由于系统文件损坏或第三方防病毒软件干扰Windows安全系统,您可能会看到安全中心无法验证调用者并出现错误 (DC040780) 。(Security Center Failed to Validate Caller with Error (DC040780) )在本文中,我们将借助一些简单的解决方案来修复错误。
是什么导致安全中心(Security Center)无法验证调用者(Validate Caller)错误?
此错误通常是由于您的Windows 安全中心(Windows Security Center)与安装的第 3 方防病毒软件之间存在冲突造成的。但是,在本文中,我们已经积累了修复错误的所有可能解决方案。
安全中心(Security Center)无法验证调用方(Validate Caller),出现错误 DC040780(Error DC040780)
在检查任何解决方案之前,我们建议您更新您的操作系统( update your OS)。有时,更新本身可以解决问题。即使它不能解决错误,您至少可以确信该错误不是由于过时的操作系统造成的。
这些是修复安全中心(Security Center)无法验证调用者(Validate Caller)错误((Error) DC040780 ) 所需(DC040780)执行的操作。
- 删除第三方防病毒软件
- 禁用 Windows Defender
- 通过注册表(Registry)禁用Windows 安全(Windows Security)
- 禁用Acronis 主动保护(Acronis Active Protection)
- 在干净启动状态下进行故障排除
- 更新 BIOS。
- 将此通知您的第 3 方安全软件供应商
让我们详细谈谈它们。
1]删除(Remove)或暂时(Temporarily)禁用第三方防病毒(Third-Party Antivirus)
请记住(Remember),第三方防病毒软件可能会干扰Windows 安全(Windows Security)性。因此,您可以做两件事中的任何一件,删除第三方防病毒软件或禁用 Windows Defender(将在下文讨论)。
要删除任何第三方防病毒软件,您可以按照给定的步骤操作。
- 通过 Win + I.启动 设置 。(Settings )
- 单击 应用程序 (Apps )并搜索您的防病毒软件。
- 选择防病毒软件,然后单击 卸载。(Uninstall.)
最后,按照屏幕上的说明删除第三方防病毒软件。希望(Hopefully)它将解决错误。
2]禁用Windows Defender并查看
如果您不想删除第三方防病毒软件,无论出于何种原因,您都可以禁用 Windows Defender并检查问题是否仍然存在。为此,您必须遵循给定的步骤。
- 通过Win + I.启动 设置。(Settings )
- 单击 Update & Security > Windows Security > Firewall & network protection.
- 单击 (活动) ((active) )网络并禁用切换。
- 否,返回 Windows 安全 (Windows Security )并单击 打开 Windows 安全。(Open Windows Security.)
- 从“病毒和威胁防护保护”中, (Virus & threat protection protection”, )单击 管理设置。(Manage settings.)
- 并禁用所有切换。
最后,重新启动计算机并检查问题是否已解决。
3]禁用Windows安全
我们在本文上面已经描述了“Security Center failed to validate caller with error DC040780”的问题是由于第三方安全软件和Windows安全(Windows Security)之间的冲突引起的。因此(Therefore),您可以禁用Windows 安全(Windows Security)并继续使用您的第三方防病毒软件。
下面列出了禁用Windows 安全性的步骤:(Windows Security)
- 启动注册表编辑器。
- 导航到我们将在下面描述的注册表编辑器中的路径。(Registry Editor)
- 选择SecurityHealthService键。将其值更改为 4。
- 现在,选择另一个名为wscsvc的(wscsvc)注册表(Registry)项。将其值更改为 4。
- 关闭注册表编辑器。
- 重启你的电脑。
让我们深入了解一下这个过程:
Win + R键启动运行(Run)对话框。键入并单击确定。(OK. Click Yes)如果您收到UAC提示,请单击是。这将启动注册表编辑器(Registry Editor)。regedit
在注册表编辑器(Registry Editor)中,您必须导航到下面写的路径。为此,只需复制它,将其粘贴到注册表编辑器(Registry Editor)的地址栏中,然后按 Enter(Enter)。
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
现在,向下滚动并找到一个名为SecurityHealthService的密钥。找到后,选择它。
在右侧,您将找到一个名为Start的(Start)DWORD值。您必须将此值更改为 4。为此,双击DWORD条目并输入值 4。之后,单击确定保存更改。
现在,在同一路径下,向下滚动以找到另一个名为wscsvc的(wscsvc)注册表(Registry)项。找到后,选择它。该键的右侧还有一个DWORD条目,名为(DWORD)Start。
您必须将其值从默认值更改为 4。为此,请双击它并输入 4。之后,单击确定。这将保存您所做的更改。
关闭注册表编辑器(Registry Editor)并重新启动您的设备。
4]禁用(Disable)Acronis Active Protection(Acronis Active Protection)
