Windows 10从一开始就有一个严重的错误，它使用户 PC 上的文本变得模糊，并且用户在整个系统范围内都面临这个问题。因此，无论您转到系统设置^{(System Settings)}、Windows 资源管理器^{(Windows Explorer)}还是控制面板，由于^{(Control Panel)}Windows 10中的^{(Windows 10)}DPI Scaling Level for Displays功能，所有文本都会有些模糊。所以今天我们将讨论如何^(How)在Windows 10中更改显示器的^(Displays)DPI 缩放级别^{(DPI Scaling Level)}。

在 Windows 10 中更改显示器的 DPI 缩放级别

^{(Change DPI Scaling Level)}在Windows 10中更改显示器的 DPI 缩放级别^(Displays)

确保创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：使用设置应用程序更改显示器的 DPI 缩放级别^{(Method 1: Change DPI Scaling Level for Displays Using Settings App)}

1. 按Windows Key + I 打开设置^(Settings)，然后单击系统。^(System.)

按 Windows 键 + I 打开设置，然后单击系统

2. 从左侧菜单中，确保选择显示。^(Display.)

3. 如果您有多个显示器，请在顶部选择您的显示器。

4. 现在在更改文本、应用程序和其他项目的大小下，^{(Change the size of text, apps, and other items)}从下拉列表中选择DPI 百分比。^{(DPI percentage)}

确保将文本、应用程序和其他项目的大小更改为 150% 或 100% | 在 Windows 10 中更改显示器的 DPI 缩放级别

5. 单击立即^(Sign)退出链接以保存更改。

方法 2：在设置中更改所有显示器的自定义 DPI 缩放级别^{(Method 2: Change Custom DPI Scaling Level for All Displays in Settings)}

1. 按Windows Key + I 打开设置^(Settings)，然后单击系统。^(System.)

2. 从左侧菜单中，确保选择显示。^(Display.)

3. 现在在缩放^(Scale)和布局下单击自定义缩放。^{(Custom scaling.)}

现在在缩放和布局下单击自定义缩放

4. 为所有显示输入一个介于100% – 500%之间的自定义缩放大小，然后单击应用^(Apply)。

输入 100% - 500% 之间的自定义缩放大小，然后单击应用

5. 单击立即^(Sign)退出以保存更改。

方法 3：更改注册表编辑器中所有显示的自定义 DPI 缩放级别^{(Method 3: Change Custom DPI Scaling Level for All Displays in Registry Editor)}

1. 按 Windows 键 + R，然后键入regedit并按 Enter。

运行命令 regedit | 在 Windows 10 中更改显示器的 DPI 缩放级别

2. 导航到以下注册表^(Registry)项：

HKEY_CURRENT_USER\Control Panel\Desktop

3. 确保在左侧窗格中突出显示桌面^(Desktop)，然后在右侧窗格中双击LogPixels DWORD。

右键单击桌面，然后选择新建，然后单击 DWORD

注意：^(Note:)如果上面的DWORD不存在，需要创建一个，在桌面^(Desktop)上右击选择New > DWORD (32-bit) value。将此新创建的 DWORD 命名为LogPixels。

4.在Base下选择^(Base)Decimal ，然后将其值更改为以下任何数据，然后单击 OK：

DPI Scaling Level	Value data
Smaller 100% (default)	96
Medium 125%	120
Larger 150%	144
Extra Large 200%	192
Custom 250%	240
Custom 300%	288
Custom 400%	384
Custom 500%	480

双击 LogPixels 键，然后在 base 下选择 Decimal 并输入值

5.再次^(Again)确保桌面^(Desktop)突出显示并在右侧窗格中双击Win8DpiScaling。

双击桌面下的Win8DpiScaling DWORD | 在 Windows 10 中更改显示器的 DPI 缩放级别

注意：^(Note:)如果上面的DWORD不存在，需要创建一个，在桌面^(Desktop)上右击选择 New > DWORD (32-bit) value。将此 DWORD 命名为Win8DpiScaling。

6.如果您从上表中为LogPixels DWORD选择了 96，则现在将其值更改为 0，^{( 0 if you have chosen 96)}但如果您从表中选择了任何其他值，则将其值设置为 1。^{(value to 1.)}

更改 Win8DpiScaling DWORD 的值

7.单击确定^{(Click OK)}并关闭注册表编辑器^{(Registry Editor)}。

8. 重新启动您的 PC 以保存更改。

受到推崇的：^{(Recommended:)}

通过 TiWorker.exe 修复高 CPU 使用率^{(Fix High CPU Usage By TiWorker.exe)}
Windows 无法启动。最近的硬件或软件更改可能是原因^{(Windows failed to start. A recent hardware or software change might be the cause)}
通过 svchost.exe (netsvcs) 修复高 CPU 使用率^{(Fix High CPU Usage by svchost.exe (netsvcs))}
通过 RuntimeBroker.exe 修复高 CPU 使用率^{(Fix High CPU Usage by RuntimeBroker.exe)}

