如果您最近升级到Windows 10,那么您可能会遇到鼠标突然滞后或冻结的问题。(mouse will lag or freeze suddenly.)如果您遇到这种情况,请不要担心,因为还有许多其他用户面临同样的问题。虽然这可能看起来像是Windows 操作系统(Windows Operating)问题,但实际上,问题是由于鼠标驱动程序损坏、过时或不兼容而发生的。
当您遇到此问题时,您将无法移动鼠标太多,因为鼠标光标滞后或向前跳跃,有时它也会在实际移动之前冻结几毫秒。无论如何(Anyway),不要浪费任何时间,让我们在下面列出的教程的帮助下看看如何在 Windows 10 中修复鼠标滞后。(How to Fix Mouse Lags in Windows 10)

在继续之前,请确保:
- 尝试暂时断开任何其他USB外围设备,例如笔式驱动器、打印机等。然后重新启动您的 PC 并再次尝试使用鼠标(Mouse),看看这是否能解决问题。
- 不要使用USB集线器连接鼠标(Mouse),而是直接将鼠标连接到USB端口。
- (Make)使用触摸板时,(Touchpad)请务必断开USB鼠标。
- 尝试暂时禁用您的防病毒(Antivirus)软件,看看是否能解决问题。
- 更换 USB(Change USB)端口并检查鼠标(Mouse)是否工作,如果仍然存在问题,那么我建议您尝试在另一台 PC 上使用USB 鼠标(USB Mouse),看看它是否工作。
在Windows 10上(Windows 10)修复鼠标延迟(Fix Mouse Lags)的10 种有效方法
确保 创建一个还原点(create a restore point) 以防万一出现问题。
方法一:重装鼠标驱动(Method 1: Reinstall Mouse Driver)
1.按 Windows 键 + R 然后键入control并按 Enter。

2.在设备管理器窗口中,展开鼠标和其他指针设备。(Mice and other pointing devices.)
3.右键单击 鼠标设备(your mouse device) ,然后选择卸载。(Uninstall.)

4.如果要求确认,请选择是。(Yes.)
5.重新启动您的 PC 以保存更改。
6.Windows 将自动为您的鼠标(Mouse)安装默认驱动程序。
方法二:更新显卡驱动(Method 2: Update Graphics Card Driver)
如果您在Windows 10中遇到鼠标滞后或突然死机的问题,则此错误的最可能原因是显卡(Graphics)驱动程序损坏或过时。当您更新 Windows 或安装第三方应用程序时,它可能会损坏您系统的视频驱动程序。如果您遇到任何此类问题,那么您可以在本指南的帮助下轻松更新显卡驱动程序(update graphics card drivers with the help of this guide)。

方法 3:启用或禁用滚动非活动窗口(Method 3: Enable or Disable Scroll Inactive Windows)
1.按Windows Key + I 打开设置(Settings),然后单击设备。(Devices.)

2.从左侧菜单中单击鼠标。(Mouse.)
3.找到“当我将鼠标悬停在它们上时滚动非活动窗口(Scroll inactive windows when I hover over them)”,然后禁用或启用(disable or enable)它几次,看看这是否解决了问题。

4.重新启动您的 PC 以保存更改并查看您是否能够 修复 Windows 10 问题上的鼠标滞后问题。(Fix Mouse Lags on Windows 10 Issue.)
方法四:Realtek Audio 的结束任务(Method 4: End Task for Realtek Audio)
1.按 Ctrl + Shift + Esc 打开任务管理器。(Task Manager.)

2.右键单击Realtekaudio.exe并选择结束任务。(End Task.)
3.查看您是否能够解决问题,如果不能,请禁用 Realtek HD Manager。( disable Realtek HD Manager.)
4.切换到启动选项卡(Switch to Startup tab)并禁用 Realtek HD 音频管理器。(disable Realtek HD audio manager.)

5.重新启动您的 PC 以保存更改并查看您是否能够 修复 Windows 10 问题上的鼠标滞后问题。(Fix Mouse Lags on Windows 10 Issue.)
Method 5: Update Mouse Drivers to Generic PS/2 mouse
1.按Windows Key + X然后选择设备管理器。(Device Manager.)
2.扩展鼠标和其他指针设备。(Mice and other pointing devices.)
3.在我的情况下选择您的鼠标设备,它是( Mouse device)戴尔触摸板(Dell Touchpad),然后按Enter打开其属性窗口。(Properties window.)

4.切换到驱动程序选项卡(Driver tab),然后单击更新驱动程序。(Update Driver.)

5.现在选择浏览我的电脑以获取驱动程序软件。(Browse my computer for driver software.)

6.下一步,选择让我从计算机上的设备驱动程序列表中选择。(Let me pick from a list of device drivers on my computer.)