一些用户报告说他们遇到了由于Acronis True Image软件引起的错误。为了摆脱它,他们禁用了Acronis Active Protection。你也可以试试这个方法,看看是否有帮助。
下面列出了禁用Acronis true Image Active Protection的步骤:(Image Active Protection)
- 在您的系统上启动Acronis True Image 。
- 单击主动保护(Active Protection)。您将在左侧窗格中找到它。
- 单击显示Acronis 保护已打开(Acronis Protection is on)的开关。之后,它应该说Acronis Protection is off。
禁用主动保护后,检查问题是否解决。
5]在干净启动状态下进行故障排除
该错误可能是由于第三方防病毒软件干扰了您的操作系统的正常运行。因此,在干净启动状态下进行故障排除(troubleshoot in Clean Boot State )以检查导致错误的原因并将其删除以解决问题。
6]更新您的系统BIOS
如果上述方法均未解决您计算机上的问题,请考虑更新您的系统 BIOS(updating your system BIOS)。
它应该有帮助。
7] 将此(Bring)通知您的第3方安全软件供应商
您应该就此问题写信给您的第 3 方安全软件供应商,并要求他们尽快解决该错误。您可以从Internet(Internet)上获取供应商的详细联系信息。
为什么我无法启动Windows 安全中心(Windows Security Center)?
有时,由于错误,用户无法打开Windows 安全性(Windows Security)。当他们打开Windows 安全中心(Windows Security Center)时,他们会看到一条消息,上面写着“安全中心服务已关闭(The Security Center service is turned off)”。如果他们尝试打开安全中心(Security Center),他们将收到以下消息:
无法启动 Windows 安全中心服务(The Windows Security Center service can’t be started)
导致此错误的原因有很多,例如:
- 您没有正确配置安全中心(Security Center)。
- 您访问了一个恶意网站,由于该恶意软件已进入您的系统,该恶意软件已关闭Windows 安全(Windows Security)性,以便黑客可以完全控制您的系统。
Windows 安全(Windows Security)性是 Windows 10 用户必不可少的服务。它会持续扫描您的系统是否存在恶意软件、病毒和其他安全问题。
希望您能够使用这些解决方案修复错误。
相关帖子(Related posts):Windows 安全说没有安全提供程序(Windows Security says No Security Providers)。
Security Center Failed to Validate Caller with Error DC040780
You may see Security Center Failed to Validate Caller with Error (DC040780) because of a corrupted system file or due to the interference of a third-party antivirus with the Windows security system. In this article, we are going to fix the error with the help of some simple solutions.
What causes Security Center Failed to Validate Caller error?
This error is usually caused due to some conflict between your Windows Security Center and the installed 3rd-party antivirus software. However, in this article, we have accumulated all the possible solutions to fix the error.
Security Center Failed to Validate Caller with Error DC040780
Before checking any solutions, we recommend you update your OS. Sometimes, updating itself can fix the issue. Even if it doesn’t resolve the error, you will at least be assured that the error is not because of an outdated OS.
These are the things you need to do to fix Security Center Failed to Validate Caller with Error (DC040780).
- Remove Third-Party Antivirus
- Disable Windows Defender
- Disable Windows Security via Registry
- Disable the Acronis Active Protection
- Troubleshoot in Clean Boot State
- Update BIOS.
- Bring this to the notice of your 3rd-party security software vendor
Let us talk about them in detail.