就是这样，您已经成功学习了如何在 Windows 10 中更改显示器的 DPI 缩放级别，^{(How To Change DPI Scaling Level for Displays in Windows 10)}但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

Change DPI Scaling Level for Displays in Windows 10

Windows 10 has a serious bug sincе it’s inception which makes text blurrеd on usеrs PC and the problem is faced system-wide by the user. So it doesn’t matter if уou go to System Settingѕ, Windows Explorer or Control Panel, all the text will be somewhat blurred becаuse of the DPI Scaling Level for Displays feature in Windows 10. So today we are going to discuss How To Change DPI Scaling Leνel for Displays in Windows 10.

Make sure to create a restore point just in case something goes wrong.

Method 1: Change DPI Scaling Level for Displays Using Settings App

1. Press Windows Key + I to open Settings and then click on System.

Press Windows Key + I to open Settings then click on System

2. From the left-hand menu, make sure to select Display.

3. If you have more than one display, then select your display at the top.

4. Now under Change the size of text, apps, and other items, select the DPI percentage from the drop-down.

Make sure to change the size of text, apps, and other items to 150% or 100% | Change DPI Scaling Level for Displays in Windows 10

5. Click on the Sign out now link to save changes.

Method 2: Change Custom DPI Scaling Level for All Displays in Settings

1. Press Windows Key + I to open Settings and then click on System.

2. From the left-hand menu, make sure to select Display.

3. Now under Scale and layout click Custom scaling.

Now under Scale and layout click Custom scaling

4. Enter a custom scaling size between 100% – 500% for all the displays and click on Apply.

Enter a custom scaling size between 100% - 500% and click apply

5. Click on Sign out now to save changes.

Method 3: Change Custom DPI Scaling Level for All Displays in Registry Editor

1. Press Windows Key + R then type regedit and hit Enter.

Run command regedit | Change DPI Scaling Level for Displays in Windows 10

2. Navigate to the following Registry key:

HKEY_CURRENT_USER\Control Panel\Desktop

3. Make sure you have highlighted Desktop in the left window pane and then in the right window pane double click on LogPixels DWORD.

Right-click on Desktop and then select New then click on DWORD

Note: If the above DWORD doesn’t exist, you need to create one, right-click on Desktop and select New > DWORD (32-bit) value. Name this newly created DWORD as LogPixels.

4. Select Decimal under Base then change its value to any of the following data and then click OK:

DPI Scaling Level	Value data
Smaller 100% (default)	96
Medium 125%	120
Larger 150%	144
Extra Large 200%	192
Custom 250%	240
Custom 300%	288
Custom 400%	384
Custom 500%	480

Double click on LogPixels key and then select Decimal under base and enter the value

5. Again make sure Desktop is highlighted and in the right window pane double click on Win8DpiScaling.

Double click on Win8DpiScaling DWORD under Desktop | Change DPI Scaling Level for Displays in Windows 10

Note: If the above DWORD doesn’t exist, you need to create one, right-click on Desktop and select New > DWORD (32-bit) value. Name this DWORD as Win8DpiScaling.

6. Now change its value to 0 if you have chosen 96 from the above table for LogPixels DWORD but if you have chosen any other value from the table then set its value to 1.

Change the value of Win8DpiScaling DWORD

7. Click OK and close Registry Editor.

8. Reboot your PC to save changes.

Recommended:

That’s it you have successfully learned How To Change DPI Scaling Level for Displays in Windows 10 but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

瑛武

About the author

我是一名专业的音频工程师，拥有超过 10 年的经验。我参与过各种各样的项目，从小型家庭音响系统到大型商业制作。我的技能在于创造出色的配乐和声音处理工具，让音乐听起来很棒。我对 Windows 10 也非常有经验，可以帮助您充分利用您的计算机系统。

在 Windows 10 中更改显示器的 DPI 缩放级别

^{(Change DPI Scaling Level)}在Windows 10中更改显示器的 DPI 缩放级别^(Displays)

方法 1：使用设置应用程序更改显示器的 DPI 缩放级别^{(Method 1: Change DPI Scaling Level for Displays Using Settings App)}

方法 2：在设置中更改所有显示器的自定义 DPI 缩放级别^{(Method 2: Change Custom DPI Scaling Level for All Displays in Settings)}

方法 3：更改注册表编辑器中所有显示的自定义 DPI 缩放级别^{(Method 3: Change Custom DPI Scaling Level for All Displays in Registry Editor)}

Change DPI Scaling Level for Displays in Windows 10