几乎所有现代Wi-Fi路由器都配备了一个配置界面，您可以通过 Web 浏览器访问并使用它来设置您的偏好。因此，如果您从来没有过多关注您的路由器，那么是时候学习如何访问和更改 WiFi 路由器设置(change WiFi Router Settings)了。我们使用了JIO的屏幕截图——因此实际设置可能会因您的情况而异——但过程或多或少保持相同。
您如何访问路由器设置？
启动(Fire)浏览器并输入路由器的 IP 地址。您将通过Network Settings > View hardware and connection properties in Windows获得默认网关 IP 。接下来(Next)，输入用户名（一般默认为admin）和密码（一般默认为空），然后点击OK或Log In。进入后，您将看到您的仪表板(Dashboard)。
如何改进我的无线路由器设置？
通过访问您的WiFi路由器设置，您可以利用路由器的一些更高级的功能，其中许多功能您可能是第一次发现。例如，您可以更改以下内容 -
- 更改路由器的IP地址
- 更改路由模式
- 更改默认防火墙策略
- 允许或禁止内容过滤
- 启用或禁用 VPN 直通
- 配置 DoS/DDoS 防护
在开始之前，请确保路由器已开机且计算机已连接到网络。
如何修改或更改您的WiFi 路由器(WiFi Router)设置？
1]更改路由器的IP地址
要找到您的默认网关，首先，单击Windows按钮并选择Settings。
接下来，选择Network and Internet Settings磁贴，然后单击View hardware and connection properties。
向下滚动到默认网关(Default gateway)条目，然后将地址 (192.16X.XX.X) 复制粘贴到新选项卡地址栏中。
输入用户名(Username)和密码(Password)以访问路由器(Router)设置。
切换到网络(Network )选项卡。
在LAN 配置(LAN configuration)下，更改 IP 地址。然后，输入一个有效的域名(Domain name)并点击保存(Save)按钮以保存更改。
2]更改路由模式
路由模式允许使用未注册 IP 地址的专用 IP 网络连接到Internet。此外，由于它执行安全和地址保存的双重功能，它通常在远程访问环境中实现。您可以将其更改为经典路由(Classic Routing)，但这样做会将所有端口防火墙设置恢复为默认值。
转到网络(Network )选项卡并选择路由(Routing)菜单。
在右侧选择所需的路由模式。默认情况下，它设置为NAT。此模式专为 IP 地址保护而设计。
3]更改默认防火墙策略
防火墙(Firewall)是一种机制，用于管理采用不同安全状态的网络或主机之间的网络流量。为了提供额外的安全层，网络(Network)设计人员通常在网络外围以外的地方包括防火墙功能。您可以在Allow Always(Allow Always)和Block Always之间切换。启用防火墙始终(Firewall Always)确保保护免受不必要的威胁。
4]内容过滤
大多数路由器都支持内置的网站过滤功能，以阻止或允许一些特定网站。这有助于通过阻止访问不适当的内容来为客人创建更安全的浏览环境。因此，您可以启用内容过滤(Content Filtering)来阻止某些关键字出现在您的结果中。
只需点击选择文件(Choose File)以浏览到您添加了要阻止的关键字列表的文件的位置，然后点击导入(Import )按钮。
同样，您只能批准某些您认为可以安全浏览的URL(URLs)
5]启用(Enable)或禁用VPN直通
VPN Passthrough是一种使连接到路由器的任何设备能够建立出站VPN连接的功能。例如，如果您想从 PC 或台式机连接到(Desktop)VPN服务器，您可以打开路由器上的VPN Passthrough功能，将来自VPN客户端的数据包通过路由器传递到VPN 服务器(VPN server)。
6]配置DoS / DDoS预防
客户需要针对其网络资产的DDoS 攻击(DDoS attacks)和其他安全威胁提供强大的保护。DDoS的性质千差万别，可以从小型复杂到大型和带宽破坏。正是由于这个原因，许多互联网服务提供商(Internet Service Providers)通过其路由器的设置提供完全托管的DDoS保护。(DDoS)
我们希望你觉得这篇文章有用。
如果您无法使用登录 URL 或 IP 地址访问路由器配置页面，请参阅此帖子。
How to modify or change your WiFi Router settings?
Almost all modern Wi-Fi routers are equipped with a confіgυration interface that you can access through a wеb browser and uѕе it to set your preferences. So, if уou’ve never paid much attention to your router, it’s timе you learn how to aсcess and change WiFi Router Settings. We have used screenshots for JIO – and so the actual settings may vary in your case – but the procedure remains more or less the same.
How do you access your router settings?
Fire up your browser and type in the IP address of the router. You will get the default gateway IP via Network Settings > View hardware and connection properties in Windows. Next, enter the username (normally it is admin by default) and password (normally it is blank by default), and then click OK or Log In. Once in you will see your Dashboard.
How do I improve my wireless router settings?
By getting access to your WiFi router settings, you can take advantage of some of the more advanced features of your router, many of which you might discover for the first time. For example, you can change the following-
- Change Router’s IP address
- Change Routing mode
- Change Default Firewall Policy
- Allow or Disallow Content Filtering
- Enable or disable VPN passthrough
- Configure DoS/DDoS Preventions
Before you start, make sure the router is powered on and the computer is connected to the network.
How to modify or change your WiFi Router settings?
1] Change Router’s IP address
To find your default gateway, first, click the Windows button and choose Settings.
Next, select the Network and Internet Settings tile and click View hardware and connection properties.
Scroll down to Default gateway entry and copy-paste the address (192.16X.XX.X) in a new tab address bar.
Enter the Username and Password to get access to the Router settings.
Switch to the Network tab.
Under LAN configuration, change the IP address. Then, enter a valid Domain name and hit the Save button to save the changes.
2] Change Routing mode
Routing mode enables private IP networks that use unregistered IP addresses to connect to the Internet. Also, as it performs dual functions of security and address conservation, it is typically implemented in remote-access environments. You can change it to Classic Routing but doing so will revert all port firewall settings to defaults.
Go to Network tab and choose the Routing menu.
On the right choose the desired routing mode. By default, it’s set to NAT. This mode is designed for IP address conservation.
3] Change Default Firewall Policy
Firewall is a mechanism that manage the flow of network traffic between networks or hosts that employ differing security postures. To provide an additional layer of security Network designers often include firewall functionality at places other than the network perimeter. You can switch between Allow Always and Block Always. Enabling Firewall Always ensures protection from unwanted threats.
4] Content Filtering
Most routers support a built-in website filtering to block or allow a few specific sites. This helps in creating a safer browsing environment for guests by blocking access to inappropriate content. As such, you can enable Content Filtering to block certain keywords from appearing in your results.
Simply hit the Choose File to browse to the location of the file to which you have added the list of keywords you would like to block and hit the Import button.
Similarly, you can only approve certain URLs, you consider as safe for browsing
5] Enable or disable VPN passthrough
VPN Passthrough is a capability that enables any device connected to a router to establish outbound VPN connections. For example, if you would like to connect to your VPN server from your PC or Desktop, you can turn on the VPN Passthrough feature on your router to pass data packets that come from a VPN client to reach the VPN server through the router.
6] Configure DoS/DDoS Preventions
Customers demand robust protection against DDoS attacks and other security threats for their network assets. The nature of DDoS varies widely and can range from small and sophisticated to large and bandwidth-busting. It is for this reason, many Internet Service Providers offer fully managed DDoS protection through their router’s settings.
We hope you find the post useful.
See this post if you are unable to access the Router configuration page using login URL or IP address.