7.从列表中选择PS/2 Compatible Mouse,然后单击下一步。

8.安装驱动程序后,重新启动PC以保存更改。
方法 6:禁用 Cortana(Method 6: Disable Cortana)
Cortana是微软为Windows 10创建的虚拟助手。Cortana旨在使用Bing搜索引擎为用户提供答案,并且能够执行基本任务,例如识别自然语音以设置提醒、管理日历、获取天气或新闻更新、搜索文件和文档等。
但有时Cortana可能会干扰设备驱动程序,并可能导致Windows 10中出现鼠标滞后或死机等问题。因此,在这种情况下,您始终可以在 Windows 10 上禁用 Cortana(disable Cortana on Windows 10),看看这是否能解决您的问题。如果没有,那么您可以再次启用它。

方法 7:回滚鼠标驱动程序(Method 7: Rollback Mouse Drivers)
1.按 Windows 键 + R 然后键入devmgmt.msc并按 Enter 打开设备管理器。(Device Manager.)

2.按Tab在设备管理器(Device Manager)中突出显示您的计算机名称,然后使用箭头键突出显示鼠标和其他指针设备。(Mice and other pointing devices.)
3.下一步,按右箭头键进一步展开鼠标(Mice)和其他指针设备。

4.再次使用向下箭头键选择列出的设备,然后按 Enter(Enter)打开其属性。(Properties.)
5.在设备触摸板属性(Device Touchpad Properties)窗口中再次按Tab键以突出显示常规选项卡。(General tab.)
6.一旦“常规(General)”选项卡以虚线突出显示,使用右箭头键切换到驱动程序选项卡。(driver tab.)

7.单击回滚驱动程序(Roll Back Driver),然后使用制表键突出显示“您为什么回滚(Why are you rolling back)”中的答案,并使用箭头键选择正确的答案。

8.然后再次使用 Tab 键选择是按钮(Yes button),然后按 Enter。
9.这应该回滚驱动程序,一旦该过程完成,重新启动您的 PC。并查看您是否能够 修复 Windows 10 问题上的鼠标滞后问题,(Fix Mouse Lags on Windows 10 Issue, )如果不能,则继续。
方法 8:禁用快速启动(Method 8: Disable Fast Startup)
快速启动(Fast Startup )是一项功能,可在您启动 PC 或关闭 PC 时提供更快的启动时间。(boot)这是一个方便的功能,适用于那些希望他们的 PC 快速工作的人。在全新的 PC 中,此功能默认启用,但您可以随时禁用它。
大多数用户的 PC 存在一些问题,然后在他们的 PC 上启用了快速启动功能。(Fast Startup)事实上,许多用户通过在他们的系统上简单地禁用快速启动来解决鼠标滞后或冻结问题。(disabling Fast Startup)

方法 9: (Method 9: )调整 USB 电源管理设置
1.按 Windows 键 + R 然后键入devmgmt.msc并按 Enter 打开设备管理器。(Device Manager.)

2.展开通用串行总线控制器(Expand Universal Serial Bus controllers)并连接有问题的USB设备。(USB)

3.如果您无法识别插入的USB设备,则需要在每个 USB 根集线器和控制器上执行这些步骤。(every USB Root Hubs and controllers.)
4.右键单击根集线器(Root Hub)并选择属性。(Properties.)

5.切换到电源管理(Power Management)选项卡并取消选中(uncheck)“允许计算机关闭此设备以节省电源(Allow the computer to turn off this device to save power)”。

6.对其他USB Root Hubs/controllers.
方法 10:将过滤器激活时间滑块设置为 0(Method 10: Set Filter Activation Time slider to 0)
1.按Windows Key + I 打开设置,然后单击设备。(click Devices.)

2.从左侧菜单中选择鼠标和触摸板,然后单击(Mouse & Touchpad)其他鼠标选项。(Additional mouse options.)

3.现在单击ClickPad 选项卡,然后单击设置。( ClickPad tab and then click Settings.)
4.单击高级(Advanced)并将过滤器激活时间滑块设置为 0。(set the Filter Activation Time slider to 0.)

5.重新启动您的 PC 以保存更改,看看您是否能够 修复蓝牙鼠标延迟(bluetooth mouse lag)或冻结问题(fix bluetooth mouse lag or freeze issues)。
受到推崇的:(Recommended:)
如果您已成功学习如何(How)在 Windows 10上修复鼠标滞后或冻结,(Fix Mouse Lags or Freezes on Windows 10)但如果您对本文仍有任何疑问,请随时在评论部分询问。
Mouse Lags or Freezes on Windows 10? 10 Effective ways to fix it!
If you have rеcently upgraded to Windows 10 then chances are you might facе this issυe where your mouse will lag or freeze suddenly. If this is happening to you then don’t worry as there are many other users who are facing this same issue. Although this might seems like a Windows Operating system issue but in reality, the issue occurs because of corrupt, outdated, or incompatible mouse drivers.
When you face this issue, you won’t be able to move your mouse much because the mouse cursor lags behind or leaps forward and sometimes it will also freeze for few milliseconds before it actually moves. Anyway, without wasting any time let’s see How to Fix Mouse Lags in Windows 10 with the help of the below-listed tutorial.

