修复电脑在多次重启后才启动： (Fix Computer does not start until restarted multiple times: ) PC用户似乎出现了一个新问题，即当他们第一次打开PC时电源打开，风扇开始旋转但一切突然停止，PC永远无法显示，简而言之，PC 在没有任何警告的情况下自动关闭。(OFF)现在，如果用户关闭 PC 电源然后重新打开，计算机将正常启动，不会出现任何其他问题。基本上(Basically)，计算机(Computer)直到多次重新启动后才会启动，这对于基本的Windows用户来说非常烦人。
有时您需要最多启动 4-5 次才能看到显示甚至启动您的 PC，但不能保证它会启动。现在生活在这种不确定性中，您第二天可能会或可能无法使用您的 PC 并不是一件好事，因此您需要立即解决这个问题。
现在只有少数问题会导致此问题，因此您绝对可以轻松解决此问题。问题有时可能与软件有关，例如在许多情况下，罪魁祸首似乎是快速启动(Fast Startup)，禁用它似乎可以解决问题。但是，如果这不能解决问题，那么您可以确定问题与硬件有关。在硬件方面，这可能是内存问题、电源故障、BIOS 设置(BIOS Settings)或CMOS电池干涸等。所以不要浪费任何时间，让我们看看如何在下面列出的帮助下修复计算机(Fix Computer)在多次重启之前无法启动指导。
修复计算机(Fix Computer)在多次重新启动之前无法启动
确保 创建一个还原点(create a restore point)，以防万一出现问题。
注意：(Note:)某些方法需要专家监督，因为您在执行这些步骤时可能会严重损坏您的 PC，因此如果您不知道自己在做什么，请将您的笔记本电脑/PC 带到服务维修中心。如果您的 PC 在保修期内，则打开机箱可能会使保修失效/失效。
方法一：关闭快速启动(Method 1: Turn Off Fast Startup)
1.按Windows Key + R然后键入 control 并按Enter打开控制面板。(Control Panel.)
2.点击硬件和声音，(Hardware and Sound)然后点击电源选项(Power Options)。
3.然后从左侧窗格中选择“选择电源按钮的功能。(Choose what the power buttons do.)“
4.现在点击“更改当前不可用的设置。(Change settings that are currently unavailable.)“
5.取消选中“开启快速启动(Turn on fast startup)”并点击保存更改。
方法2：运行自动修复(Method 2: Run Automatic Repair)
1.插入 Windows 10 可启动安装 DVD(Insert the Windows 10 bootable installation DVD)并重新启动您的 PC。
2.当提示Press any key to boot from CD or DVD时，按任意键继续。
3.选择您的语言首选项，然后单击下一步(Next)。单击左下角的修复计算机。(Click Repair)
4.在选择选项屏幕上，单击疑难解答(Troubleshoot)。
5.在疑难解答屏幕上，单击高级选项(Advanced option)。
6.在高级(Advanced)选项屏幕上，单击自动修复或启动修复(Automatic Repair or Startup Repair)。
7. 等待Windows Automatic/Startup Repairs完成。
8.重启成功修复电脑多次重启后无法启动的问题，( Fix Computer does not start until restarted multiple times issue,) 如果没有，继续。
另外，请阅读 如何修复自动修复无法修复您的 PC。(How to fix Automatic Repair couldn’t repair your PC.)
方法 3：将 BIOS 重置为默认设置(Method 3: Reset BIOS to default settings)
1.关闭您的笔记本电脑，然后打开它，同时按 F2、DEL 或 F12( press F2, DEL or F12)（取决于您的制造商）进入BIOS 设置。( BIOS setup.)
2.现在你需要找到reset选项来加载默认配置(load the default configuration)，它可能被命名为Reset to default、Load factory defaults、Clear BIOS settings、Load setup defaults或类似的东西。
3.用箭头键选择它，按Enter，然后确认操作。您的BIOS现在将使用其默认设置。(default settings.)
4.一旦你登录到Windows看看你是否能够 修复计算机在多次重新启动之前无法启动的问题。(Fix Computer does not start until restarted multiple times issue.)