1] Remove or Temporarily disable Third-Party Antivirus
Remember, third-party antiviruses can interfere with Windows Security. So, you can do either of two things, remove third-party antivirus or disable Windows Defender(will discuss hereinafter).
To remove any third-party antivirus, you can follow the given steps.
- Launch Settings by Win + I.
- Click Apps and search out your antivirus.
- Select the Antivirus and click Uninstall.
Finally, follow the on-screen instructions to remove the third-party antivirus. Hopefully, it will resolve the error.
2] Disable Windows Defender and see
If you don’t want to remove the third-party antivirus, for whatever reason, you can disable Windows Defender and check if the issue persists. For that, you have to follow the given steps.
- Launch Settings by Win + I.
- Click Update & Security > Windows Security > Firewall & network protection.
- Click on the (active) network and disable the toggle.
- No, go back to Windows Security and click Open Windows Security.
- From “Virus & threat protection protection”, click Manage settings.
- And disable all the toggles.
Finally, restart your computer and check if the issue is fixed.
3] Disable Windows Security
We have described above in this article that the issue “Security Center failed to validate caller with error DC040780” is caused due to the conflict between the third-party security software and Windows Security. Therefore, you can disable Windows Security and continue using your third-party antivirus software.
The steps to disable the Windows Security are listed below:
- Launch the Registry Editor.
- Navigate to the path in the Registry Editor that we will describe below.
- Select the SecurityHealthService key. Change its value to 4.
- Now, select another Registry key with the name wscsvc. Change its value to 4.
- Close the Registry Editor.
- Restart your computer.
Let’s have a deep look at the process:
Launch the Run dialog box by pressing Win + R keys. Type regedit
and click OK. Click Yes if you get the UAC prompt. This will launch the Registry Editor.
In the Registry Editor, you have to navigate to the path written below. For this, simply copy it, paste it into the address bar of the Registry Editor, and hit Enter.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
Now, scroll down and find a key, named SecurityHealthService. Once you find it, select it.
On the right side, you will find a DWORD value, named Start. You have to change this value to 4. For this, double-click on the DWORD entry and enter the value 4. After that, click OK to save the changes.
Now, under the same path, scroll down to find another Registry key, named wscsvc. Once you find it, select it. This key also has a DWORD entry on the right side, named Start.
You have to change its value from its default value to 4. To do so, double-click on it and enter 4. After that, click OK. This will save the changes you have made.
Close the Registry Editor and reboot your device.
4] Disable the Acronis Active Protection
Some users have reported that they were encountering the error due to Acronis True Image software. To get rid of it, they have disabled the Acronis Active Protection. You can also try this method and see if it helps.
The steps to disable Acronis true Image Active Protection are listed below:
- Launch Acronis True Image on your system.
- Click Active Protection. You will find it on the left pane.
- Click on the switch that says Acronis Protection is on. After that, it should say Acronis Protection is off.
After disabling Active protection, check whether the issue is solved or not.
5] Troubleshoot in Clean Boot State
The error can be because of a third-party antivirus interfering with the normal functioning of your OS. So, troubleshoot in Clean Boot State to check what’s causing the error and remove it to fix the issue.
6] Update your system BIOS
If none of the above methods fixed the issue on your computer, consider updating your system BIOS.
It should help.
7] Bring this to the notice of your 3rd-party security software vendor
You should write to your 3rd-party security software vendor about this issue and ask them to resolve the error as soon as possible. You can get the contact details of the vendor from the Internet.
Why can’t I start Windows Security Center?
Sometimes, due to an error, users cannot turn on Windows Security. When they open Windows Security Center, they see a message that says “The Security Center service is turned off.” If they try to turn on the Security Center, they will get the following message:
The Windows Security Center service can’t be started
There are many causes of this error, such as:
- You have not configured the Security Center correctly.
- You have visited a malicious website due to which malware has entered your system that has turned the Windows Security off so that the hacker can have complete control of your system.
Windows Security is an essential service for windows 10 users. It continuously scans your system for malicious software, viruses, and other security issues.
Hopefully, you have been able to fix the error with these solutions.
Related posts: Windows Security says No Security Providers.