Before continuing, make sure:
- Try to temporarily disconnect any other USB peripherals, such as a pen drive, printer, etc. Then reboot your PC and again try to use your Mouse and see if this fixes the problem.
- Don’t use USB hubs to connect your Mouse, instead, directly connect your mouse to the USB port.
- Make sure to disconnect your USB mouse when using Touchpad.
- Try to disable your Antivirus software temporarily and see if this resolves the issue.
- Change USB port and check if the Mouse works, if still stuck with the issue then I recommend you try to use the USB Mouse in another PC and see if it works.
10 Effective ways to Fix Mouse Lags on Windows 10
Make sure to create a restore point just in case something goes wrong.
Method 1: Reinstall Mouse Driver
1.Press Windows Key + R then type control and hit Enter.

2.In device manager window, expand Mice and other pointing devices.
3.Right-click on your mouse device then select Uninstall.

4.If it asks for confirmation then select Yes.
5.Reboot your PC to save changes.
6.Windows will automatically install the default drivers for your Mouse.
Method 2: Update Graphics Card Driver
If you’re facing the issue where mouse lags or freezes suddenly in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

Method 3: Enable or Disable Scroll Inactive Windows
1.Press Windows Key + I to open Settings then click on Devices.

2.From the left-hand menu click on Mouse.
3.Find “Scroll inactive windows when I hover over them” and then disable or enable it few times to see if this resolves the issue.

4.Reboot your PC to save changes and see if you’re able to Fix Mouse Lags on Windows 10 Issue.
Method 4: End Task for Realtek Audio
1.Press Ctrl + Shift + Esc to open Task Manager.

2.Right-click on Realtekaudio.exe and select End Task.
3.See if you’re able to fix the issue, if not then disable Realtek HD Manager.
4.Switch to Startup tab and disable Realtek HD audio manager.

5.Reboot your PC to save changes and see if you’re able to Fix Mouse Lags on Windows 10 Issue.
Method 5: Update Mouse Drivers to Generic PS/2 mouse
1.Press Windows Key + X then select Device Manager.
2.Expand Mice and other pointing devices.
3.Select your Mouse device in my case it’s Dell Touchpad and press Enter to open its Properties window.

4.Switch to Driver tab and click on Update Driver.

5.Now select Browse my computer for driver software.

6.Next, select Let me pick from a list of device drivers on my computer.

7.Select PS/2 Compatible Mouse from the list and click Next.

8.After the driver is installed restart your PC to save changes.
Method 6: Disable Cortana
Cortana is Microsoft’s virtual assistant created for Windows 10. Cortana is designed to provide answers to the users, using the Bing search engine and is able to perform basic tasks like recognizing natural voice to set reminders, manage calendars, fetch weather or news updates, search for files and documents, etc.
But sometimes Cortana can interfere with the device drivers and can cause issues such as mouse lags or freezes in Windows 10. So in such cases, you can always disable Cortana on Windows 10 and see if this resolves your issue. If not then you can again enable it back.

Method 7: Rollback Mouse Drivers
1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Press Tab to highlight your computer name inside Device Manager and then use arrow keys to highlight Mice and other pointing devices.
3.Next, press right arrow key to further expand Mice and other pointing devices.

4.Again use down arrow key to select the device listed and hit Enter to open its Properties.
5.In Device Touchpad Properties window again press Tab key in order to highlight General tab.
6.Once the General tab is highlighted with dotted lines use the right arrow key to switch to driver tab.

7.Click on Roll Back Driver then use the tab key to highlight the answers in “Why are you rolling back” and use the arrow key to select the proper answer.

8.Then again use Tab key to select Yes button and then hit Enter.
9.This should roll back the drivers and once the process is complete reboot your PC. And see if you’re able to Fix Mouse Lags on Windows 10 Issue, if not then continue.
Method 8: Disable Fast Startup
Fast Startup is a feature that provides faster boot time when you start your PC or when you shut down your PC. It is a handy feature and works for those who want their PCs to work fast. In fresh new PCs, this feature is enabled by default but you can disable it anytime you want.
Most of the users had some issues with their PC then the Fast Startup feature is enabled on their PC. In fact, many users have resolved the mouse lags or freezes issue by simple disabling Fast Startup on their system.

Method 9: Adjust USB Power Management Settings
1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand Universal Serial Bus controllers and connect your USB device which is having issues.

3.If you can’t identify your plugged in USB device then you need to perform these steps on every USB Root Hubs and controllers.
4.Right-click on the Root Hub and select Properties.

5.Switch to the Power Management tab and uncheck “Allow the computer to turn off this device to save power“.

6.Repeat the above steps for the other USB Root Hubs/controllers.
Method 10: Set Filter Activation Time slider to 0
1.Press Windows Key + I to open Settings then click Devices.

2.Select Mouse & Touchpad from the left-hand menu and click Additional mouse options.

3.Now click the ClickPad tab and then click Settings.
4.Click Advanced and set the Filter Activation Time slider to 0.

5.Reboot your PC to save changes and see if you’re able to fix bluetooth mouse lag or freeze issues.
Recommended:
That’s if you have successfully learned How to Fix Mouse Lags or Freezes on Windows 10 but if you still have any queries regarding this article then please feel free to ask them in the comment section.