方法四：检查硬盘是否有故障(Method 4: Check if hard disk is failing)
在许多情况下，问题是由于硬盘故障而发生的，要检查这是否是问题所在，您需要断开硬盘与 PC 的连接并将其连接到另一台 PC 并尝试从它启动。如果您可以从硬盘启动而在另一台 PC 上没有任何问题，那么您可以确定该问题与它无关。
另一种测试硬盘的方法是下载并在 CD 上刻录 SeaTools(download and burn the SeaTools) for DOS，然后运行测试以检查硬盘是否出现故障。您需要从BIOS将首次引导设置为(BIOS)CD/DVD才能使其正常工作。
方法五：检查电源(Method 5: Check Power Supply)
电源(Power Supply)故障或故障通常是导致 PC 在第一次启动时无法启动的原因。因为如果不满足硬盘的功耗，它将无法获得足够的电力运行，随后您可能需要重新启动PC几次才能从PSU获得足够的电力。在这种情况下，您可能需要用新电源更换电源，或者您可以借用备用电源来测试是否是这种情况。
如果您最近安装了新硬件，例如显卡，那么PSU可能无法提供显卡所需的必要电源。只是(Just)暂时删除硬件，看看这是否能解决问题。如果问题得到解决，那么为了使用显卡，您可能需要购买更高电压的电源装置(Power Supply Unit)。
方法六：更换CMOS电池(Method 6: Replace CMOS battery)
如果CMOS电池已干涸或不再供电，那么您的 PC 将无法启动，几天后它最终将开始挂起。为了解决此问题，建议更换CMOS电池。
方法 7：ATX 重置(Method 7: ATX Resetting)
注意：(Note:)此过程通常适用于笔记本电脑，因此如果您有计算机，请离开此方法。
1 .关闭您的笔记本电脑(.Power off your laptop)，然后拔下电源线，放置几分钟。
2.现在从后面取出电池( remove the battery)并按住电源按钮 15-20 秒。
注意：(Note:)暂时不要连接电源线，我们会告诉您何时连接。
3.现在插入电源线(your power cord)（不应插入电池）并尝试启动笔记本电脑。
4.如果它正常启动然后再次关闭你的笔记本电脑。放入电池并再次启动您的笔记本电脑。
如果问题仍然存在，请再次关闭您的笔记本电脑，移除电源线和电池。按住(Press)电源按钮 15-20 秒，然后插入电池。打开笔记本电脑的电源，这应该可以解决问题。
现在，如果上述任何一种方法都没有帮助，那么这意味着问题出在您的主板上，不幸的是，您需要更换它才能解决问题。
受到推崇的：(Recommended:)
就是这样，您已成功修复计算机在多次重新启动之前无法启动的问题(Fix Computer does not start until restarted multiple times issue)，但如果您对本指南仍有任何疑问，请随时在评论部分询问他们。
Fix Computer does not start until restarted multiple times
Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.
Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.
Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.
Fix Computer does not start until restarted multiple times
Make sure to create a restore point, just in case something goes wrong.
Note: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.
Method 1: Turn Off Fast Startup
1.Press Windows Key + R then type control and hit Enter to open Control Panel.
2.Click on Hardware and Sound then click on Power Options.
3.Then from the left window pane select “Choose what the power buttons do.“
4.Now click on “Change settings that are currently unavailable.“
5.Uncheck “Turn on fast startup” and click on Save changes.
Method 2: Run Automatic Repair
1.Insert the Windows 10 bootable installation DVD and restart your PC.
2.When prompted to Press any key to boot from CD or DVD, press any key to continue.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Restart and you have successfully Fix Computer does not start until restarted multiple times issue, if not, continue.
Also, read How to fix Automatic Repair couldn’t repair your PC.
Method 3: Reset BIOS to default settings
1.Turn off your laptop, then turn it on and simultaneously press F2, DEL or F12 (depending on your manufacturer) to enter into BIOS setup.
2.Now you’ll need to find the reset option to load the default configuration and it may be named as Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, or something similar.
3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS will now use its default settings.
4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.
Method 4: Check if hard disk is failing
In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.
Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.
Method 5: Check Power Supply
A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.
If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.
Method 6: Replace CMOS battery
If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.
Method 7: ATX Resetting
Note: This process generally applies to laptops, so if you have a computer then leave this method.
1.Power off your laptop then remove the power cord, leave it for few minutes.
2.Now remove the battery from behind and press & hold the power button for 15-20 seconds.
Note: Do not connect the power cord just yet, we will tell you when to do that.
3.Now plug in your power cord (battery should not be inserted) and trying booting up your laptop.
4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.
If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.
Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.
Recommended:
That’s it you have successfully Fix Computer does not start until restarted multiple times issue but if you still have any queries regarding this guide then feel free to ask them in the comment’s section.
