should slide in smoothly.
How to install a SIM card in your Surface Pro X device:
- Place your Surface Pro X screen on a table and lift the kickstand to reveal the SIM door.
- Insert the included SIM ejector tool into the small hole on the SIM door to detach it.
- Push your SIM card into the SIM card slot until it clicks.
- Slide the SIM door into place, then press down until it clicks.
- To use your SIM, select Start > Settings > Network & Internet > Cellular , then under Use this SIM for cellular data, select SIM1.
- On the taskbar, select the Network icon and make sure your SIM card mobile operator is listed.
How to set up a data connection on a Surface device
You can set up the LTE connection on your Surface Pro X, Surface Pro (5th Gen) with LTE Advanced, or Surface Go with LTE Advanced to stay connected anywhere you go.
Surface Pro X and Surface Pro with LTE Advanced
There are two ways to get cellular data on your Surface Pro X:
1. You can use a nano SIM and data plan from your mobile operator.
OR
2. You can use the embedded SIM (eSIM) that comes built into your Surface Pro X, along with the Mobile Plans app in Windows 10. In the Mobile Plans app, you may be able to add your device to your current mobile operator account or sign up with a new one.
1] Using SIM and data plan from your mobile operator
- Contact your mobile operator to sign up for a data plan or add to your current plan.
- Insert the SIM card into your Surface Pro X.
- Once the SIM card is inserted, select Start > Settings > Network & Internet > Cellular and then select SIM1 from Use this SIM for cellular data.
2] Using your eSIM and the Mobile Plans app
If this is your first time using an eSIM, you need to connect to Wi-Fi and open the Mobile Plans app. Refer to this Microsoft guide for more info.
If you have both types of data plans (one from your mobile operator and one from another mobile operator through the Mobile Plans app), you can switch between them at any time. Here’s how:
- Select Start > Settings > Network & Internet > Cellular to choose a data plan.
- To use your mobile operator SIM card, select SIM1 for Use this SIM for cellular data.
- To use the data plan on your eSIM, select eSIM for Use this SIM for cellular data.
Surface Go with LTE Advanced
Your Surface Go with LTE Advanced has a single SIM tray that will allow you to insert a nano SIM card. Before you set up your LTE connection, you’ll need an activated nano SIM card from your mobile operator.
Here’s how to get started with LTE on Surface Go:
- Contact your mobile operator to sign up for a data plan or add to your current plan.
- Insert the SIM card into your Surface Go with LTE Advanced.
- To check that you’re connected to a cellular network, select Start > Settings > Network & Internet > Cellular.
And that’s it! Hope you find this guide useful.