作为易于访问系统的一部分，在Windows 10^{(Windows 10)} build 16215中引入了滤色器。这些滤色器在系统级别工作，包括各种滤色器，可以将屏幕变为黑白、反转颜色等。这些滤色器旨在让色盲的人更容易区分屏幕上的颜色。此外，对光或颜色敏感的人可以轻松使用这些过滤器使内容更易于阅读，从而将Windows的覆盖范围扩大到更多用户。

Windows 10中提供了不同类型的滤色器，例如灰度^(Greyscale)、反转^(Invert)、灰度反转^{(Greyscale Inverted)}、Deuteranopia、Protanopia和Tritanopia。因此，不要浪费任何时间，让我们看看如何使用下面列出的教程的 helo在Windows 10中启用或^{(Windows 10)}禁用颜色过滤器。^{(Disable Color Filters)}

在Windows 10^{(Windows 10)}中启用或禁用颜色过滤器

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：使用键盘快捷键启用或禁用颜色过滤器^{(Method 1: Enable or Disable Color Filters Using Keyboard Shortcut)}

Press Windows Key + Ctrl + C keys on the keyboard together to enable the default greyscale filter。如果您需要禁用灰度过滤器，请再次使用快捷键。^(Again)如果快捷方式未启用，则您需要使用以下指南启用它。

要更改Windows Key + Ctrl + C快捷键组合的默认过滤器，请按照以下步骤操作：

1. 按 Windows 键 + I 打开设置^(Settings)，然后单击轻松访问。^{( Ease of Access.)}

2. 从左侧菜单中，单击滤色器。^{(Color filter.)}

3. 现在在右侧窗口中的“使用^(Use)颜色过滤器”复选标记^(checkmark)“允许快捷键打开或关闭过滤器^{(Allow the shortcut key to toggle the filter on or off)}”。现在，您可以随时使用快捷键 Windows Key + Ctrl + C keys启用颜色过滤器。^{( to enable Color filter any time you want.)}

4. 在滤色^(Color)器下，从列表中选择您想要的任何滤色器，然后使用快捷键组合启用滤色器。

Windows Key + Ctrl + C Shortcut key启用或禁用颜色过滤^{(Enable or Disable Color Filters in Windows 10.)}器时，这将更改默认过滤器。

方法 2：在 Windows 10 设置中启用或禁用颜色过滤器^{(Method 2: Enable or Disable Color Filter in Windows 10 Settings)}

1. 按Windows Key + I 打开设置^(Settings)，然后单击轻松访问。^{(Ease of Access.)}

2. 从左侧菜单中，单击颜色过滤器。^{(Color filters.)}

3. 要启用滤色器，请将“使用滤色器^{(Use colour filters)}”下方的按钮切换为“开^{( ON)}” ，然后在其下方选择 您要使用的所需滤色器。^{( desired filter you want to use.)}

4. 如果您想禁用颜色过滤器，请关闭“使用颜色过滤器”下的切换。^{(turn off the toggle under “Use colour filter”.)}

5. 重新启动您的 PC 以保存更改。

方法 3：使用注册表编辑器启用或禁用颜色过滤器^{(Method 3: Enable or Disable Color Filter Using Registry Editor)}

1. 按 Windows 键 + R，然后键入regedit并按 Enter。

2. 导航到以下注册表项：

HKEY_CURRENT_USER\Software\Microsoft\ColorFiltering

3. 右键单击​​ ColorFiltering键，然后选择New > DWORD (32-bit) Value.

注意：^(Note:)如果Active DWORD已经存在，请跳到下一步。

4. 将此新创建的DWORD命名为Active，然后双击它以根据以下方式更改其值：

在 Windows 10 中启用颜色过滤器：1 在 Windows 10^{(Enable Color Filters in Windows 10: 1)}
中禁用颜色过滤器：0^{(Disable Color Filters in Windows 10: 0)}

5. 再次右键单击ColorFiltering键，然后选择New > DWORD (32-bit) Value.

注意：^(Note:)如果FilterType DWORD已经存在，请跳到下一步。

6. 将此 DWORD 命名为FilterType然后双击它以根据以下方式更改其值：

0 = Greyscale
1 = Invert
2 = Greyscale Inverted
3 = Deuteranopia
4 = Protanopia
5 = Tritanopia

7.单击确定^{(Click OK)}，然后关闭所有内容并重新启动 PC 以保存更改。

受到推崇的：^{(Recommended:)}

• 在 Windows 10 中启用或禁用 ClearType^{(Enable or Disable ClearType in Windows 10)}
• 在 Windows 10 中启用或禁用鼠标 ClickLock^{(Enable or Disable Mouse ClickLock in Windows 10)}
• 如何在 Windows 10 中创建清除剪贴板的快捷方式^{(How to Create a Shortcut to Clear the Clipboard in Windows 10)}
• 在 Windows 10 中轻松访问颜色和外观^{(Easily Access Color And Appearance In Windows 10)}

就是这样，您已经成功学习了如何在 Windows 10 中启用或禁用颜色过滤器，^{(How to Enable or Disable Color Filters in Windows 10)}但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

Enable or Disable Color Filters in Windows 10

Сolour Filters were introduced in Windows 10 build 16215 as a part of ease of access system. These colour filters work at the system level and include various colour filters whiсh can turn your screen black and white, invert colours etc. These filters are designed to mаke it eaѕier for pеople with colоur blindness to distinguish colours on their screen. Also, people with light or colour sеnsitivity can easily use theѕe filters to make the content easier to read, thus incrеasing thе reach of Windоws to far more υѕers.

