修复 Windows 无法安装所需文件 0x80070570： (Fix Windows Cannot Install Required Files 0x80070570: )如果您正在进行更新或升级，那么您可能会收到错误(Error)代码 0x80070570，并且由于此错误，安装将无法继续。该信息以及错误表明安装程序找不到阻止其继续更新或升级的某些文件。这是与错误消息一起的信息：
Windows 无法安装所需的文件。该文件可能已损坏或丢失。确保安装所需的所有文件都可用并重新启动安装。错误代码：0x80070570。(Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available and restart the installation. Error code: 0x80070570.)
是什么导致错误Windows无法安装所需文件 0x80070570(Required Files 0x80070570)？
关于为什么会发生此错误没有特别的原因，但我们将尝试列出导致此错误的尽可能多的原因：
- 权限问题
- 损坏的注册表
- 损坏的系统文件
- 硬盘损坏或故障
- 病毒或恶意软件
- RAM 中的损坏或坏扇区
有时错误代码 0x80070570 也是因为在Windows(Windows)安装/升级过程中无法识别内置SATA驱动程序。(SATA)无论如何(Anyway)，不要再浪费时间了，让我们看看如何使用下面列出的故障排除步骤实际修复 Windows(Fix Windows)无法安装所需文件 0x80070570 。(Required Files 0x80070570)
修复 Windows(Fix Windows)无法安装所需文件 0x80070570(Required Files 0x80070570)
在尝试下面列出的任何方法之前，首先尝试再次重新启动安装过程，看看您是否能够毫无问题地安装/升级Windows 。
方法一：更新 BIOS(Method 1: Update BIOS)
如果您可以回到以前的版本并登录到Windows ，请尝试更新BIOS。
执行BIOS更新是一项关键任务，如果出现问题，可能会严重损坏您的系统，因此建议专家监督。
1.第一步是识别您的BIOS版本，按 Windows Key + R然后输入“ msinfo32 ”（不带引号）并按回车键打开系统信息(System Information)。
2. 一旦系统信息( System Information)窗口打开，找到BIOS Version/Date，然后记下制造商和BIOS版本。
3.接下来，访问您的制造商网站，例如在我的情况下是戴尔(Dell)，所以我将访问戴尔网站(Dell website)，然后输入我的计算机序列号或单击自动检测选项。
4.现在从显示的驱动程序列表中，我将单击BIOS并下载推荐的更新。
注意：更新(Note:)BIOS时请勿关闭计算机或断开电源，否则可能会损坏计算机。在更新期间，您的计算机将重新启动，您将短暂看到黑屏。
5.下载文件后，只需双击exe文件即可运行它。
6.最后，您已经更新了您的BIOS，这也可能 修复 Windows 无法安装所需文件 0x80070570。( Fix Windows Cannot Install Required Files 0x80070570.)
方法二：将SATA操作改为AHCI(Method 2: Change the SATA operation to AHCI)
1. 引导至BIOS（对于戴尔而言，在显示(Dell)戴尔(Dell)闪屏时按Delete或 F2 ，其他计算机可能使用不同的按钮）。
2.转到Drives > SATA Operation。（对于非戴尔来说会有所不同）
3.将SATA配置更改为AHCI。(SATA configuration to AHCI.)
4.按退出，选择Save / Exit.
5.在尝试重新安装之前关闭您的 PC 并断开所有USB设备。(USB)
6.如果错误仍未解决，请将SATA操作更改为默认值并重新启动。
方法三：检查安装介质是否损坏(Method 3: Check the installation media is not damaged)
有时也可能由于安装介质损坏而导致错误，为了确保不是这种情况，您需要从Microsoft网站再次下载Windows ISO并创建可启动安装DVD或使用USB 闪存(USB Flash)驱动器.
方法 4：运行系统文件检查器 (SFC) 和检查磁盘 (CHKDSK)(Method 4: Run System File Checker (SFC) and Check Disk (CHKDSK))
1.按Windows Key + X然后单击命令提示符（管理员）。( Command Prompt(Admin).)
