有时，您可能会在 Windows 10/8/7 计算机上看到某些程序已停止响应的消息。此类程序未响应^{(Programs not responding)}或程序已停止工作或响应^{(Program has stopped working or responding )}消息的原因可能很多，并且故障排除选项也不同。我们已经涵盖了以下主题：

1. PowerPoint 没有响应^{(PowerPoint is not responding)}
2. Outlook 没有响应^{(Outlook is not responding)}
3. DNS 服务器没有响应^{(DNS Server is not responding)}
4. Windows 没有响应^{(Windows is not responding)}
5. Internet Explorer 没有响应。

今天我们将看看您可能会遇到程序无响应^{(Program not responding)}消息的其他一些常见情况。

^(Programs)Windows 11/10程序没有响应

如果程序^(Program)没有响应，则意味着程序中出现了问题，因此它与Windows的交互速度比平时慢。您可以选择等待它自动开始工作，也可以终止或终止该进程。

造成这种情况的可能原因是：^{(The probable cause for this are:)}

• 缺乏可供程序正常启动或运行的计算机资源
• 计算机感染了恶意软件
• 两个软件之间的冲突
• 与操作系统版本不兼容
• 程序的文件或注册表项可能已损坏

如果您遇到这种情况，您可以采取的措施是：^{(The actions you could take if you face such a situation are:)}

• 终止或终止程序进程^{(Terminate or kill the program process)}
• 使用防病毒软件全面扫描您的 PC。
• 重新启动程序，看看它是否工作
• 重启电脑看看是否正常运行
• 查看以Clean Boot State^{(Clean Boot State)}启动时是否出现问题。在这里，您可以手动尝试并识别冲突。
• 重新安装软件
• 禁用硬件图形加速^{(hardware graphics acceleration)}并查看。
• 如果程序使用加载项或扩展，请在安全模式下^{(Safe Mode)}启动程序并查看。如果需要，请检查加载项并禁用或删除违规者。要在无插件模式或安全模式^{(Safe Mode)}下运行程序，您通常打开“运行”^(Run)框，输入程序的名称/可执行文件并使用 /safe 参数。例如。  outlook /safe。
• 尝试增加内存。

最后一件事！您还可以优化计算机的性能^{(optimize the computer for performance)}。清理磁盘空间^{(Clean up Disk Space)}，卸载不需要的程序，运行程序^(Program)和系统维护疑难解答。

打开提升的命令提示符^{(Command Prompt)}，键入以下内容并按Enter以运行性能疑难解答^{(Performance Troubleshooter)}。

msdt.exe /id PerformanceDiagnostic

此疑难解答程序可帮助用户调整设置以提高操作系统速度和性能。

打印机没有响应

如果您收到打印机无响应^{(Printer not responding)}消息，请运行打印机疑难解答^{(Printer Troubleshooter)}并查看。确保您使用的是最新版本的打印机驱动程序^{(Printer Driver)}。

程序已停止工作

如果您收到“程序^(Program)已停止工作”消息，这些帖子也会对您有所帮助：

• Microsoft Word 已停止工作
• 显示驱动程序停止响应^{(Display driver stopped responding)}
• 现代安装主机已停止工作^{(Modern Setup Host has stopped working)}
• Microsoft 安装程序引导程序已停止工作^{(Microsoft Setup Bootstrapper has stopped working)}
• Windows 主机进程 Rundll32 已停止工作
• 保护存根已停止工作
• 托管 SQL Server 安装程序已停止工作
• COM 代理已停止工作^{(COM Surrogate has stopped working)}。

All the best!

Programs not responding in Windows 11/10

At times, you may haνe seen a message that some program had ѕtopped responding on your Windows 10/8/7 computer. The reasons for sυch Programs not responding or Program has stopped working or responding message could be many and there the troubleshooting options different too. We have already covered the following  subjects:

1. PowerPoint is not responding
2. Outlook is not responding
3. DNS Server is not responding
4. Windows is not responding
5. Internet Explorer is not responding.

Today we will take a look at some other common scenarios where you may encounter a Program not responding message.

Programs not responding in Windows 11/10

If a Program is not responding, it means that a problem has occurred in the program and it is, therefore, interacting more slowly than usual with Windows. You can choose to wait for it to start working automatically or you can terminate or kill the process.

The probable cause for this are:

• Lack of computer resources available for the program to start or run properly
• Computer infected with malware
• A conflict between two software
• Incompatibility with the operating system version
• File or registry entries of the program may have been corrupted

The actions you could take if you face such a situation are:

• Terminate or kill the program process
• Full scan your PC with your antivirus software.
• Relaunch the program and see if it work
• Restart the computer and see if it runs properly
• See if the problem occurs when you boot in Clean Boot State. Here you can manually try and identify conflicts.
• Reinstall the software
• Disable hardware graphics acceleration and see.
• If the program uses add-ins or extensions, start the program in Safe Mode and see. If need be, check the add-ins and disable or remove the offenders. To run a program in No add-ons mode or Safe Mode, you usually open the Run box, type the name/executable of the program and use the /safe parameter. Eg.  outlook /safe.
• Try and increase the RAM.

One last thing! You could also optimize the computer for performance. Clean up Disk Space, uninstall unwanted programs, run the Program & System Maintenance Troubleshooters.

Open an elevated Command Prompt, type the following and hit Enter to run the Performance Troubleshooter.

msdt.exe /id PerformanceDiagnostic

This troubleshooter helps the user adjust settings to improve operating system speed and performance.

Printer not responding

If you receive a Printer not responding message run the Printer Troubleshooter and see. Make sure that you are using the latest version of the Printer Driver.

Program has stopped working

These posts too will help you if you receive a Program has stopped working message:

• Microsoft Word has stopped working
• Display driver stopped responding
• Modern Setup Host has stopped working
• Microsoft Setup Bootstrapper has stopped working
• Windows Host Process Rundll32 has stopped working
• Protection Stub has stopped working
• Managed SQL Server Installer has stopped working
• COM Surrogate has stopped working.

All the best!

Related posts

• Windows Apps or Programs在Windows 11/10立即打开和关闭

• 在Windows 10中使用DISM时，远程procedure call失败了错误

• Background Intelligent Transfer Service不在Windows 11/10工作

• Fix Device encryption在Windows 11/10中暂时暂停错误

• 如何在Windows 10中打开和读取Small Memory Dump（DMP）文件

• 视窗10 Get Help应用程序无法正常工作

• Windows 10安装期间不兼容的Video card错误

• Start Menu无法打开或Start Button在Windows 11/10中不起作用

• Movies & TV app freezing，无效或在Windows 10上开放

• Windows Security在Windows 10中说No Security Providers

• 您的组织已关闭Windows 10中的自动更新

• Windows无法从Windows 10中的路由器获取Network Settings

• 无法在Windows 10映射Network drive

• Fix Windows 10 Printer Printer Troubleshooter的问题

• Intel Thunderbolt Dock software不适用于Windows 10

• 常见VPN error代码的故障排除及对Windows 10解决方案

• 无法在Windows 11/10中拖放文件或文件夹

• Windows Security中glance page的安全性在Windows 10中是空白的

• Windows 10 Photos app使用File system错误崩溃

• 在Windows 10中无法使用您的Phone app接收或拨打电话