There are different types of colour filters available in Windows 10 such as Greyscale, Invert, Greyscale Inverted, Deuteranopia, Protanopia, and Tritanopia. So without wasting any time, let’s see How to Enable or Disable Color Filters in Windows 10 with the helo of the below-listed tutorial.

Enable or Disable Color Filters in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Enable or Disable Color Filters Using Keyboard Shortcut

Press Windows Key + Ctrl + C keys on the keyboard together to enable the default greyscale filter. Again use the shortcut keys if you need to disable the greyscale filter. If the shortcut isn’t enabled, then you need to enable it using the below guide.

To change the default filter for Windows Key + Ctrl + C shortcut key combination, follow the below-listed steps:

1. Press Windows Key + I to open Settings then click on Ease of Access.

2. From the left-hand menu, click on Color filter.

3. Now in the right-hand window under “Use colour filter” checkmark “Allow the shortcut key to toggle the filter on or off“. Now you can use the shortcut Windows Key + Ctrl + C keys to enable Color filter any time you want.

4. Under the Color filters, select any colour filter from the list you want and then use the shortcut key combination to enable the colour filters.

5. This will change the default filter when you use the Windows Key + Ctrl + C Shortcut key to Enable or Disable Color Filters in Windows 10.

Method 2: Enable or Disable Color Filter in Windows 10 Settings

1. Press Windows Key + I to open Settings then click on Ease of Access.

2. From the left-hand menu, click on Color filters.

3. To enable the colour filters, toggle the button under “Use colour filters” to ON and then under it, select the desired filter you want to use.

4. If you wish to disable the colour filters, turn off the toggle under “Use colour filter”.

5. Reboot your PC to save changes.

Method 3: Enable or Disable Color Filter Using Registry Editor

1. Press Windows Key + R then type regedit and hit Enter.

2. Navigate to the following registry key:

HKEY_CURRENT_USER\Software\Microsoft\ColorFiltering

3. Right-click on the ColorFiltering key then selects New > DWORD (32-bit) Value.

Note: If the Active DWORD is already there, skip to the next step.

4. Name this newly created DWORD as Active then double-click on it to change its value according to:

Enable Color Filters in Windows 10: 1
Disable Color Filters in Windows 10: 0

5. Again right-click on the ColorFiltering key then select New > DWORD (32-bit) Value.

Note: If the FilterType DWORD is already there, skip to the next step.

6. Name this DWORD as FilterType then double-click on it to change its value according to:

0 = Greyscale
1 = Invert
2 = Greyscale Inverted
3 = Deuteranopia
4 = Protanopia
5 = Tritanopia

7. Click OK then close everything and reboot your PC to save changes.

Recommended:

• Enable or Disable ClearType in Windows 10
• Enable or Disable Mouse ClickLock in Windows 10
• How to Create a Shortcut to Clear the Clipboard in Windows 10
• Easily Access Color And Appearance In Windows 10

That’s it you have successfully learned How to Enable or Disable Color Filters in Windows 10 but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• 禁用Windows 10中的夹夹Zoom Feature

• 在Windows 10中创建Full System Image Backup [终极指南]

• 如何在Windows 10中创建System Image Backup

• 如何在Windows 10中删除Volume or Drive Partition

• 如何在Windows 10中禁用粘滞Corners

• 在Windows 10中使用Diskpart Clean Command清洁Disk

• 在Windows 10中更改Operating Systems的Time至Display List Startup

• Windows 10中Fix Unable至Delete Temporary Files

• 3 Ways至Add Album Art至Z86152至Windows 10中的MP3

• Fix Computer Wo在Windows 10中没有转到Sleep Mode

• 如何在Windows 10上运行JAR Files

• 如何在PC上更改NAT Type（Windows 10）

• 如何在Windows 10中Fix Corrupted Registry

• 在Windows 10 Lock Screen上启用或禁用Cortana

• 如何在Windows 10中更改Screen Brightness

• 强制清除Windows 10中的Print Queue

• Fix Calculator不在Windows 10工作

• 如何禁用Windows 10 Firewall

• Windows 10中的Defer Feature and Quality Updates

• 如何在Windows 10中启用或Disable Emoji Panel