2.现在在cmd中输入以下内容并回车：
Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)
3.等待上述过程完成，完成后重新启动您的电脑。
4.接下来，从这里运行 CHKDSK Fix File System Errors with Check Disk Utility(CHKDSK)。
5.让上述过程完成并再次重新启动您的 PC 以保存更改。
Method 5: Run MemTest86+
注意：(Note:)在开始之前，请确保您可以访问另一台 PC，因为您需要将Memtest86+下载并刻录到光盘或USB闪存驱动器。
1.将USB闪存驱动器连接到您的系统。
2.下载并安装Windows Memtest86 USB Key 自动安装程序(Windows Memtest86 Auto-installer for USB Key)。
3.右键单击刚刚下载的图像文件，然后选择“在此处提取(Extract here)”选项。
4.解压后，打开文件夹并运行Memtest86+ USB Installer。
5.选择您插入的USB驱动器来刻录MemTest86软件（这将格式化您的USB驱动器）。
6.完成上述过程后，将USB插入PC，这会给出 Windows 无法安装所需文件 0x80070570 错误消息。( Windows Cannot Install Required Files 0x80070570 error message.)
7.重新启动您的 PC 并确保选择从USB闪存驱动器启动。
8.Memtest86 将开始测试系统中的内存损坏。
9.如果你通过了所有的测试，那么你可以确定你的记忆工作正常。
10.如果某些步骤不成功，那么Memtest86会发现内存损坏，这意味着您的“Windows 无法安装所需文件 0x80070570(Required Files 0x80070570) ”是因为内存损坏/损坏。
11.为了修复Windows无法安装所需文件0x80070570( Fix Windows Cannot Install Required Files 0x80070570) ，如果发现坏内存扇区，您将需要更换您的RAM 。
方法 6：使用 Microsoft 管理控制台(Method 6: Using Microsoft Management Console)
1.使用Windows安装媒体或恢复光盘打开命令提示符。(Open Command Prompt)
2.在cmd中输入以下命令并回车(Enter)：mmc
3.这将打开Microsoft 管理控制台(Microsoft Management Console)，然后从菜单中单击文件并选择(File)Add/Remove Snap-in.
4.从左侧窗格（管理单元(Snap-in)）中选择计算机管理(Computer Management)，然后单击添加。(Add.)
5.从下一个屏幕中选择本地计算机(Local Computer from the next screen)，然后单击完成(Finish)，然后单击确定。
6.展开计算机管理(Computer Management)并双击文件夹进行导航：
System Tools > Local Users and Groups > Users
7.现在从右侧窗口双击管理员。(Administrator.)
8.取消选中帐户已禁用(Uncheck Account is disabled)，然后选择确定。
9.右键单击管理员(Administrator)并选择设置密码(Set Password)。
10.重新启动您的PC，这应该可以解决问题。
对于Windows 家庭(Windows Home)版用户，您将无法执行上述步骤，而是打开命令提示符，然后键入以下命令并按Enter：
net user administrator /active:yes
net user administrator password /active:yes
注意：(Note:)替换上述步骤中的密码以设置您自己的管理员帐户密码。
为你推荐：(Recommended for you:)
就是这样，您已成功修复 Windows 无法安装所需文件 0x80070570 错误(Fix Windows Cannot Install Required Files 0x80070570 error)，但如果您对本指南仍有任何疑问，请随时在评论部分提出。
Fix Windows Cannot Install Required Files 0x80070570
Fix Windows Cannot Install Required Files 0x80070570: If you are in the middle of the update or upgrade then it’s possible that you may receive the Error code 0x80070570 and the installation won’t proceed because of this error. The information along with error says that the installer can’t find certain files which prevent it to continue the update or upgrade. This is the information along with the error message:
Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available and restart the installation. Error code: 0x80070570.
What causes the error Windows Cannot Install Required Files 0x80070570?
There is no particular cause as to why this error occurs but we will try list as many reasons possible which lead to this error:
- Permission Issues
- Corrupted Registry
- Corrupt System Files
- Damaged or faulty Hard Disk
- Virus or Malware
- Damaged or Bad sectors in RAM
Sometimes the error code 0x80070570 is also caused because the built-in SATA drivers aren’t recognized during the Windows install/upgrade. Anyway, without wasting any more time let’s see how to actually Fix Windows Cannot Install Required Files 0x80070570 with the below-listed troubleshooting steps.
Fix Windows Cannot Install Required Files 0x80070570
Before trying any of the below-listed methods first try to restart the install process once again and see if you are able to install/upgrade Windows without any problem.
Method 1: Update BIOS
If you can go back to your previous build and log on to Windows then try to update the BIOS.
Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, an expert supervision is recommended.
1.The first step is to identify your BIOS version, to do so press Windows Key + R then type “msinfo32” (without quotes) and hit enter to open System Information.
2.Once the System Information window opens locate BIOS Version/Date then note down the manufacturer and BIOS version.
3.Next, go to your manufacturer’s website for e.g in my case it’s Dell so I will go to Dell website and then I will enter my computer serial number or click on the auto detect option.
4.Now from the list of drivers shown I will click on BIOS and will download the recommended update.
Note: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.
5.Once the file is downloaded, just double click on the Exe file to run it.
6.Finally, you have updated your BIOS and this may also Fix Windows Cannot Install Required Files 0x80070570.
Method 2: Change the SATA operation to AHCI
1.Boot into the BIOS (for Dell press Delete or F2 while the Dell splash screen is showing, other computers may use a different button).
2.Go to Drives > SATA Operation. (will be different for a non-Dell)
3.Change SATA configuration to AHCI.
4.Press escape, choose Save / Exit.
5.Shut down your PC and disconnect all USB devices before trying to reinstall.
6.If the error is not resolved again change the SATA operations to default and reboot.
Method 3: Check the installation media is not damaged
Sometimes the error can also be caused because the installation media might be damaged and in order to make sure this is not the case here you need to download the Windows ISO again from the Microsoft website and create a bootable installation DVD or using a USB Flash drive.
Method 4: Run System File Checker (SFC) and Check Disk (CHKDSK)
1.Press Windows Key + X then click on Command Prompt(Admin).
2.Now type the following in the cmd and hit enter:
Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)
3.Wait for the above process to finish and once done restart your PC.
4.Next, run CHKDSK from here Fix File System Errors with Check Disk Utility(CHKDSK).
5.Let the above process complete and again reboot your PC to save changes.
Method 5: Run MemTest86+
Note: Before starting, make sure you have access to another PC as you will need to download and burn Memtest86+ to the disc or USB flash drive.
1.Connect a USB flash drive to your system.
2.Download and install Windows Memtest86 Auto-installer for USB Key.
3.Right-click on the image file which you just downloaded and select “Extract here” option.
4.Once extracted, open the folder and run the Memtest86+ USB Installer.
5.Choose your plugged in USB drive to burn the MemTest86 software (This will format your USB drive).
6.Once the above process is finished, insert the USB to the PC which is giving the Windows Cannot Install Required Files 0x80070570 error message.
7.Restart your PC and make sure that boot from the USB flash drive is selected.
8.Memtest86 will begin testing for memory corruption in your system.
9.If you have passed all the test then you can be sure that your memory is working correctly.
10.If some of the steps were unsuccessful then Memtest86 will find memory corruption which means that your “Windows Cannot Install Required Files 0x80070570” is because of bad/corrupt memory.
11.In order to Fix Windows Cannot Install Required Files 0x80070570, you will need to replace your RAM if bad memory sectors are found.
Method 6: Using Microsoft Management Console
1.Open Command Prompt using Windows installation media or recovery disc.
2.Type the following command into cmd and hit Enter: mmc
3.This will open Microsoft Management Console then click File from the menu and select Add/Remove Snap-in.
4.From the left-hand pane (Snap-in) select Computer Management and then click Add.
5.Select Local Computer from the next screen and then click Finish followed by OK.
6.Expand Computer Management and double click on folders to navigate:
System Tools > Local Users and Groups > Users
7.Now from the right window double click on Administrator.
8.Uncheck Account is disabled and select Ok.
9.Right click Administrator and select Set Password.
10.Reboot your PC and this should fix the issue.
For Windows Home edition users, you won’t be able to follow above steps, instead, open command prompt then type the following command and hit Enter:
net user administrator /active:yes
net user administrator password /active:yes
Note: replace password in above step to set your own password for this administrator account.
Recommended for you:
That’s it you have successfully Fix Windows Cannot Install Required Files 0x80070570 error but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.
